Manual Honda HSM1380i (page 55 of 524) (English, German, French, Spanish)

625494

Zoom out

Zoom in

1/524

Use the LOW position (i.e. position for clearing hardened snow) only

for clearing hardened snow. Do not set the auger housing in this

position while clearing soft snow or clearing on a bumpy road. This

can damage the road surface or cause stones to be thrown out of the

auger, which is very dangerous. Also, it can cause excessive wear and

damage to the snow clearing part of the snowblower.

When the ICS switch (HSM1380i) is in ON/the mode selector switch

(HSM1390i) is in AUTO or POWER, the auger housing automatically

rises while going in reverse.

In case the auger clutch switch is in the ON position, the auger is

automatically returned to the original position when the

snowblower is transporting forward again (ZE type).

If you want to stop the automatic movement of the auger housing,

turn off the ICS switch (HSM1380i) and change the mode selector

switch (HSM1390i) to the ‘‘SELF’’ position.

To stop the automatically movement of the auger housing, push the

control switch once to the opposite direction of the movement.

Frequent operation of the auger housing control switch activates the

protection function and makes the drive control warning indicator

(orange) blink, which prevents you from adjusting the snow clearing

part of the snowblower. Stop operating the auger housing control

switch and wait a few seconds before operating the switch again.

11/06/18 14:57:00 32V15630_054

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda HSM1380i in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 12,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda HSM1380i Manual

Product: