Manual Honda HF2622 (page 17 of 160) (English, German, Dutch, French, Italian, Spanish)

580725

Zoom out

Zoom in

1/160

17 EN

Damaged or bent bladesmust alwaysbe re-

placed; never try to repair them! ALWAYS USE MANUFAC-

TURER'S GENUINE BLADES!

Onlythe followingpairsof bladescanbeusedonthismachine:

The blades (2) and fans (3) differ and are

contra-rotating.Wheninstallingthem,makesurethattheyare

correctly positioned.

Reassemble each blade (2a –

2b)ontotherespectivefan(3a

–3b),followingthe “RH”(right)

and “LH” (left) indications

printed on the fan and inside

the cutting plate, then tighten

the four screws (5) with the

washersusingadynamometric

keywhichiscalibratedat9.5Nm.

The “right”and “left” indications refer to the driv-

ing position.

If one or both

shaft hubs (7) come off when

dismantling the blades, make

sure the keys (8) are securely

lodged in place. When re-fit-

ting the blades, always follow

the indicated sequence, mak-

ingsurethattheblades'wings

arefacingtowardsthe interior

of the cutting deck and that

the cupped side of the cup

washer(6) is pressingagainst

the blade. Tighten the fixing

screws (1a – 1b) using a

torque wrench set to 45-50

Nm.

1a = screwwithrightthread(tightenclockwise)

1b = screwwithleftthread(tightenanticlockwise)

WARNING!

NOTE

HF2622

◊

••HF2417

◊

••HF2315HM•

WARNING!

Removethetwonuts(6a)fromthetwofrontconnectingrodpins

(7), withoutloosening or changingtheposition of thenuts(8)

andlocknuts(9).

Remove the two cotter pins (10) of the

rear pins.

After checking that there are no obstruc-

tions,remove thedeck insuch awaythat

ll the pins come out of their housings.

When assembling, ensure that the two rear holes of the corner

joints are usedforfixing thepins (7).Performthe operations de-

scribedaboveinreversewhilemakingsurethatthefrontterminal

of the collector channel properly fits onto the exit of the cutting

deck.

b) Dismantling, sharpeningandbalancingblades

All operations on the blades (dismantling,

sharpening,balancing,remountingand/orreplacing)require

acertain familiarityandspecialtools.Forsafetyreasons,go

toaspecializedcentreifyoudonothavetherighttoolsorex-

perience.

Wear heavy gloves when handling the bla-

des.

To remove a blade, hold it firmly

andundothecentralbolt(1a -1b)

(use15mmwrench)inthedirec-

tion indicated by the arrow for

each blade, noting that one of

thefixingboltshasaright-hand

thread and the other one has a

left-handthread.

1a = screwwithrightthread(loosenanti-clockwise)

1b = screwwithleftthread(loosenclockwise)

The blade (2) is attached to the

fan (3) by a bracket (4) and four

screwswith washers(5).

Use a 10 mm key to loosen the

fourscrews(5)andfreetheblade

(2)fromitsbracket(4).

Sharpen the two cutting edges us-

ingamediumgradegrindingwheel

and check the balance by holding

theblade upwithascrewdriverin-

sertedinthecentralhole.

HF26••

◊

••

WARNING!

HF2622

◊

••HF2417

◊

••HF2315HM•

HF2315SB•

HF2622

◊

••

HF2315HM•

HF2417

◊

••

9 87

8 6

8 7 8 9

HF2315 SB: 2b 80520-VK1-0030 – 80519-VK1-0030 2a

HF2315 HM: 2b 80395-Y09-0030 – 80394-Y09-0030 2a

HF2417: 2b 72511-VK1-A111-M1 – 72531-VK1-A111-M1 2a

HF2622: 2b 72511-VK1-A111-M1 – 72531-VK1-A111-M1 2a

I hit a log with my cutting blade and one side is not engaging while the other side is still working do you have a sugestion regarding which part needs replacing,,is there a sheer bolt or similar that needs replacing on my honda HF2622 Sit on mower Submitted on 12-8-2023 at 10:53
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda HF2622 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda HF2622 Manual

Product: