474005
53
Zoom out
Zoom in
Previous page
1/63
Next page
7. MAINTENANCE
52
E
BLADE REMOVAL AND INSTALLATION
If you remove the blade(s) for sharpening or replacement, you will need a
torque wrench for installation. Wear heavy gloves to protect your hands.
BLADE SHARPENING: To avoid weakening the blade(s), or causing
imbalance or poor cutting, the blade(s) should be sharpened by trained staff
at an authorized Honda dealer.
BLADE REPLACEMENT: Use genuine Honda replacement blades or their
equivalent.
Blade Removal
1. Put the throttle lever in the STOP position and turn the fuel valve OFF.
Disconnect the spark plug cap, then tilt the mower to the right side, so the
carburetor side is up. This will help to prevent fuel leakage and hard
starting due to carburetor flooding.
2. Use a 14 mm socket wrench and remove the two blade bolts [1] and
special washers [2] from the blade control assembly [5]. Use a wooden
block to prevent the blade(s) from turning when removing the bolts.
3. Remove the HRM536C upper mulching blade [4] and lower mulching blade
[3] or the HRB536C high-lift blade [6].
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRM536C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRM536C in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRM536C

Honda HRM536C User Manual - German - 63 pages

Honda HRM536C User Manual - Dutch - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info