478003
43
Zoom out
Zoom in
Previous page
1/51
Next page
EN 43MAINTENANCE
6.3.3 ADJUSTMENT TO THE ENGAGEMENT AND BRAKE OF THE BLADES
When the lever is operated to disengage
the blades, this also activates the blade
brake for stopping the blades within a few
seconds.
A stretched cable and changes in the
length of the belt can impair the blades’
engagement or rotation.
To compensate this, turn the adjusting nut
(1) till the correct spring length (2) is
reached (measured from the outer coils of the spring with the blades engaged).
6.3.4 B
RAKE ADJUSTMENT
If the brakes should seem to be weak, immediately seek advice from your Dealer.
6.3.5 A
DJUSTING THE TENSION OF THE DRIVE BELT
If you should notice that forward drive
power has dropped, it will be necessary to
adjust the tension of the spring of the
stretcher to return to former conditions.
Access for making this adjustment is by
opening the engine hood; the adjuster is
located at the right side of the engine.
Turn properly the nuts (2) as much as
necessary for a length “A” of the spring
(1) of:
A = 119 - 121 mm ( For mechanical drive models)
A = 120 - 122 mm ( For hydrostatic drive models)
measured to the outside of the coil of the spring. When the adjustment has been
made, tighten the nuts (2).
1
A
2
1 2
97 ÷ 99 mm
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HF2114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HF2114 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HF2114

Honda HF2114 User Manual - German - 51 pages

Honda HF2114 User Manual - Dutch - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info