477990
5
Zoom out
Zoom in
Previous page
1/56
Next page
ENGLISH 5
CUTTING HEIGHT ADJUSTMENT LEVERS
There are six adjustment settings. The cutting height figures are
approximate. The actual height of cut grass will vary with lawn and
soil conditions.
There is one adjustment lever [1] for each wheel.
PRE-OPERATION CHECKS
ARE YOU READY TO MOW?
Be sure to wear protective clothing. Long pants and eye protection
can lower your risk of injury from thrown objects. Wear footwear that
protects your feet and won’t let you slip if you mow on slopes or
uneven ground.
CHECK YOUR LAWN
For your safety and for the safety of others, always inspect the area
before mowing.
Objects
Anything that can be picked up by the blade and thrown is a potential
hazard to you and others. Look for things like stones, sticks, bones,
and wire. Remove them from the mowing area.
People and Pets
People and animals near the mowing area can move into your path or
into a position where they could be struck by thrown objects. Clear the
area of people, especially children, and pets. Their safety is your
responsibility.
Lawn
Check the length and condition of the grass, so that you will know
what cutting height and mowing speed to use.
Avoid mowing wet grass. Not only will wet grass clog your mower
deck and collect in clumps on the lawn, it also gives poor traction,
increasing your risk of losing your footing.
CHECK YOUR MOWER
Blade
1. Move the fuel valve to the
OFF position (page 4).
2. Disconnect the spark plug cap
from the spark plug (page 14).
3. Tilt the mower to the right so
the fuel cap is up [1]. This will
help prevent fuel leakage,
motor oil seeping into the air
filter, and hard starting.
4. Inspect the blade [2] for
damage, cracks, and
excessive wear, rust, or
corrosion.
A dull blade can be sharpened, but a blade that is worn out, bent,
cracked, or otherwise damaged must be replaced. A worn or
damaged blade can break, causing blade pieces to be thrown from
the mower.
When a blade needs sharpening or replacement, take the lawn
mower to an authorized Honda dealer. Or, if you have a torque
wrench, you can remove and install the blade yourself.
Check that the blade bolts [2] are tight (page 15).
25 mm
37 mm
50 mm
66 mm
75 mm
87 mm
[1]
B WARNING
A worn, cracked, or damaged blade can break, and pieces
of the damaged blade can become dangerous projectiles.
Thrown objects can cause serious injury.
Inspect the blades regularly, and do not operate the mower
with a worn or damaged blade.
[1]
[2]
NORMAL
EXCESSIVELY
WORN
BENT
CRACKED
00X39VG36410.book Page 5 Monday, November 16, 2009 1:01 PM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRS536 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRS536 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 7,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRS536

Honda HRS536 User Manual - German, Dutch, Italian - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info