13061
3
Zoom out
Zoom in
Previous page
1/48
Next page
3
E
2. See equipment manual and
position the throttle control
so the choke/throttle lever
moves to the CHOKE
position.
3. See equipment manual
and position the flywheel
brake control so the
flywheel brake lever is in
the RUN position.
4. Pull the starter grip lightly until
resistance is felt, then pull briskly.
NOTICE
Do not allow the starter grip to snap
back against the engine. Return it
gently to prevent damage to the
starter.
5. If the choke was used to start the
engine, move the choke/throttle
lever to the FAST (or high) position
as soon as the engine warms up
enough to run smoothly without
use of the choke.
Throttle Setting
Position the throttle control for the desired engine speed. For best
engine performance, it is recommended the engine be operated with
the throttle in the FAST (or high) position.
Starting A Warm Engine
1. Place the choke/throttle lever in the FAST position.
2. Move the flywheel brake lever to the RUN position.
3. Pull the starter grip lightly until resistance is felt, then pull briskly.
Stopping The Engine
1. Move the choke/throttle control to
the SLOW position.
2. Release the flywheel
brake lever to stop the
engine.
3. Turn the fuel valve to
the OFF position (see
TYPE 1 Step 1 on
page 2).
TYPE 2 (MANUAL CHOKE/MANUAL THROTTLE)
Starting A Cold Engine
1. Turn the fuel valve to the ON position (see TYPE 1 Step 1 on
page 2).
2. Move the choke lever to the ON position.
3. Move the throttle lever to the FAST position.
4. Pull the starter grip lightly until resistance is felt, then pull briskly
(see TYPE 1 Step 4 on page 3).
5. If the choke was used to start the engine, move the choke lever to
the OFF position as soon as the engine warms up enough to run
smoothly without use of the choke.
6. Position the throttle lever for the desired engine speed. For best
engine performance, it is recommended the engine be operated
with the throttle in the FAST (or high) position.
Starting A Warm Engine
1. Move the throttle lever to the FAST position.
2. Pull the starter grip lightly until resistance is felt, then pull briskly
(see TYPE 1 Step 4 on page 3).
Stopping The Engine
1. Move the throttle lever to the SLOW position.
2. Move the throttle lever to the STOP position.
3. Turn the fuel valve to the OFF position (see TYPE 1 Step 1 on
page 2).
TYPE 3 (FLYWHEEL BRAKE/REMOTE CHOKE/FIXED
THROTTLE)
Starting A Cold Engine
1. Turn the fuel valve to the
ON position (see TYPE 1
Step 1 on page 2).
2. Move the choke control
cable (see equipment
manual) so that the
choke arm moves to the
choke ON position.
3. Move the flywheel brake lever
to the RUN position.
4. Pull the starter grip lightly until
resistance is felt, then pull
briskly (see TYPE 1 Step 4 on
page 3).
5. If the choke was used to start
the engine, move the choke
control cable so that the choke
arm moves to the OFF position
as soon as the engine warms
up enough to run smoothly without use of the choke.
The engine speed is preset on this type.
SLOW
CHOKE
CHOKE/
THROTTLE
LEVER
FAST
FLYWHEEL
BRAKE LEVER
STARTER
GRIP
CHOKE
FAST
CHOKE/
THROTTLE
LEVER
SLOW
THROTTLE
LEVER
FAST
FLYWHEEL
BRAKE LEVER
STOP
SLOW
FAST
ON
CHOKE LEVER
THROTTLE
LEVER
OFF
ON
FUEL
VALVE
CHOKE
ARM
CHOKE CONTROL
CABLE
ON
OFF
FUEL VALVE ON
FLYWHEEL BRAKE LEVER
RUN
STOP
3


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-honda-engines-gcv160

Reset search

  • My Honda EB 3000 Generator Jammed (stucked) Engine Switch Submitted on 1-3-2022 at 11:20

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Honda Engines GCV160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Honda Engines GCV160 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Honda Engines GCV160

Honda Honda Engines GCV160 User Manual - English, German, Dutch - 56 pages

Honda Honda Engines GCV160 User Manual - Dutch - 16 pages

Honda Honda Engines GCV160 User Manual - French, Italian, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info