13127
30
Zoom out
Zoom in
Previous page
1/69
Next page
SERVICING YOUR HONDA ENGINE
OIL FILTER CHANGE
1.
Drain the engine oil, and retighten the drain plug securely (see page
26).
2.
Remove the oil filter, and drain the oil into
a
suitable container.
Discard the used oil filter.
3.Clean the filter mounting base, and coat the gasket of the new oil
filter with clean engine oil.
m
Use only a genuine Honda oil filter or a filter of equivalent quality
specified for your model. Using the wrong filter, or a non-Honda
filter which is not
of
equivalent quality, may cause engine damage.
4.
Screw on the new oil filter by hand, until the gasket contacts the
filter mounting base, then use an oil filter wrench to tighten the filter
an additional 7/8 turn.
OIL FILTER TIGHTENING TORQUE:
13
Ibfmft (1 7 N.m
,
1.75 kgf-m)
5.
Refill the crankcase
with
the
specified amount of the recommended
oil (see page 26
&
28). Reinstall the oil filter cap/dipstick.
6. Start the engine and check for oil filter leaks.
7.
Stop the engine, and check the oil level as described on page
25.
If
necessary, add oil to the upper
limit
mark on the dipstick.
GASKE
OIL FILTER
27
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Honda Engines GX360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Honda Engines GX360 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Honda Engines GX360

Honda Honda Engines GX360 User Manual - German - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info