625479
53
Zoom out
Zoom in
Previous page
1/265
Next page
−−
〜〜
50
Track-adjustment (track type only)
Adjusting procedure:
Tires (wheel type only)
Do not operate with a flat tire. This may cause the bead to come off.
Over inflation can cause premature tire failure. Inflate the tires to
manufacturer’s recommended tire pressure.
ADJUSTING NUT
TENSION BOLT
LOCK NUT
Increase tension
Decrease tension
25.0 30.0 mm
(0.98 1.18 in)
TRACK
ADJUSTMENT INTERVAL: Every year, before operation
Make sure the tracks are clean and dry before adjustment. The tracks
cannot be correctly adjusted if clogged with snow or debris, or coated
with ice.
With the snowblower resting on
its tracks, check track deflection
by pressing down midway
between the wheels with a force
of 15 kgf (33 lbf).
When correctly adjusted, track
deflection should be:
25.0 30.0 mm (0.98 1.18 in)
Loosen the left and right tension bolt lock nuts at the rear axle, and
turn the adjusting nuts to correctly tension both tracks.
After adjustment, tighten the lock nuts securely.
Before each use, check the tire
pressure with an air pressure
gauge.
80 100 kPa (0.8 1.0 kgf/cm , 11.4 14 psi)
1.
2.
Pressure:
09/08/27 14:51:30 3C743720_052
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HS622 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HS622 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 31,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info