529876
3
Zoom out
Zoom in
Previous page
1/296
Next page
2009
Honda GL1800
GOLDWING
OWNER’S MANUAL
08/07/15 09:51:31 31MCA680 0002 
Introduction
Introduction
When you own a Honda, you’re part of a worldwide family of satisfied
customers people who appreciate Honda’s reputation for building quality into
every product.
Congratulations on choosing a GL1800 GOLDWING motorcycle.
As you read this manual, you will find information that is preceded by a
symbol. This information is intended to help you avoid damage to your
Honda, other property, or the environment.
We also recommend that you read this owner’s manual before you ride. It’s full
of facts, instructions, safety information, and helpful tips. To make it easy to use,
the manual contains a detailed list of topics at the beginning of each section, and
both an in-depth table of contents and an index at the back of the book.
Before riding, take time to get acquainted with your motorcycle and how it
works. To protect your investment, we urge you to take responsibility for
keeping your motorcycle well maintained. Scheduled service is a must, of
course. But it’s just as important to observe the break-in guidelines, and perform
all pre-ride and other periodic checks detailed in this manual.
Your GOLDWING has earned its reputation as the ultimate luxury touring
motorcycle. It comes loaded with power, unequaled cargo space, a sophisticated
audio system, adjustable windscreen, suspension, and ventilation, and other
unique features to provide maximum convenience and comfort. Additionally,
there are special packages available: Anti-Lock Brake System (ABS), Tire
Pressure Monitoring System (TPMS), Premium Audio, Navigation System,
Airbag, and Comfort.
08/07/15 09:51:38 31MCA680 0003 
Introduction
Introduction
WARNING:
Read the Warranties Booklet (page ) thoroughly so you understand the
coverages that protect your new Honda and are aware of your rights and
responsibilities.
If you have any questions, or if you ever need special service or repairs,
remember that your Honda dealer knows your motorcycle best and is dedicated
to your complete satisfaction.
Please report any change of address or ownership to your Honda dealer so we
will be able to contact you concerning important product information.
This product contains or emits chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm.
California Proposition 65 Warning
You may also want to visit our website at www.honda.com.
Happy riding!
261
08/07/15 09:51:44 31MCA680 0004 
You WILL be KILLED or SERIOUSLY HURT
if you don’t follow instructions.
You CAN be KILLED or SERIOUSLY HURT
if you don’t follow instructions.
You CAN be HURT if you don’t follow
instructions.
Safety Messages
Safety Labels
Safety Messages
DANGER, WARNING, CAUTION
Safety Headings
Safety Section
Instructions
A Few Words About Safety
Your safety, and the safety of others, is very important. And operating this
motorcycle safely is an important responsibility.
To help you make informed decisions about safety, we have provided operating
procedures and other information on labels and in this manual. This information
alerts you to potential hazards that could hurt you or others.
Of course, it is not practical or possible to warn you about all hazards associated
with operating or maintaining a motorcycle. You must use your own good
judgment.
You will find important safety information in a variety of forms, including:
–– on the motorcycle.
–– preceded by a safety alert symbol and one of three
signal words: or .
These signal words mean:
–– such as Important Safety Reminders or Important Safety
Precautions.
–– such as Motorcycle Safety.
–– how to use this motorcycle correctly and safely.
This entire manual is filled with important safety information –– please read it
carefully.
08/07/15 09:51:52 31MCA680 0005 
Contents
............................................................................................Motorcycle Safety .
..................................................................................Instruments & Controls .
....................................................................................Servicing Your Honda .
..................................................................................................Audio Systems .
..............................................................................Basic Operation & Riding .
...................................................................................................Before Riding .
1
11
71
43
97
137
Contents
These pages give an overview of the contents of your owner’s manual. The first
page of each section lists the topics covered in that section.
Important safety information you should know, plus a look at the safety-
related labels on your motorcycle.
The location and function of gauges, indicators, controls, and the Multi
Information Display on your motorcycle and operating instructions for
various controls and features.
Why your motorcycle needs regular maintenance, what you need to know
before servicing your Honda, an owner maintenance schedule, and
instructions for specific maintenance and adjustment items.
The location, function, and operation of the audio components on your
motorcycle.
How to start and stop the engine, shift gears, and brake. Also, riding
precautions and important information about riding with a passenger or cargo.
The importance of wearing a helmet and other protective gear, how to make
sure you and your motorcycle are ready to ride, and important information
about loading.
08/07/15 09:52:02 31MCA680 0006 
....................................................................................................................Tips .
.....................................................................Taking Care of the Unexpected .
....................................................................................Technical Information .
...................................................................................Consumer Information .
............................................................................................Table of Contents .
..................................................................................................................Index .
Quick Reference
..................................................................‘‘Reporting Safety Defects’’ .
207
213
239
257
266
268
276
Contents
Contents
How to store and transport your motorcycle and how to be an environmentally
responsible rider.
What to do if you have a flat tire, your engine won’t start, etc.
ID numbers, technical specifications, and other technical facts.
Sequential listing of topics in this owner’s manual.
Handy facts about fuel, engine oil, tire sizes, and air pressures.
Information on warranties, emission controls, how to get Honda service
manuals, and...
08/07/15 09:52:13 31MCA680 0007 
1
Motorcycle Safety
Motorcycle Safety
This section presents some of the most important information and
recommendations to help you ride your motorcycle safely. Please take a few
moments to read these pages. This section also includes information about the
location of safety labels on your motorcycle.
..............................................................................Important Safety Information .
...............................................................................Accessories & Modifications .
........................................................................................................Safety Labels .
2
4
6
08/07/15 09:52:18 31MCA680 0008 
2
Take Time to Learn & Practice
Ride Defensively
Always Wear a Helmet
Motorcycle Safety
Important Safety Information
You and Your Motorcycle Riding Tips,
Your motorcycle can provide many years of service and pleasure if you take
responsibility for your own safety and understand the challenges you can meet
while riding.
There is much that you can do to protect yourself when you ride. You’ll find
many helpful recommendations throughout this manual. The following are a
few that we consider to be most important.
