spond to:
«SLOW» for minimum engine speed
«FAST» for maximum engine speed
– When moving from one area to another, put the lever in a position between
«SLOW» and «FAST».
– When cutting, go to the «FAST» position.
4.4 K
EY IGNITION SWITCH
This key operated control has three positions:
«OFF» everything is switched off;
«ON» activates all parts;
«START» engages the starter motor.
On being released at the «START» position, the key will automatically return to
«ON».
4.5 P
ARKING BRAKE LEVER
This lever is to stop the machine from moving when it has been parked. There are
two positions:
«A» = Brake off
«B» = Brake engaged
– The brake is engaged by fully pressing the pedal (4.21 or 4.31) and moving the
lever to position «B». When you take your foot off the pedal it will be blocked in
the down position.
– In models which include it, a pilot lamp will warn that the “brake is engaged”
(4.10.d).
– To disengage the parking brake, press the pedal (4.21 or 4.31). The lever will
return to position «A».
4.6 C
UTTING HEIGHT ADJUSTING LEVER
There are seven positions for this lever, shown as "1" to "7" on the label, which
EN 16 CONTROLS AND INSTRUMENTS
