625684
23
Zoom out
Zoom in
Previous page
1/141
Next page
20
Skid plate and scraper
Adjust the skid plate for the auger housing ground clearance best
suited to your snow removal conditions.
The skid plate is installed at the rear (ET, ETD) or side (EW, EWD) of
the auger housing.
Remove the bolts to remove the skid plate, and then set the skid plate
to the convenient position and tighten the bolts securely.
To prevent accidental starting, turn the engine switch to the OFF
position and disconnect the spark plug cap.
1.Place the snow thrower on a level surface.
2.Track models: Depress the auger height lever, push down on the
handlebars to raise the auger off the ground, then slowly lower the
auger until the skid shoes contact the ground.
3.Loosen the skid bolts and move the skid plates up or down to obtain
the desired auger housing ground clearance. Tighten the skid bolts.
4.After adjusting, raise the auger off the ground, then slowly lower and
make sure both skid shoes contact the ground at the same time.
Auger Clearance:
For ordinary snow: 4.0–8.0 mm
For finishing: 0–5.0 mm
For use on uneven surfaces: 25.0–30.0 mm
5.Check the scraper ground clearance and readjust to 2.0-4.0mm if
necessary. Tighten scraper bolts.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HSS760A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HSS760A in the language / languages: English, French as an attachment in your email.

The manual is 10,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info