Even if you have ridden other motorcycles, take time to become familiar with
how this motorcycle works and handles. Practice in a safe area until you build
your skills and get accustomed to the motorcycle’s size and weight.
Because many accidents involve inexperienced or untrained riders, we urge all
riders to take a certified course approved by the Motorcycle Safety Foundation
(MSF). See page .
The most frequent motorcycle collision happens when a car turns left in front of
a motorcycle. Another common situation is a car moving suddenly into your
lane.
Always pay attention to other vehicles around you, and do not assume that other
drivers see you. Be prepared to stop quickly or make an evasive maneuver. For
other riding tips, see the booklet, which
came with your new motorcycle (USA only).
It’s a proven fact: helmets significantly reduce the number and severity of head
injuries. So always wear an approved motorcycle helmet and make sure your
passenger does the same. We also recommend that you wear eye protection,
sturdy boots, gloves, and other protective gear (page ).
46
44
08/07/15 09:52:25 31MCA680 0009 
3
Motorcycle Safety
Make Yourself Easy to See
Ride within Your Limits
Don’t Drink and Ride
Keep Your Honda in Safe Condition
Important Safety Information
Some drivers do not see motorcycles because they are not looking for them. To
make yourself more visible, wear bright reflective clothing, position yourself so
other drivers can see you, signal before turning or changing lanes, and use your
horn when it will help others notice you.
Pushing limits is another major cause of motorcycle accidents. Never ride
beyond your personal abilities or faster than conditions warrant. Remember that
alcohol, drugs, fatigue, and inattention can significantly reduce your ability to
make good judgments and ride safely.
Alcohol and riding don’t mix. Even one drink can reduce your ability to respond
to changing conditions, and your reaction time gets worse with every additional
drink. So don’t drink and ride, and don’t let your friends drink and ride either.
It’s important to keep your motorcycle properly maintained and in safe riding
condition. To help avoid problems, inspect your motorcycle before every ride
and perform all recommended maintenance. Never exceed load limits (page ),
and do not modify your motorcycle (page ) or install accessories that would
make your motorcycle unsafe (page ).
50
5
4
08/07/15 09:52:31 31MCA680 0010 
Improper accessories or
modifications can cause a crash
in which you can be seriously
hurt or killed.
Follow all instructions in this
owner’s manual regarding
accessories and modifications.
4
Accessories
Motorcycle Safety
Accessories & Modifications
Load Limits,
Modifying your motorcycle or using non-Honda accessories can make your
motorcycle unsafe. Before you consider making any modifications or adding an
accessory, be sure to read the following information.
Carefully consider the weight of any accessories and any cargo stored in
those accessories to avoid exceeding the maximum weight limits.
For more information, see page .
Do not pull a trailer or sidecar with your motorcycle. This motorcycle was not
designed for these attachments, and their use can seriously impair your
motorcycle’s handling.
Do not add any electrical equipment that will exceed the motorcycle’s
electrical system capacity (page ). A blown fuse can cause a loss of lights
or engine power (page ).
Make sure the accessory does not obscure any lights, reduce ground clearance
and lean angle, limit suspension travel or steering travel, alter your riding
position, or interfere with operating any controls.
We strongly recommend that you use only Honda Genuine Accessories that
have been specifically designed and tested for your motorcycle. Because Honda
cannot test all other accessories, you must be personally responsible for proper
selection, installation, and use of non-Honda accessories.
Check with your Honda dealer for assistance and always follow these
guidelines:
Modifying the tire pressure monitoring system (TPMS) or any other part of
your motorcycle’s safety systems could make the systems ineffective
(page ).
50
245
232
85
08/07/15 09:52:40 31MCA680 0011 
5
Modifications
Motorcycle Safety
Accessories & Modifications
We strongly advise you not to remove any original equipment or modify your
motorcycle in any way that would change its design or operation. Such changes
could seriously impair your motorcycle’s handling, stability, and braking,
making it unsafe to ride.
Removing or modifying your lights, exhaust system, emission control system, or
other equipment can also make your motorcycle illegal.
08/07/15 09:52:44 31MCA680 0012 
(Models not equipped with Airbag)
6
Safety Labels
Motorcycle Safety
Safety labels on your motorcycle either warn you of potential hazards that could
cause serious injury or they provide important safety information. Read these
labels carefully and don’t remove them.
If a label comes off or becomes hard to read, contact your Honda dealer for a
replacement.
08/07/15 09:52:58 31MCA680 0013 
7
Safety Labels
Motorcycle Safety
08/07/15 09:53:04 31MCA680 0014 
8
Motorcycle Safety
Safety Labels
08/07/15 09:53:09 31MCA680 0015 
〈〉
〈〉
For USA
For Canada
9
Motorcycle Safety
Safety Labels
08/07/15 09:53:22 31MCA680 0016 
10
Motorcycle Safety
08/07/15 09:53:24 31MCA680 0017 
11
Instruments & Controls
Instruments & Controls
This section shows the location of all gauges, indicators, and controls you would
normally use before or while riding your motorcycle.
The items listed on this page are described in this section. Instructions for other
components are presented in other sections of this manual where they will be
most useful.
.........................................................................Operation Component Locations .
.............................................................................................Gauges & Indicators .
...................................................................................Multi Information Display .
.............................................................................Opening/Ending Ceremony .
................................................................On/Off-Opening/Ending Ceremony .
...........................................Special Message for Opening/Ending Ceremony .
.........................................................................................Odometer/Tripmeter .
................................Switch the Day Mode Display and Night Mode Display .
....................................................................................................Digital Clock .
.....................................................................Display Illumination Adjustment .
....................................................................................Air Temperature Meter .
...................................................Travel Trunk & Saddlebags Open Indicator .
....................................................................................Display Type Selection .
..................................................................Changing the Information Display .
..............................................................................................Controls & Features .
.................................................................................................Ignition Switch .
.....................................................................................Reverse (RVS) Switch .
...................................................................................Cruise Control Switches .
