13057
3
Zoom out
Zoom in
Previous page
1/44
Next page
3
ENGLISH
TYPE 1: MANUAL THROTTLE / MANUAL CHOKE
Starting A Cold Engine
1. Pull the choke rod to the
CLOSED position.
2. Move the throttle lever (gray)
away from the SLOW
position, about 1/3 of the way
toward the FAST position.
Some engine applications
use a remotely-mounted
throttle control rather than
the engine-mounted throttle
lever shown here.
3. Pull the starter grip lightly until
resistance is felt, then pull
briskly.
NOTICE
Do not allow the starter grip to
snap back against the engine.
Return it gently to prevent
damage to the starter.
4. If the choke rod was pulled to the CLOSED position to start the
engine, push it to the OPEN position as soon as the engine warms
up enough to run smoothly.
Throttle Setting
Position the throttle control
lever (gray) for the desired
engine speed. For best engine
performance, it is
recommended the engine be
operated with the throttle in the
FAST (or high) position.
Starting a Warm Engine
If the engine has run out of fuel, pull the choke rod to the CLOSED
position after refueling. If the engine has not run out of fuel, leave the
choke rod in the OPEN position.
1. Place the throttle lever in the FAST position.
2. Pull the starter grip lightly until you feel resistance, then pull briskly.
3. If the choke rod was pulled to the CLOSED position to start the
engine, push it to the OPEN position as soon as the engine starts.
Stopping The Engine
1. Move the throttle lever (gray)
to the SLOW position.
2. Allow the engine to idle for a
few seconds, then move the
throttle lever to the STOP
position.
TYPE 2: FIXED THROTTLE / IGNITION SWITCH LEVER /
MANUAL CHOKE
Starting A Cold Engine
1. Pull the choke rod to the
CLOSED position.
2. Move the ignition switch lever
(red) to the ON position.
Some engine applications use
a remote-mounted ignition
switch rather than the engine-
mounted ignition switch lever
shown here.
3. Pull the starter grip lightly until
resistance is felt, then pull
briskly.
NOTICE
Do not allow the starter grip to
snap back against the engine.
Return it gently to prevent
damage to the starter.
4. If the choke rod was pulled to the CLOSED position to start the
engine, push it to the OPEN position as soon as the engine warms
up enough to run smoothly.
5. The engine speed is preset on this type.
Starting a Warm Engine
If the engine has run out of fuel, pull the choke rod to the CLOSED
position after refueling. If the engine has not run out of fuel, leave the
choke rod in the OPEN position.
1. Pull the starter grip lightly until you feel resistance, then pull briskly.
2. If the choke was pulled to the CLOSED position to start, push it to
the OPEN position as soon as the engine starts.
CHOKE ROD
CLOSED
OPEN
SLOW
FAST
THROTTLE
LEVER (gray)
STARTER GRIP
FAST
SLOW
THROTTLE
LEVER (gray)
STOP
FAST
THROTTLE
LEVER (gray)
CHOKE ROD
CLOSED
OPEN
IGNITION SWITCH
LEVER (red)
ON
STARTER GRIP
POM53483-F.book Page 3 Thursday, August 24, 2006 1:34 PM
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Honda Engines GC190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Honda Engines GC190 in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Honda Engines GC190

Honda Honda Engines GC190 User Manual - German, Dutch, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info