566394
50
Zoom out
Zoom in
Previous page
1/67
Next page
49
8. MAINTENANCE - continued
2. Use a spark plug wrench to remove the spark plug.
3. Inspect the plug; replace it if the electrode is worn, or if the insulator is
cracked or chipped.
4. If you are going to reuse the spark plug, remove carbon deposits with a stiff
wire brush.
5. Measure the spark plug gap with a suitable gauge. The gap should be 0.7-
0.8mm. Correct the gap, if necessary by bending the side electrode.
6. Install the spark plug carefully by hand, to avoid cross-threading.
7. After the spark plug seats, tighten with a spark plug wrench to compress
the washer.
If reinstalling the old spark plug, tighten ⅛ to ¼ turn after the spark plug
seats.
If installing a new spark plug, tighten ½ turn after the spark plug seats.
NOTICE
A loose spark plug can overheat and damage the engine.
Over tightening the spark plug can damage the threads in the cylinder
head.
8. Install the spark plug cap on the spark plug.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRU216M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRU216M2 in the language / languages: English as an attachment in your email.

The manual is 5,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info