...............................................................................Headlight Dimmer Switch .
...........................................................................................Turn Signal Switch .
......................................................................................................Horn Button .
...................................................................................Audio Control Switches .
..................................................................................................Hazard Switch .
..................................................................Headlight Beam Adjustment Knob .
....................................Rear Suspension Spring Pre-load Adjustment Switch .
.........................................................................................Ventilation Controls .
.......................................................................Windscreen Height Adjustment .
..........................................................................................Engine Stop Switch .
........................................................................................Start/Reverse Button .
12
16
22
23
24
25
27
28
29
31
32
33
34
35
37
37
38
39
39
39
40
40
40
40
41
42
42
42
42
08/07/15 09:53:43 31MCA680 0018 
clutch lever
(Models not equipped with Navigation System)
audio system controls
ignition switch
fairing pocket lock
audio system controls
throttle grip
right handlebar controls
front seat heater
switch
front brake
lever
left fairing
panel controls
left handlebar controls
left fairing
pocket
right fairing pocket
handgrip heater
switch
windscreen height lever
windscreen ventilation louver
windscreen
height lever
(Models equipped with
Comfort Package)
left side ventilation louver
right side ventilation louver
12
Instruments & Controls
Operation Component Locations
08/07/15 09:53:50 31MCA680 0019 
clutch lever
(Models equipped with Navigation System)
audio system controls
front seat heater switch
ignition switch
right handlebar controls
left handlebar
controls
front brake lever
left fairing panel
controls
right fairing panel
controls
fairing pocket lockaudio system controls
multi information display controls
handgrip heater switch
left fairing
pocket
right fairing pocket
windscreen height lever
windscreen ventilation louver
windscreen height lever
throttle grip
right side ventilation
louver
left side ventilation louver
13
Instruments & Controls
Operation Component Locations
08/07/15 09:53:55 31MCA680 0020 
trunk side pocket
saddlebag
helmet holder
radio antenna
rear brake pedal
foot warmer ventilation louver
(Models equipped with Comfort Package)
14
Instruments & Controls
Operation Component Locations
08/07/15 09:54:00 31MCA680 0021 
front headset terminal
trunk
rear headset terminal
trunk side pocket
saddlebagshift lever
helmet holder
foot warmer ventilation louver lever
(Models equipped with Comfort Package)
foot warmer ventilation louver
(Models equipped with Comfort Package)
rear seat heater switch
(Models equipped with Comfort Package)
15
Instruments & Controls
Operation Component Locations
08/07/15 09:54:05 31MCA680 0022 
right turn signal indicator
speedometer
tachometer red zone
tachometer
reverse system indicator
neutral indicator
overdrive indicator
CRUISE ON indicator
CRUISE SET indicator high beam indicator
fuel gauge
low fuel indicator
low oil pressure indicator
PGM-FI malfunction
indicator lamp (MIL)
coolant
temperature
gauge
left turn signal indicator
anti-lock brake system
(ABS) indicator
(Models equipped
with ABS)
low tire pressure indicator
side stand indicator
tire pressure
monitoring system
(TPMS) indicator
16
Gauges & Indicators
Instruments & Controls
The gauges and indicators on your motorcycle keep you informed, alert you to
possible problems, and make your riding safer and more enjoyable. Refer to the
gauges and indicators frequently. Their functions are described on the following
pages.
USA: Speedometer, odometer & tripmeter read in miles.
Canada: Speedometer, odometer & tripmeter read in kilometers.
08/07/15 09:54:12 31MCA680 0023 
17
Gauges & Indicators
Instruments & Controls
Lamp Check.
Lamp Check
When applicable, the high beam and neutral indicators come on when you turn
the ignition switch ON and remain on until you select the low beam or shift out
of neutral.
If one of these indicators does not come on when it should, have your Honda
dealer check for problems.
Most of the indicator lights come on when you turn the ignition switch ON so
you can check that they are working. Some indicators turn off after a few
seconds; others remain on until or after the engine is started. The ABS indicator
goes off after you ride the motorcycle at a speed above 6 mph (10 km/h).
All indicators are identified on the following pages with the words:
speedometer
Shows riding speed in miles (USA) or kilometers (Canada) per hour.
tachometer
Shows engine speed in revolutions per minute (rpm).
tachometer red zone
Shows excessive engine rpm range (indicated from the beginning of the
tachometer red zone) in which operation may damage the engine. Do not let the
tachometer needle enter the red zone.
08/07/15 09:54:23 31MCA680 0024 
18
Gauges & Indicators
Instruments & Controls
Lamp Check
Flashes when either turn signal operates.
reverse system indicator
Lights when the reverse system is engaged.
neutral indicator (green)
Lights when the transmission is in neutral.
overdrive indicator
Lights when the transmission is in overdrive (5th gear).
low oil pressure indicator (red)
Lights when engine oil pressure is low enough to cause engine damage. If the
low oil pressure indicator lights during operation, pull safely to the side of the
road. See page for instructions and cautions. .
turn signal indicator (green)
231
08/07/16 10:50:08 31MCA680 0025 
19
Gauges & Indicators
Instruments & Controls
Lamp Check.
Lamp Check
Lamp Check
Lights when there is any abnormality in the PGM-FI (Programmed Fuel
Injection) system. Should also light for a few seconds and then go off when the
ignition switch is turned ON and the engine stop switch is at RUN. If the
indicator comes on at any other time, reduce speed and take your motorcycle to
a Honda dealer as soon as possible.
tire pressure monitoring system (TPMS) indicator
(amber)
Lights when there is any abnormality in the tire pressure monitoring system
(TPMS). Should also light for a few seconds and then go off when the ignition
switch is turned ON. See page for instructions and cautions. .
If the indicator turns on and stays on at any other time, there is a problem with
the TPMS, and the indicator will remain on until the problem is solved.
Or if the TPMS indicator does not turn on when you turn the ignition switch to
ON, it is possible there is a problem and it will not turn on until the problem is
solved.
