Manual Honda HRE330A2 (page 4 of 68) (English, German, Dutch, French, Italian, Portuguese, Spanish)

580807

Zoom out

Zoom in

1/68

3. FINISH ASSEMBLY

Unpacking and completing the assembly

should be done on a flat and stable surface, with enough space

for machine handling and its packaging, always making use

of suitable equipment.

Disposal of the packaging should be done in accordance with the

local regulations in force.

Fit the two sleeves (1) to the two lower parts of the handle (2) and

(3), positioning them so that the openings are facing towards the in-

side, then tighten the screws (short) (4), provided in the pack.

Insert the right (2)

and left (3) parts of

the handle into the

respective holes,

making sure the

positions have not

been inverted; now

fasten them in

place using the

screws (long) (5)

supplied in the

pack.

Tightening

torque: 3,0 Nm.

Apply the two caps

(6) to then ends of

the upper part of

the handle (7).

Attach the upper

part of the handle

(7) to the lower

parts using the

knobs (8) and the

nuts and bolts sup-

plied as shown.

Use the supplied clamp (9) to fasten the cable (10) in the indicated

position.

Insert the frame (1)

into the sack (2) and

attach all the plastic

profiles (3) with the

help of a screwdriver,

as shown in the

drawing.

WARNING!

4. DESCRIPTION OF CONTROLS

The motor is controlled by a

dual action switch to prevent

starting it accidentally.

To start, press the button (2)

and pull the lever (1).

The motor automatically

stops on releasing the lever

(1).

• HRE 330

The cutting height is adjusted by attaching the wheels to the required

hole, fully tightening the pin (1) using the wrench (2) provided.

All the wheels must be at the same height.

MAKE THIS ADJUSTMENT ONLY WHEN THE BLADE IS

STOPPED.

• HRE 370

The height is adjusted using the special lever (1).

MAKE THIS ADJUSTMENT ONLY WHEN THE BLADE IS

STOPPED.

4EN

Ø 130

Ø 160

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRE330A2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda HRE330A2 Manual

Product: