566438
12
Zoom out
Zoom in
Previous page
1/60
Next page
−−
ENGLISH
SPARK PLUG
Recommended Spark Plugs:
SPARK ARRESTER (STANDARD TYPES)
Spark Arrester Removal
SPARK PLUG WRENCH
SEALING
WASHER
SIDE
ELECTRODE
SPARK PLUG
0.7 0.8 mm
(0.028 0.031 in)
SPARK PLUG CAP
NUT
AIR CLEANER
COVER
WING NUT
AIR CLEANER
ELEMENT
SILENCER
NOSE
GASKET
MUFFLER
PROTECTOR
6 mm SCREW
MUFFLER
SPARK ARRESTER
5 mm SCREWS
5 mm SCREWS
5 mm SCREWS
12
BPR6ES (NGK)
W20EPR-U (DENSO)
The recommended spark plug has the correct heat range for
normal engine operating temperatures.
An incorrect spark plug can cause engine damage.
For good performance, the spark plug must be properly gapped
and free of deposits.
Measure the spark plug
electrode gap with a wire-
type feeler gauge. Correct the
gap, if necessary, by carefully
bending the side electrode.
The gap should be:
0.7 0.8 mm (0.028 0.031 in)
Install the spark plug carefully,
by hand, to avoid cross-
threading.
When installing a new spark plug, tighten 1/2 turn after the spark
plug seats to compress the washer.
When reinstalling the original spark plug, tighten 1/8 1/4 turn
after the spark plug seats to compress the washer.
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
Inspect the spark plug.
Replace it if damaged or
badly fouled, if the sealing
washer is in poor condition,
or if the electrode is worn.
If the engine has been running, the muffler will be hot. Allow it to
cool before servicing the spark arrester.
The spark arrester must be serviced every 6 months or 100 hours
to keep it functioning as designed.
In Europe and other countries where the machinery directive
2006/42/EC is enforced, this cleaning should be done by your
servicing dealer.
Disconnect the spark plug cap, and remove any dirt from around
the spark plug area.
Remove the spark plug with a
13/16-inch spark plug wrench.
After the spark plug is seated, tighten with a 13/16-inch spark
plug wrench to compress the sealing washer.
Attach the spark plug cap to the spark plug.
Remove the nut, air cleaner cover, wing nut, air cleaner element,
silencer nose and gasket.
Remove the four 5 mm screws and one 6 mm screw from the
muffler protector, and remove the muffler protector.
Remove the two 5 mm screws from the spark arrester, and
remove the spark arrester from the muffler.
1.
2.
4.
3.
5.
6.
1.
2.
3.
7.
10/09/09 19:49:55 32Z8R800_012
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda iGX270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda iGX270 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda iGX270

Honda iGX270 User Manual - German, Dutch, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info