With this indicator on, the low tire pressure indicator will not come on when a
tire loses pressure, take the motorcycle to your Honda dealer to have the system
checked.
low tire pressure indicator (amber)
Flashes or lights when one or more of your motorcycle tires are significantly
low on pressure. Should also light for a few seconds and then go off when the
ignition switch is turned ON. If the indicator comes on while riding, stop the
motorcycle in a safe place and check the front and rear tires for inflation.
See page for instructions and cautions. .
PGM-FI malfunction indicator lamp (MIL) (amber)
85
85
08/07/15 09:54:41 31MCA680 0026 
(Models equipped with ABS)
20
Gauges & Indicators
Instruments & Controls
ABS Indicator
Lamp Check.
Lights when there is any abnormality in the anti-lock brake system (ABS).
Normally, this indicator comes on when the ignition switch is turned ON, and
goes off after you ride the motorcycle at a speed above 6 mph (10 km/h). If the
indicator comes on while riding, stop the motorcycle in a safe place and turn off
the engine. Refer to , page . For information about ABS, see
page .
Lights when the side stand is put down to indicate that the side stand ignition
cut-off system (page ) is activated.
side stand indicator (amber)
Lights when the headlight is on high beam.
high beam indicator (blue)
Lights when the cruise control SET/DECEL switch is on.
CRUISE SET indicator
Lights when the CRUISE CONTROL master switch is on.
CRUISE ON indicator
Anti-Lock Brake System indicator (ABS) (amber)
83
82
73
08/07/15 09:54:53 31MCA680 0027 
21
Gauges & Indicators
Instruments & Controls
Lamp Check.
coolant temperature gauge
low fuel indicator
fuel gauge
Shows the approximate fuel supply available, if your motorcycle is on a level
surface.
At F (Full) there are 6.6 US gal (25 liters), including reserve supply. When the
gauge needle enters the red band, fuel will be low and you should refill the tank
as soon as possible. The amount of fuel left in the tank when the needle enters
the red band is approximately 0.79 US gal (3.0 liters).
Shows engine coolant temperature. When the needle moves above the C (cold)
mark, the engine is warm enough to start riding. If the needle approaches the H
(hot) mark, pull safely to the side of the road. See page for instructions
and cautions.
Lights as a reminder to refuel soon. The indicator comes on when there is about
1.16 US gal (4.4 liters) left in the fuel tank.
229
08/07/15 09:55:00 31MCA680 0028 
INFO button DIM button
DISP button
TRIP button
DIM buttonINFO button
(Models not equipped with Navigation System)
(Models equipped with Navigation System)
SETUP button
TRIP button
22
Multi Information Display
Instruments & Controls
Your motorcycle is equipped with a Multi Information Display that presents
various displays. This section explains display functions and operations.
The Opening/Ending Ceremony and Clock can be set with the Setup/Info
Menu of the Navigation System. Refer to the Navigation System Manual for
further information.
08/07/15 09:55:06 31MCA680 0029 
(Models not equipped with Navigation System)
23
Opening/Ending Ceremony
Multi Information Display
Instruments & Controls
When the ignition switch is turned OFF, the display presents an ‘‘ending
ceremony.’’
When the ignition switch is turned ON or ACC, the display presents an
‘‘opening ceremony.’’
08/07/15 09:55:14 31MCA680 0030 
(Models not equipped with Navigation System)
24
On/Off-Opening/Ending Ceremony
Multi Information Display
Instruments & Controls
The opening/ending ceremony can be turned off.
Push the DIM button to show the OPENING/ENDING CEREMONY display.
Push the TRIP or INFO button to switch ON/OFF.
Push the SETUP button to fix the setting.
Push the SETUP button to show the CLOCK ADJUST display (page ).
When approximately 5 seconds pass without operating a button on the
OPENING/ENDING CEREMONY display, the display automatically returns to
the previous display.
ceremony display ON
ceremony display OFF
1.
2.
3.
4.
31
08/07/15 09:55:25 31MCA680 0031 
(Models not equipped with Navigation System)
INFO button TRIP button
TRIP button
SETUP button
SETUP button
25
Special Message for Opening/Ending Ceremony
Multi Information Display
Instruments & Controls
Push and hold the TRIP button. Push and hold the INFO button. Then push
the SETUP button.
Select ‘‘ON’’ on the OPENING/ENDING CEREMONY display (page ).
Use the TRIP button to select the ‘‘SPL’’ function.
The display should now show ‘‘SPECIAL!’’ in the middle line.
The display should now show ‘‘STANDARD’’ in the middle line.
Push the SETUP button to select the ‘‘YES’’ function.
Push the SETUP button to select the ‘‘SET’’ function.
The display should now show ‘‘CHANGE OK?’’ in the middle line.
1.
2.
3.
4.
5.
6.
24
08/07/15 09:55:35 31MCA680 0032 
!”# *+ <?
TRIP buttonINFO button
26
Multi Information Display
Instruments & Controls
Use the INFO and TRIP buttons to cycle through the alphabet, number and
symbol selection.
When you have completed your message, push the SETUP button to select
the ‘‘SET’’ function which will lock in your special message to be used for
the opening and ending ceremony.
When approximately 5 seconds pass without operating a button, the display
automatically returns to the previous display.
7.
8.
Capital Letters
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Numbers
0123456789
Symbols
$%& () , ./ =
08/07/15 09:55:42 31MCA680 0033 
tripmeter
tripmeter
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
odometer
odometer
TRIP button
TRIP button
For USA
odometer
tripmeter
For Canada
27
Odometer/Tripmeter
Multi Information Display
Instruments & Controls
ODO (Odometer)
TRIP (Tripmeter)
shows the total miles (USA) or kilometers (Canada)
ridden.
shows the number of miles (USA) or kilometers
(Canada) ridden since you last reset the meter.
To reset the tripmeter, push and hold the TRIP button with the display in the
‘‘TRIP A’’ or ‘‘TRIP B’’ mode.
Push the TRIP button to select the ‘‘TRIP A’’ or ‘‘TRIP B’’ mode.
