Manual Honda HRX537VKEA (page 5 of 124) (English, German, Dutch, French, Italian, Spanish)

580848

Zoom out

Zoom in

1/124

ENGLISH

CONTROLS

FUEL VALVE

The fuel valve [1] opens and closes the

connection between the fuel tank and the

carburetor.

CUTTING-MEANS CONTROL

SYSTEM

The cutting-means control

lever [1] must be pulled back

against the handlebar to start

and run the engine. The

cutting means start to rotate

when the lever is pulled back

against the handlebar and the

recoil starter grip is pulled.

Continue to hold the

cutting-means lever fully

against the handlebar. This

will keep the engine and

cutting means rotating

smoothly and prevent premature wear to the cutting-means control

system.

Release the cutting-means control lever to stop the engine and stop

cutting means rotation whenever you need to leave the mower.

SELECT-DRIVE CONTROL

With the engine running and

the cutting means rotating,

slowly push the Select Drive

control [1] to propel the

mower forward.

Normal operation is with your

hand comfortably around the

handle bar and Select Drive

control. Push the Select Drive control with your thumb into the

indentation for boost operation (up a hill, or through thick grass).

You can reduce the ground speed by partially releasing the Select

Drive control.

Ground speed varies with terrain, grass height, slope, and grass

catcher weight. Moving the Select Drive knob (page 9) or varying how

far you push the Select Drive control forward allows you to maintain

the desired ground speed under constantly changing mowing

conditions.

Release the Select Drive control to disengage (stop) the rear wheels.

Disengage the drive when mowing around trees and other obstacles.

Push the mower around obstacles for better directional control.

Adjusting The Select Drive Control Knob

The Select Drive control

knob allows you to adjust the

maximum ground speed

when the Select Drive lever

is fully engaged.

Adjustment is from MIN to

MAX. With the Select Drive

lever fully engaged:

MIN will propel the

lawnmower at its slowest

speed.

MAX will propel the lawnmower at its fastest speed.

CUTTING HEIGHT ADJUSTMENT LEVERS

There are seven adjustment

settings. The cutting height

figures are approximate. The

actual height of cut grass will

vary with lawn and soil

conditions.

There is one adjustment

lever [1] for each wheel.

CLIP DIRECTOR

KNOB

The Clip Director knob [1]

controls catching,

mulching, and rear

discharge. The knob has

ten adjustment positions.

PRE-OPERATION CHECKS

CHECK YOUR LAWN

For your safety and for the safety of others, always inspect the area

before mowing.

Objects

Anything that can be picked up by the cutting means and thrown is a

potential hazard to you and others. Look for things like stones, sticks,

bones, and wire. Remove them from the mowing area.

People and Pets

People and animals near the mowing area can move into your path or

into a position where they could be struck by thrown objects. Clear the

area of people, especially children, and pets. Their safety is your

responsibility.

Lawn

Check the length and condition of the grass, so that you will know

what cutting height and mowing speed to use.

Avoid mowing wet grass. Not only will wet grass clog your mower

deck and collect in clumps on the lawn, it also gives poor traction,

increasing your risk of losing your footing.

OFF

[1]

SELECT DRIVE

CONTROL

MIN

MAX

[1]

CONTROL

MIN

MAX

[2]

20 mm

32 mm

46 mm

62 mm

75 mm

88 mm

100 mm

[1]

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRX537VKEA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 16,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda HRX537VKEA Manual

Product: