13079
4
Zoom out
Zoom in
Previous page
1/32
Next page
4
E
Starting A Warm Engine
1. Move the flywheel brake lever to the RUN position.
2. Pull the starter grip lightly until resistance is felt, then pull briskly
(see page 3).
Stopping The Engine
1. Release the flywheel brake lever to stop the engine.
2. Turn the fuel valve to the OFF position (see page 2).
TYPE 4 (AUTOMATIC CHOKE RETURN/FIXED THROTTLE)
Starting A Cold Engine
1. Turn the fuel valve to the ON
position (see page 2).
2. Move the choke lever to the
choke position ().
3. Move the flywheel brake
lever to the RUN position.
4. Pull the starter grip lightly
until resistance is felt, then
pull briskly (see page 3).
Begin pulling the recoil starter as soon as you move the flywheel
brake lever to the RUN position. The choke lever automatically
begins moving to the OFF position when the flywheel brake lever is
moved to the RUN position.
5. If the engine does not start within several consecutive pulls of the
recoil starter, release the flywheel brake lever and move the choke
lever to the ON position.
6. Move the flywheel brake lever to the RUN position and
immediately begin operating the recoil starter.
7. The throttle is preset on this type.
Starting A Warm Engine
1. Move the flywheel brake lever to the brake OFF position.
2. Pull the starter grip lightly until resistance is felt, then pull briskly
(see page 3).
Stopping The Engine
1. Release the flywheel brake lever to activate the flywheel brake and
stop the engine.
2. Turn the fuel valve to the OFF position (see page 2).
TYPE 5 (MANUAL CHOKE/FIXED THROTTLE)
Starting A Cold Engine
1. Turn the fuel valve to the ON
position (see page 2).
2. Pull the choke rod to the ON
position.
3. Turn the engine stop switch
to the ON position.
4. Pull the starter grip lightly
until resistance is felt, then
pull briskly (see page 3).
5. If the choke was used to start the engine, move the choke rod to
the OFF position as soon as the engine warms up enough to run
smoothly without use of the choke.
6. The engine speed is preset on this type.
Starting A Warm Engine
1. Turn the engine stop switch to the ON position.
2. Pull the starter grip lightly until resistance is felt, then pull briskly
(see page 3).
Stopping The Engine
1. Move the engine switch to the OFF position.
2. Turn the fuel valve to the OFF position (see page 2).
TYPE 6 (REMOTE THROTTLE/BLADE BRAKE CLUTCH)
Starting A Cold Engine
1. Turn the fuel valve to the ON position (see page 2).
2. Move the choke/
throttle/stop lever to
the CHOKE position.
Make sure the blade
brake clutch control
lever is disengaged
(see equipment
manual).
3. Pull the starter grip
lightly until
resistance is felt,
then pull briskly (see
page 3).
4. As soon as the
engine starts, slowly
move the choke/
throttle/stop lever to
the FAST position.
5. Allow the engine to warm to operating temperature, then engage
the blade brake clutch control lever (see equipment manual).
Starting A Warm Engine
1. Place the choke/throttle/stop lever in the FAST position.
Make sure the blade brake clutch control lever is disengaged (see
equipment manual).
2. Pull the starter grip lightly until resistance is felt, then pull briskly
(see page 3).
Throttle Setting
Position the choke/throttle/stop lever for the desired engine speed.
For best engine performance, it is recommended the engine be
operated with the choke/throttle/stop lever in the FAST (or high)
position.
Stopping The Engine
1. Disengage the blade brake clutch control lever (see equipment
manual).
2. Move the choke/throttle/stop lever to the SLOW position and allow
the engine to idle for a few seconds.
3. Move the choke/throttle/stop lever to the STOP position.
4. Turn the fuel valve OFF (see page 2).
CHOKE
LEVER
OFF
ON
RUN
FLYWHEEL
BRAKE LEVER
STOP
ENGINE STOP SWITCH
CHOKE
ROD
ON
ON
OFF
FUEL
VALVE
SLOW
CHOKE
CHOKE/
THROTTLE/
STOP
LEVER
FAST
STOP
FUEL VALVE
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Honda Engines GSV190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Honda Engines GSV190 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Honda Engines GSV190

Honda Honda Engines GSV190 User Manual - English - 16 pages

Honda Honda Engines GSV190 User Manual - German, Dutch, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info