The tripmeter will show mileage in two sub modes, ‘‘TRIP A’’ and ‘‘TRIP B.’’
08/07/15 09:55:56 31MCA680 0034 
(Models equipped with Navigation System)
DIM button DIM button
For USA
For Canada
28
Switch the Day Mode Display and Night Mode Display
Multi Information Display
Instruments & Controls
The display automatically switches to the Day mode or Night mode in
accordance with the time. To switch the display manually, push and hold the
DIM button.
Refer to the Navigation System Manual for further information.
08/07/15 09:56:05 31MCA680 0035 
(Models not equipped with Navigation System)
INFO button
SETUP button TRIP button
DIM button
29
Display Illumination Adjustment
Multi Information Display
Instruments & Controls
To adjust the brightness of the display:
Push the DIM button once. ‘‘DIMMER’’ will display.
To brighten the display push the TRIP button ( ).
push the INFO button ( ).To darken the display
(The brighter and darker ranges each have six steps.)
To set the selected step push the SETUP button.
08/07/15 09:56:14 31MCA680 0036 
(Models equipped with Navigation System)
DISP button
DIM button
TRIP button
INFO button
For USA For USA For CanadaFor Canada
30
Multi Information Display
Instruments & Controls
To adjust the brightness of the display:
Push the DIM button once. The display shows ‘‘Dimmer/Day’’ at Day mode,
while it shows ‘‘Dimmer/Night’’ at Night mode.
To switch the display between ‘‘Dimmer/Day’’ and ‘‘Dimmer/Night’’, select
the display between Day mode and Night mode (page ) and push the DIM
button.
To set the selected step push the DISP button.
(The brighter and darker ranges each have six steps.)
push the INFO button ( ).To darken the display
To brighten the display push the TRIP button ( ).
When approximately 5 seconds pass without operating a button, the display
automatically returns to the previous display.
The display can become dark when the display is very hot. If it does not restore
the original brightness, consult your Honda dealer.
28
08/07/15 09:56:34 31MCA680 0037 
(Models not equipped with Navigation System)
INFO button TRIP button
DIM button
(Models equipped with Navigation System)
SETUP button
31
Digital Clock
Multi Information Display
Instruments & Controls
Push the SETUP button once. ‘‘CLOCK ADJUST’’ will display.
Turn the ignition switch to ON or ACC.
The display shows the hour and minute.
To adjust the time:
To set the hour, press and release the INFO button until the desired hour
appears.
Quick setting push and hold the INFO button until the desired hour
appears.
To set the minute, press and release the TRIP button until the desired minute
appears.
Quick setting push and hold the TRIP button until the desired minute
appears.
Once the time is selected, push the SETUP button to enter the time.
When approximately 5 seconds pass without operating a button on the CLOCK
ADJUST display, the display automatically returns to the previous display.
Be sure to push the SETUP button to enter your adjusted time in the system.
The navigation system receives signals from the Global Positioning System
(GPS) and automatically sets the time display based on the time zone you select.
You may also set the time manually using the ‘‘Other’’ option. Refer to the
Navigation System Manual.
1.
2.
3.
4.
5.
08/07/15 09:56:47 31MCA680 0038 
−−
−−
INFO button
INFO button
(Models not equipped with Navigation System)
(Models equipped with Navigation System)
(Models not equipped with Navigation System)
(Models equipped with Navigation System)
For USA
For Canada
32
Air Temperature Meter
Multi Information Display
Instruments & Controls
Push the INFO button once to display the air temperature.
After 5 seconds, the previous display returns.
USA: Fahrenheit (°F)
Canada: Centigrade (°C)
Temperature Display
‘‘- -’’ is displayed
actual air temperature is indicated.
The display will remain and blink
‘‘122°F (50°C)’’
The temperature sensor is located in the upper fairing. Therefore, the
temperature reading can be affected by heat reflection from the road surface,
engine heat, and the exhaust from the surrounding traffic. This can cause an
error in the temperature reading when your speed is under 19 mph (30 km/h).
Below 13°F ( 11°C)
Between:
14°F 158°F ( 10°C 70°C)
Above 158°F (70°C)
‘‘- -’’ is displayed
actual air temperature is indicated.
The display will remain
‘‘158°F (70°C)’’
Below 13°F ( 11°C)
Between:
14°F 122°F ( 10°C 50°C)
Above 122°F (50°C)
08/07/16 10:50:21 31MCA680 0039 
open indicator
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
open indicator
For USA
For Canada
33
Travel Trunk & Saddlebags Open Indicator
Multi Information Display
Instruments & Controls
This indicator turns on when the ignition switch is ON and your motorcycle’s
travel trunk or saddlebags are open.
If all compartments are not fully closed, the display will blink OPEN and
indicate the open compartment(s).
Saddlebag open
Travel Trunk open
08/07/15 09:57:08 31MCA680 0040 
(Models equipped with Navigation System)
DISP button
For CanadaFor USA
34
Display Type Selection
Multi Information Display
Instruments & Controls
Press the DISP button to toggle between:
The Multi Information Display (time, odometer, and tripmeter)
A Navi full screen map with the time
A split screen with the Multi information condensed in a bar below the map.
08/07/15 09:57:17 31MCA680 0041 
INFO button
INFO button
INFO button
(Models not equipped with Navigation System)
35
Changing the Information Display
Multi Information Display
Instruments & Controls
The display changes as follows each time the INFO button is pushed.
When approximately 5 seconds pass without operating a button, the display
automatically returns to the previous display.
08/07/15 09:57:26 31MCA680 0042 
(Models equipped with Navigation System)
INFO button
INFO button
INFO button
INFO button
INFO button
INFO button
For CanadaFor USA
36
Multi Information Display
Instruments & Controls
08/07/15 09:57:36 31MCA680 0043 
ACC
ON
OFF
LOCK
(steering lock)
No electrical circuits function.
Locks the steering head.
No electrical circuits function.
Electrical circuits on.
