566388
38
Zoom out
Zoom in
Previous page
1/67
Next page
37
7. TRANSPORTING/STORAGE - continued
Cleaning
Wash your mower after use, by hand, and be careful to prevent water from
entering the air cleaner and/or muffler.
NOTE: Using a garden hose or pressure washing equipment can force
water into the air cleaner, which will soak the filters and can enter the
carburettor or engine, causing damage.
Cold water on a hot engine can cause damage. If the engine has been
running, allow it to cool for at least 30 minutes before washing.
Cutter Housing
If using a garden hose or pressure washing equipment to clean the upper
side of the cutter housing, be careful to avoid getting water into controls
and cables or anywhere near the engine air cleaner or muffler opening.
To wash the underside of the cutter deck, attach a garden hose to the
fitting on the cutter deck (see below) and turn water on. Start engine,
engage blades, and allow it to run at normal operating speed for several
minutes. This should be done in an area where the water and debris can
run onto grass or a dirt surface. Do not flush the water or debris into the
storm water system.
1. After washing the lawn mower, remove garden hose and wipe dry all
accessible surfaces.
2. With the mower in an upright position, start the engine outdoors and let
it run until it reaches normal operating temperature to evaporate any
water remaining on the engine.
3. Stop the engine and allow it to cool.
4. After the lawn mower is clean and dry, coat areas that may rust with a
light film of oil or Silicon Spray. Also lubricate the control cable cores
with a silicon spray lubricant.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRU19M1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRU19M1 in the language / languages: English as an attachment in your email.

The manual is 5,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info