477991
41
Zoom out
Zoom in
Previous page
1/50
Next page
BLADE REMOVAL AND INSTALLATION
If you remove the blade, use a torque wrench for installation. Wear
heavy gloves to protect your hands. To avoid weakening the blade,
or causing imbalance or poor cutting, the blade should be sharpened
by trained staff at an authorized Honda servicing dealer. If replacing
the blade, use a genuine Honda replacement blade or equivalent.
1. Removal: Turn the fuel valve to OFF. Disconnect the spark plug
cap, then tilt the mower to the right side, carburetor side up.
2. Remove the two blade bolts with a 14 mm socket. Use a wooden
block to prevent the blade from turning when removing the bolts.
Remove the blade from the blade holder.
3. Installation: Clean around the blade holder. Install the blade using
the bolts and special washers exactly (concave side of the special
washers toward the blade) as shown.
The blade bolts and washers are specially designed; when
replacing them, use only genuine Honda parts. Tighten the bolts
with a torque wrench. Use a wooden block to stop the blade from
turning.
Blade bolt torque: 49 ~ 59 N
m
SPECIAL
WASHER (2)
BLADE
BLADE
BOLT (2)
BLADE HOLDER
7. MAINTENANCE
40
E
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRS536C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRS536C in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRS536C

Honda HRS536C User Manual - German - 50 pages

Honda HRS536C User Manual - Dutch - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info