Only the accessory circuits
function.
cannot be
removed
cannot be
removed
can be
removed
can be
removed
ON
ACC
LOCK
OFF
Key Position Function Key Removal
37
Ignition Switch
Controls & Features
Instruments & Controls
The ignition switch is used for starting and stopping the engine (page ) and to
lock the steering for theft prevention (page ). Insert the key and turn it to the
right for the ON and ACC (accessory) positions.
Push down on the key and turn it to the left to the LOCK (steering lock) position.
To unlock the steering lock, insert and push down on the key and turn it to the
right to the OFF position.
73
89
08/07/15 09:57:50 31MCA680 0044 
CRUISE CONTROL master switch
reverse (RVS) switch
OFF
RUN
RESUME/ACCEL switch
SET/DECEL switch
start/reverse button
engine stop switch
RIGHT HANDLEBAR
38
Engine Stop Switch
Controls & Features
Instruments & Controls
The engine stop switch is used to stop the engine in an emergency. To operate,
turn the switch to the OFF position. The switch must be in the RUN position to
start the engine, and it should normally remain in the RUN position even when
the engine is OFF.
If your motorcycle is stopped with the ignition switch ON and the engine stop
switch OFF, the headlight and taillight will remain on, resulting in battery
discharge.
08/07/15 09:57:56 31MCA680 0045 
39
Start/Reverse Button
Reverse (RVS) Switch
Cruise Control Switches
Controls & Features
Instruments & Controls
Starting Procedure,
Riding in Reverse,
Riding in Reverse,
Riding with Cruise
Control,
The start/reverse button is used for starting the engine. Pushing the start/reverse
button in starts the engine. See page .
When the start/reverse button is pushed, the starter motor will crank the engine;
the headlight will automatically go out, but the taillight will stay on.
The starter motor will not operate if the engine stop switch is in the OFF
position when the start/reverse button is pushed.
The start/reverse button is also used for reverse riding. See
page .
The reverse switch is used to shift into reverse gear so you may back up your
motorcycle. For instructions, see page .
Three switches are used to activate, adjust, and de-activate the cruise control
system: a CRUISE CONTROL master switch, a SET/DECEL switch, and a
RESUME/ACCEL switch. For operating instructions, see
page .
74
78
78
93
08/07/15 09:58:04 31MCA680 0046 
LEFT HANDLEBAR
headlight dimmer switch
audio control switches
turn signal switch
horn button
HI
LO
40
Headlight Dimmer Switch
Turn Signal Switch
Horn Button
Audio Control Switches
Controls & Features
Instruments & Controls
Audio Systems,
The headlight dimmer switch is used to change between the high and low
headlight beams. To operate, push the button to HI for high beam, LO for low
beam.
The turn signal switch is used to signal a turn. To operate, move the switch all
the way to the left or right and release it.
The appropriate turn signal lights will start blinking. The lights will
automatically stop when you complete the turn. (You can manually cancel the
lights by pushing the switch in.)
To signal a lane change, move the switch all the way to the left or right and
release it. The turn signal lights will automatically stop in 7 seconds or after
riding 110 yards (120 m).
The horn is used to alert other motorists. To operate, push the button.
The audio control switches mounted on the left handlebar and above the fuel fill
compartment are used to operate the radio. For specific features and operation
instructions, see page .97
08/07/15 09:58:14 31MCA680 0047 
LEFT SIDE
headlight beam adjustment knob
rear suspension spring pre-load adjustment switch
hazard switch
41
Hazard Switch
Controls & Features
Instruments & Controls
The hazard switch is used to activate the hazard lights on your motorcycle if you
need to stop near heavy traffic or if your motorcycle is disabled.
To operate, turn the ignition key to the ON or ACC position, and push the
hazard switch. The front and rear turn signals will blink simultaneously until
you push the switch again.
If you anticipate using the hazard system for an extended time, use the ACC
position and turn off all unnecessary accessories to conserve battery capacity.
Be sure to turn the switch off when the hazard warning is no longer required, or
the turn signals will not work properly and may confuse other drivers.
08/07/15 09:58:20 31MCA680 0048 
42
Headlight Beam Adjustment Knob
Rear Suspension Spring Pre-load Adjustment Switch
Ventilation Controls
Windscreen Height Adjustment
Controls & Features
Instruments & Controls
Rear Suspension Spring Pre-load
Adjustment,
The adjustment knob is used to raise or lower the height of the headlight beam.
You may need to adjust the headlight if you change to a lighter or heavier load
than you normally carry on your motorcycle.
If you carry a heavier or lighter than normal load, you may need to adjust your
headlight beam so you can better see the road ahead and don’t blind oncoming
drivers. Obey local laws and regulations concerning headlight adjustment.
To operate, start the engine.
To lower the beam, turn the headlight beam adjustment knob counterclockwise.
To raise the beam, turn the knob clockwise.
The rear suspension spring pre-load adjustment switch is used to adjust the rear
suspension to suit your load and riding conditions. For instructions on when and
how to adjust the rear suspension, see
page .
The windscreen height adjustment levers are used to raise or lower your
windscreen to suit your riding preference. For instructions, see page .
The windscreen ventilation louver is used to direct the flow of fresh air
(page ).
The side ventilation louvers and foot warmer ventilation louvers are used to
direct the flow of warm air (pages , ).
63
181
64
65 66
08/07/15 09:58:29 31MCA680 0049 
43
Before Riding
Before Riding
Before each ride, you need to make sure you and your Honda are both ready to
ride. To help get you prepared, this section discusses how to evaluate your riding
readiness, what items you should check on your motorcycle, and adjustments to
make for your comfort, convenience, or safety. This section also includes
important information about loading.
For information about adjusting the suspension on your Honda, see page .
......................................................................................Are You Ready to Ride? .
....................................................................Is Your Motorcycle Ready to Ride? .
....................................................................................Load Limits & Guidelines .
.............................................................................................Cargo Compartment .
..................................................................Comfort & Convenience Adjustment .
...........................................................................................................Accessories .
............................................................................................Protective Apparel .
..................................................................................................Rider Training .
...........................................................................................Pre-ride Inspection .
.............................................................................................................Loading .
