625494
52
Zoom out
Zoom in
Previous page
1/524
Next page
49
Do not use the snowblower on rough or uneven surfaces with the
auger ground clearance set for hard snow or surfaces.
This may cause serious damage to the snow blowing mechanism.
Adjust the skid and scraper in the following cases
Note that the road surface can be damaged and stones can be
thrown out of the auger if it comes in contact with the ground.
Return the skid and scraper to the original position when operating
the snowblower under normal conditions.
AUGER
Approx. 12 mm min.
7mmmin.
SCRAPER
SKID
SKID
SCRAPER AUGER
Raise to the uppermost
position.
Adjust the skid equally on both sides.
Be sure to tighten the skid and scraper bolts securely after making
adjustment.
When the auger interferes with the road surface while it is turning:
When clearing the snow from the graveled road:
Raise the auger approximately 12 mm from the ground and
secure the skid in this position.
To break down the hardened snow that dropped from the roof:
When the snow is too hard to dig in, making the snowblower rise
on the snow:
Raise the skid and scraper to the uppermost position of the
adjustment range with the auger in contact with the ground, and
secure the skid and scraper in position.
Secure the scraper by raising it 7 mm from the ground.
Do not clear the snow thoroughly from the ground. Leave some
on the ground to prevent gravel and other foreign material being
caught in the auger.
11/06/18 14:56:36 32V15630_051
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HSM1380i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HSM1380i in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info