13137
31
Zoom out
Zoom in
Previous page
1/33
Next page
3. Engine Oil
Change the engine oil (see page 19).
4. Engine Cylinders
Remove the spark plugs (see pages 23, 24). Pour a tablespoon (5
-10 cc) of clean engine oil into each cylinder. Crank the engine for
a few revolutions to distribute the oil in the cylinders. Reinstall the
spark plugs.
PLACING IN STORAGE
If stored with gasoline in the fuel tank and carburetor, it is important
to reduce the hazard of gasoline vapor ignition.
Select a well-ventilated storage area away from any appliance that
operates with a flame, such as a furnace or water heater.
Also avoid any area with a spark-producing electric motor, or where
power tools are operated.
If possible, avoid storage areas with high humidity, because that
promotes rust and corrosion.
Unless all fuel has been drained from the fuel tank, turn off the fuel
supply valve, following the manufacturer’s instructions.
With the engine and exhaust system cool, cover to keep out dust.
A hot engine and exhaust system can ignite or melt some materi-
als. Do not use sheel plastic as a dust cover. A nonporous cover
will trap moisture around the mower, promoting rust and corrosion.
REMOVAL FROM STORAGE
Check the engine as described in the PRE-OPERATION CHECKS
section of this manual.
If the fuel was drained during storage preparation, fill the fuel tank
with fresh gasoline. If you keep a container of gasoline for
refueling, be sure that it contains only fresh gasoline. Gasoline
oxidizes and deteriorates over time, causing hard starting.
If the cylinders were coated with oil during storage preparation, the
engine will smoke briefly at startup. This is normal.
30
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Honda Engines GX640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Honda Engines GX640 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Honda Engines GX640

Honda Honda Engines GX640 User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info