......................................................................................................Load Limits .
..........................................................................................Loading Guidelines .
.............................................................................Travel Trunk & Saddlebags .
..........................................................................................Remote Transmitter .
.................................................................................................Fairing Pockets .
..........................................................................................Trunk Side Pockets .
.......................................................................Windscreen Height Adjustment .
.......................................................................Windscreen Ventilation Louver .
.................................................................................Side Ventilation Louvers .
...................................................................Foot Warmer Ventilation Louvers .
...............................................................................................Handgrip Heater .
.......................................................................................................Seat Heater .
.............................................................................Accessory (ACC) Terminal .
181
44
44
46
47
47
49
49
50
51
52
52
56
60
61
62
63
64
65
66
67
68
69
69
08/07/15 09:58:45 31MCA680 0050 
44
Protective Apparel
Before Riding
Are You Ready to Ride?
Before you ride your motorcycle for the first time, we urge you to:
Before each ride, be sure:
Make sure your passenger is ready to ride, too, and is wearing proper gear
including a helmet.
Read this owner’s manual.
Make sure you understand all the safety messages.
Know how to operate all the controls.
You feel well and are in good physical and mental condition.
You don’t have any alcohol or drugs in your system.
You are wearing an approved motorcycle helmet (with chin strap tightened
securely), eye protection, and other protective clothing.
If you are not riding with a passenger and want to carry an extra helmet, use a
commercially-available elastic cord, strap, or net to secure the helmet to the seat.
Thetraveltrunkmayalsobeusedtostoreanextrahelmet.
For your safety, we strongly recommend that you always wear an approved
motorcycle helmet, eye protection, boots, gloves, long pants, and a long-sleeved
shirt or jacket whenever you ride.
Although complete protection is not possible, wearing proper gear can reduce
the chance of injury when you ride.
Following are suggestions to help you choose the proper gear.
08/07/15 09:58:55 31MCA680 0051 
Not wearing a helmet increases
the chance of serious injury or
death in a crash.
Be sure you and your
passenger always wear a
helmet, eye protection, and
other protective apparel when
you ride.
45
Before Riding
Are You Ready to Ride?
Helmets and Eye Protection
Your helmet is your most important piece of riding gear because it offers the
best protection against head injuries. A helmet should fit your head comfortably
and securely. A bright-colored helmet and reflective strips can make you more
noticeable in traffic.
An open-face helmet offers some protection, but a full-face helmet offers more.
Regardless of the style, look for a DOT (Department of Transportation) sticker
on any helmet you buy (USA only). Always wear a face shield or goggles to
protect your eyes and help your vision.
Additional Riding Gear
In addition to a helmet and eye protection, we also recommend:
Sturdy boots with non-slip soles to help protect your feet and ankles.
Leather gloves to help protect your hands.
A motorcycle riding suit or jacket for comfort as well as protection.
Bright-colored and reflective clothing can help make you more noticeable in
traffic. Avoid loose clothes that could get caught on any part of your
motorcycle.
08/07/15 09:59:03 31MCA680 0052 
46
Rider Training
Before Riding
Are You Ready to Ride?
Riding Tips
Developing your riding skills is an on-going process. Even if you have ridden
other motorcycles, take time to become familiar with how this motorcycle works
and handles. Practice riding the motorcycle in a safe area to build your skills. Do
not ride in traffic until you get accustomed to the motorcycle’s controls, and feel
comfortable with its size and weight.
We urge all riders to take a certified course approved by the Motorcycle Safety
Foundation (MSF). New riders should start with the basic course, and even
experienced riders will find the advanced course beneficial. For information
about the MSF training course nearest you, call the national toll-free number:
(800) 446-9227.
Other riding tips can be found in the booklet that came with your
motorcycle (USA only).
08/07/15 09:59:08 31MCA680 0053 
Improperly maintaining this
motorcycle or failing to correct a
problem before riding can cause
acrashinwhichyoucanbe
seriously hurt or killed.
Always perform a pre-ride
inspection before every ride and
correct any problems.
47
Pre-ride Inspection
Before Riding
Is Your Motorcycle Ready to Ride?
Leaks,
Loose
Parts
Lights
Tires
&
Wheels
Before each ride, it’s important to inspect your motorcycle and make sure any
problem you find is corrected. A pre-ride inspection is a must, not only for
safety, but because having a breakdown, or even a flat tire, can be a major
inconvenience.
Check the following items before you get on the motorcycle:
Walk around your motorcycle and look for anything that appears
unusual, such as a leak or loose cable.
Make sure the headlight, brakelight, taillight, and turn signals are
working properly.
Look at the tires. If a tire appears low, use an air pressure gauge
to check its pressure. Also look for signs of excessive wear
(page ) or damage to the tires and wheels.191
08/07/15 09:59:17 31MCA680 0054 
48
Before Riding
Is Your Motorcycle Ready to Ride?
Load Limits
Cargo
Adjustments
Throttle
Brakes
Indicators
Gauges
Periodic Maintenance
If you are carrying a passenger or cargo, also check the following:
Make sure you do not exceed the load limits (page ).
Check that all cargo is secure.
Adjust the rear suspension (page ) according to your load.
Check these items after you get on the motorcycle:
Rotate the throttle to check it moves smoothly without binding.
Pull the brake lever and press on the brake pedal to check that
they operate normally.
Turn the ignition on and check for normal operation of the
indicators (page ).
Check the fuel level and other gauges (page ).
If you haven’t ridden the motorcycle in over a week, you should also check
other items, such as the oil level and other fluids. See
(page ). Periodic maintenance should also be done at least once a month, no
matter how often you ride.
Remember, be sure to take care of any problem you find, or have your Honda
dealer correct it before you ride.
50
16
16
180
143
08/07/15 09:59:30 31MCA680 0055 
Overloading or improper loading
can cause a crash and you can
be seriously hurt or killed.
Follow all load limits and other
loading guidelines in this
manual.
