13159
8
Zoom out
Zoom in
Previous page
1/55
Next page
ENGLISH
Oil Change OIL FILTER (applicable types)
Oil Filter Change
LOWER LIMIT
OIL DRAIN BOLT
UPPER LIMIT
WASHER
OIL FILLER CAP/DIPSTICK
OIL FILTER WRENCH
FILTER MOUNTING BASE
SEAL
OIL FILTER
8
Drain the used oil when the engine is warm. Warm oil drains
quickly and completely.
Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take used oil in a sealed
container to your local recycling center or service station for
reclamation. Do not throw it in the trash, pour it on the ground,
or down a drain.
Running the engine with a low oil level can cause engine
damage.
Install the oil filler cap/dipstick and tighten securely.
12 N·m (1.2 kgf·m , 9 lbf·ft)
With the engine in a level position, fill to the upper limit mark on
the dipstick with the recommended oil (see page ).
Drain the engine oil, and retighten the drain bolt securely.
Remove the oil filter with an oil filter wrench, and drain the
remaining oil into a suitable container. Dispose the used oil and
filter in a manner compatible with the environment.
Clean the filter mounting base, and coat the seal of the new oil
filter with clean engine oil.
Use an oil filter wrench, rather than a strap wrench, to avoid
striking and damaging the oil filter.
Use only a genuine Honda oil filter or a filter of equivalent
quality specified for your model. Using the wrong filter, or a
non-Honda filter which is not of equivalent quality, may cause
engine damage.
Screw on the new oil filter by hand until the seal contacts the
filter mounting base, then use an oil filter wrench to tighten the
filter an additional 7/8 turn.
Oil filter tightening torque:
Refill the crankcase with the specified amount of the
recommended oil (see page ). Reinstall the oil filler cap/
dipstick.
Start the engine, and check for leaks.
Stop the engine, and check the oil level as described on page .
If necessary, add oil to bring the oil level to the upper limit mark
on the dipstick.
Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick, drain bolt and washer.
Allow the used oil to drain completely, then reinstall the drain
bolt and new washer, and tighten the drain bolt securely.
1.
2.
3.
4.
3.
4.
1.
2.
5.
6.
7.
7
7
7
05/03/24 18:27:49 32Z5Z600_008
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Honda Engines GXV520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Honda Engines GXV520 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Honda Engines GXV520

Honda Honda Engines GXV520 User Manual - German - 58 pages

Honda Honda Engines GXV520 User Manual - Dutch - 19 pages

Honda Honda Engines GXV520 User Manual - French - 58 pages

Honda Honda Engines GXV520 User Manual - Italian - 58 pages

Honda Honda Engines GXV520 User Manual - Spanish - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info