566441
11
Zoom out
Zoom in
Previous page
1/72
Next page
−−
×
×
×
×
ENGLISH
SPARK PLUG
Recommended Spark Plugs:
SPARK ARRESTER
Spark Arrester Removal (standard types)
SPARK PLUG WRENCH
SEALING
WASHER
0.70 0.80 mm
(0.028 0.031 in)
SIDE
ELECTRODE
NUT
SPARK PLUG
6 mm NUTS
AIR CLEANER
BREATHER TUBE
SPARK ARRESTER
IGNITION COIL/
SPARK PLUG CAP
CLAMP
620mm
STUD BOLT
6mmBOLTS
5 8 mm SCREW
11
BKR7E-E (NGK)
K22PR-UR (DENSO)
The recommended spark plug has the correct heat range for
normal engine operating temperatures.
An incorrect spark plug can cause engine damage.
For good performance, the spark plug must be properly gapped
and free of deposits.
Measure the spark plug
electrode gap with a wire-
type feeler gauge. Correct the
gap, if necessary, by carefully
bending the side electrode.
The gap should be:
0.70 0.80 mm (0.028 0.031 in)
Install the spark plug carefully,
by hand, to avoid cross-
threading.
When installing a new spark plug, tighten 1/2 turn after the spark
plug seats to compress the washer.
When reinstalling the original spark plug, tighten 1/8 1/4 turn
after the spark plug seats to compress the washer.
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
Remove the nut from the ignition coil, and remove the ignition
coil/spark plug cap. Remove any dirt from around the spark plug
area.
Inspect the spark plug.
Replace it if damaged or
badly fouled, if the sealing
washer is in poor condition,
or if the electrode is worn.
Remove the spark plug with a
5/8-inch spark plug wrench.
The spark arrester must be serviced every 6 months or 100 hours
to keep it functioning as designed.
If the engine has been running, the muffler will be hot. Allow it to
cool before servicing the spark arrester.
Remove the three 6 mm nuts and breather tube from the air
cleaner, remove the air cleaner, and remove the 6 20 mm
stud bolt.
Remove the three 6 mm bolts from the muffler protector, and
remove the muffler protector.
Removethe5 8mmscrewfromthesparkarrester,and
remove the spark arrester from the muffler.
After the spark plug is seated, tighten with a 5/8-inch spark plug
wrench to compress the sealing washer.
Set the harness in the clamp portion of the ignition coil/spark
plug cap. Then, attach the ignition coil to the spark plug and
tighten the nut securely.
1.
2.
4.
3.
5.
6.
7.
8.
9.
1.
2.
3.
07/06/21 11:45:30 32Z3S600_011
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda iGX440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda iGX440 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda iGX440

Honda iGX440 User Manual - German, Dutch, Italian - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info