13123
11
Zoom out
Zoom in
Previous page
1/60
Next page
−−
ENGLISH
COOLING FINS
Inspection
SPARK PLUG
Recommended Spark Plug:
SEALING
WASHER
SIDE ELECTRODE
COOLING FINS
SPARK PLUG CAP
SPARK PLUG
0.60 0.70 mm
(0.024 0.028 in)
SPARK PLUG CAP
5mmHEXBOLTTOP COVER
11
Inspect the spark plug.
Replace it if damaged or
badly fouled, if the sealing
washer is in poor condition,
or if the electrode is worn.
Measure the spark plug
electrode gap with a wire-
type feeler gauge. Correct the
gap, if necessary, by carefully
bending the side electrode.
The gap should be:
0.60 0.70 mm (0.024 0.028 in)
Install the spark plug carefully,
by hand, to avoid cross-
threading.
After the spark plug is seated, tighten with a 5/8-inch spark plug
wrench to compress the sealing washer.
When installing a new spark plug, tighten 1/2 turn after the spark
plug seats to compress the washer.
When reinstalling the original spark plug, tighten 1/8 1/4 turn
after the spark plug seats to compress the washer.
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
Attach the spark plug cap to the spark plug.
Reconnect the spark plug cap.
Install the top cover, and tighten the 5 mm hex bolt securely.
The recommended spark plug is the correct heat range for normal
engine operating temperatures.
An incorrect spark plug can cause engine damage.
For good performance, the spark plug must be properly gapped
and free of deposits.
Remove the top cover.
Loosen the 5 mm hex bolt with a hexagon wrench, then remove
the top cover.
You may be injured from the rotating parts or burned
by the muffler.
Do not pull the recoil starter handle when the top
cover is removed.
Do not operate the engine when the top cover is
removed.
Disconnect the spark plug cap, and remove any dirt from around
the spark plug area.
Remove the spark plug with a 5/8-inch spark plug wrench.
CM5H (NGK) CMR5H (NGK)
Disconnect the spark plug cap.
Inspect the engine cooling fins, and clean out debris if necessary.
Install the top cover, and tighten the 5 mm hex bolt securely
with a hexagon wrench.
Loosen the 5 mm hex bolt, then remove the top cover.
2.
4.
3.
5.
6.
7.
8.
9.
2.
3.
1.
4.
5.
10.
11.
1.
,
05/12/16 15:01:11 32Z6J600_011
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Honda Engines GX35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Honda Engines GX35 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Honda Engines GX35

Honda Honda Engines GX35 User Manual - English - 60 pages

Honda Honda Engines GX35 User Manual - German, Dutch, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info