473996
43
Zoom out
Zoom in
Previous page
1/92
Next page
OPERATING HINTS AND TIPS
5. Wait for the engine to get up to speed before starting cutting.
6. To cut in self propulsion, push the drive clutch lever [1] against the handle and hold it there.
NOTE:
The drive clutch lever acts as a variable speed unit according to its position. It can vary
the speed between zero and the maximum speed preselected with the shift lever. The
maximum speed is reached when the shift lever is put on the maximum speed and the clutch
lever is held against the handle.
CAUTION:
Move the lever quickly from one end of its travel to the other, so that the clutch is
always either fully engaged or fully disengaged. This avoids stalling the engine and increases
the service life of the clutch mechanism.
7. To stop the mower moving, release the clutch lever [1].
8. To stop the blade rotating, release the blade clutch control lever [2].
NOTE:
If the grass is long, it is preferable to cut in stages, reducing the cutting height and/or forward
speed at each pass. You will thus avoid choking the discharge outlet.
It is possible not to use the travel when cutting in restricted spaces.
Also, the transmission may be used to move the mower without the blade being engaged
(paths, around flower beds, etc.).
[3] How to mow a small area [4] How to mow a largel area
GB
CONSEILS DUTILISATION
5. Attendre que le moteur ait repris son régime avant de commencer la tonte.
6. Pour tondre en propulsion automatique, pousser le levier dembrayage davancement [1]
contre le guidon et le maintenir.
NOTE :
Le levier dembrayage davancement agit comme un variateur de vitesse en
fonction de sa position. Il peut faire varier la vitesse entre zéro et la vitesse maximale
présélectionnée au levier de changement de vitesse.
La vitesse maximale est atteinte lorsque le levier de changement de vitesse est placé sur
la vitesse maximale et le levier dembrayage est maintenu contre le guidon.
PRÉCAUTION :
Exercer un mouvement rapide et complet sur le levier dembrayage davancement
pour quil soit toujours totalement engagé ou arrêté. Ceci permet de prolonger la durée de
service du mécanisme de transmission.
7. Pour arrêter lavancement de la tondeuse, relâcher le levier dembrayage davancement [1].
8. Pour stopper la rotation de la lame, relâcher le levier dembrayage de lame [2].
NOTE :
Si lherbe est haute, il est préférable de tondre par étapes en réduisant la hauteur de coupe
et/ou la vitesse davancement à chaque passage. Vous éviterez ainsi un engorgement du
tunnel déjection.
Il est possible de ne pas utiliser lavancement lors de la tonte dans des endroits de surface
restreinte.
De même, lembrayage davancement peut être utilisé pour le déplacement de la tondeuse,
sans engager lembrayage de lame (allées, massifs, etc...).
[3] Modèle de tonte dun petit terrain [4] Modèle de tonte dun grand terrain
F
43
43


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-hrd536

Reset search

  • Hi, can you tell me what the guarantee is on the Honda hrd536 lawnmowers.
    Thank you. Submitted on 15-9-2022 at 14:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRD536 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRD536 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRD536

Honda HRD536 User Manual - Dutch, Italian, Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info