Manual Honda HRX537 HYEA (page 8 of 128) (English, German, Dutch, French, Italian, Spanish)

580898

Zoom out

Zoom in

1/128

ENGLISH

Installation

1. Raise the discharge

guard [1], and use

the grass bag handle

[3] to hook the grass

bag [2] onto the

mower deck as

shown.

2. Release the

discharge guard to

secure the grass

bag.

Removal

1. Raise the discharge

guard, grasp the

grass bag handle,

and remove the

grass bag.

2. Release the discharge guard.

3. When the grass bag is clear of the discharge guard, you can lift it

through the handlebar opening, or you can remove it to the rear of

the mower below the handlebar.

Cutting Height

Check the mower deck cutting

height settings, and be sure that

all four adjustment levers [1] are

set to the same cutting height

position.

To adjust cutting height, pull

each adjustment lever [1]

toward the wheel, and move it

into another notch.

If you are not sure what cutting

height to select, start with a

high setting and check the

appearance of the lawn after

mowing a small area. Then

readjust cutting height if

necessary.

Rear Shield

During normal use the rear

shield [1] is subject to

deterioration and wear.

Remove the grass bag and

raise the discharge guard [2] to

check the rear shield for cracks

or tears. If the rear shield is

excessively worn, have it

replaced by your authorized

Honda servicing dealer.

Clip Director

Clip Director Knob Adjustment

Adjust the Clip Director knob [1] in any one of the ten positions to

achieve the desired mowing results.

To adjust the Clip Director knob, pull the knob downward and towards

the rear of the mower. The knob adjusts a sliding door [2] from the

fully open BAG position to the fully closed MULCH position (see the

following page).

If a high resistance is noticed when moving the Clip Director knob

from side-to-side, excessive grass may have built up on top of the

sliding door.

Some grass accumulation in the discharge opening is normal when

the Clip Director is fully closed. To remove this grass, close the

discharge guard, fully open the Clip Director, start the engine, and

engage the blade control lever several times.

Important Safety Precaution

Always turn the engine off and disconnect the spark plug cap before

lifting the discharge guard to view or clean around the sliding door.

This will prevent contact with the rotating blades and prevent objects

from being thrown into the discharge area.

Sliding Door Position

The sliding door [2] can be positioned to produce different mowing

results. If the preferred sliding door position is unknown, install a

grass bag and begin mowing with the Clip Director knob [1] all the

way to the BAG position. Check the appearance of the lawn. As the

knob is moved towards the MULCH position, more grass will be

[3]

[1]

[2]

[1]

19 mm

32 mm

46 mm

62 mm

75 mm

88 mm

101 mm

[1]

[2]

[1]

[2] (fully closed)

DISCHARGE

GUARD

00X39VH7 Y210.book Page 8 Thursday, May 30, 2013 2:17 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRX537 HYEA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 26,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRX537 HYEA

Honda HRX537 HYEA User Manual - English - 23 pages

Honda HRX537 HYEA User Manual - German - 24 pages

Honda HRX537 HYEA User Manual - Dutch - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda HRX537 HYEA Manual

Product: