EN 21HOW TO USE THE MACHINE
5.3 DIRECTIONS BEFORE STARTING THE WORK
Before starting to work it is necessary to carry out several of checks and opera-
tions to ensure that the work gives the best results and is done in maximum
safety.
5.3.1 S
EAT ADJUSTMENT
To change the position of the seat, loose
the four fixing screws (1) and slide it along
the slots of the bracket.
When a comfortable position is reached,
fully tighten the four screws (1).
5.3.2 T
YRE PRESSURE
Having the correct tyre pressure is the main condition for ensuring that the cutting
deck is horizontal and thus mows evenly.
Unscrew the valve caps and connect a
compressed air line with a gauge to the
valves.
The pressures are:
FRONT 1.5 bar
REAR 1.2 bar
5.3.3 F
ILLING WITH OIL AND FUEL
The type of oil and fuel to use is given in the engine manual.
With the engine stopped, check its oil level. Exactly following the methods descri-
NOTE