49
Loading
Before Riding
Load Limits & Guidelines
Your motorcycle has been designed to carry you and one passenger. When you
carry a passenger, you may feel some difference during acceleration and
braking. But so long as you keep your motorcycle well-maintained, with good
tires and brakes, you can safely carry loads within the given limits and
guidelines.
However, exceeding the weight limit or carrying an unbalanced load can
seriously impair your motorcycle’s handling, braking, and stability. Non-Honda
accessories, improper modifications, and poor maintenance can also reduce your
safety margin.
How much weight you put on your motorcycle, and how you load it, are
important to your safety. Anytime you ride with a passenger or cargo, you
should be aware of the following information.
08/07/15 09:59:36 31MCA680 0056 
410 lbs (186 kg)
71 lbs (32 kg)
20.0 lbs (9.0 kg)
20.0 lbs (9.0 kg)
66 lbs (30 kg)
4.5 lbs (2.0 kg)
1.0 lbs (0.5 kg)
4.5 lbs (2.0 kg)
=
=
=
=
=
=
=
=
=
419 lbs (190 kg)
(Canada only)
(Models not equipped
with Airbag)
(Models equipped with
Airbag)
50
Load Limits
Before Riding
Load Limits & Guidelines
maximum weight capacity:
maximum cargo weight:
travel trunk
each saddlebag
each fairing pocket
(Models not equipped with Airbag)
fairing pocket
(Models equipped with Airbag)
each trunk side pocket
Following are the load limits for your motorcycle:
includes the weight of the rider,
passenger, all cargo, and all accessories.
includes following maximum compartment
weights:
The weight of added accessories will reduce the maximum cargo weight you can
carry.
08/07/15 09:59:46 31MCA680 0057 
51
Loading Guidelines
Load Limits & Guidelines
Before Riding
Improperly loading your motorcycle can affect its stability and handling. Even
if your motorcycle is properly loaded, you should ride at reduced speeds and
never exceed 80 mph (130 km/h) when carrying cargo.
Follow these guidelines whenever you carry a passenger or cargo:
Check that both tires are properly inflated (page ).
To prevent loose items from creating a hazard, make sure that all cargo is tied
down securely before you ride.
Place cargo weight as low and close to the center of your motorcycle as
possible.
Balance cargo weight evenly on both sides.
If you change your normal load, you may need to adjust the rear suspension
(page ).
Do not attach large or heavy items (such as a sleeping bag or tent) to the
handlebar, forks, or fender.
Make sure all cargo compartments are securely closed.
Check the headlight beam adjustment if you change your normal load.
190
180
08/07/15 09:59:55 31MCA680 0058 
20.0 lbs (9.0 kg) each
LOCK UUNNLLOOCCKK
52
Travel Trunk & Saddlebags
Cargo Compartment
Before Riding
Your motorcycle comes with a lockable travel trunk and dual saddlebags, plus
two trunk side pockets and front fairing pockets.
Instructions on how to open, close, and lock these compartments follow.
The travel trunk and saddlebags are for lightweight items.
Cargo in the travel trunk and both saddlebags should not exceed:
However, regardless of compartment capacity, be sure you do not exceed the
maximum load and cargo weight limits (page ).
To Lock & Unlock the Travel Trunk & Saddlebags
The travel trunk and saddlebags can be locked and unlocked with the ignition
key or remote transmitter.
To use the remote transmitter, see page .
To lock:
Insert the ignition key and turn it counterclockwise.
To unlock:
Insert the ignition key and turn it clockwise.
50
56
08/07/15 10:00:04 31MCA680 0059 
latch levers
TO CLOSE:
right saddlebag
travel trunk
left saddlebag
OPEN
53
Cargo Compartment
Before Riding
To Open & Shut the Travel Trunk & Saddlebags
To open the travel trunk, pull the middle latch lever down.
To open the right or left saddlebag, pull the right or left latch lever down.
To shut each compartment, place your hands flat on the edges of its lid and press
down until it is firmly closed and check the travel trunk & saddlebags open
indicator is not displayed.
To lock the all compartments, use the ignition key or transmitter.
08/07/15 10:00:17 31MCA680 0060 
plug
rod
PUSH
REAR
54
Cargo Compartment
Before Riding
If a Saddlebag Won’t Open
Open the travel trunk and remove the plug from the right or left access hole in
the floor of the trunk.
Put your finger through the access hole and push the rod.
The saddlebag should open.
1.
2.
08/07/15 10:00:22 31MCA680 0061 
storage box
cover
55
Cargo Compartment
Before Riding
Storage Box
Your motorcycle has a storage box in the travel trunk. To open the storage box,
push forward on the cover and raise it.
08/07/15 10:00:27 31MCA680 0062 
unlock button
lock button
56
Remote Transmitter
Cargo Compartment
Before Riding
You can lock and unlock your motorcycle’s trunk and saddlebags with the
remote transmitter.
You cannot lock the compartments with the remote transmitter if any
compartment is not fully closed. (The front and rear turn signal lights will blink
ten times.)
If you unlock the compartments with the transmitter, but do not open any of the
compartments within thirty seconds, the compartments automatically relock.
If the ignition switch is left off for more than one month, the remote transmitter
will no longer operate the remote control system. To reset the system, turn the
ignition switch ON.
To lock the compartments push the lock button.
(The front and rear turn signal lights will blink once.)
To unlock the compartments push the unlock button.
(The front and rear turn signal lights will blink two times.)
08/07/15 10:00:35 31MCA680 0063 
CALL button
trunk release button
57
Cargo Compartment
Before Riding
Call Mode
To open the trunk, push and hold the trunk release button for approximately
one second.
The call mode is provided to let you locate your motorcycle when it is parked in
a large lot.
Push and hold the CALL button, the horn will sound and the turn signal lights
will blink two times.
When the ignition switch is in the ON or ACC position:
You can lock and unlock the compartments.
The trunk release button will not operate.
The call mode will not operate.
08/07/15 10:00:43 31MCA680 0064 
mark
LED
mark
LOCK
OPEN
58
Cargo Compartment
Before Riding
Replacing the Battery
When the remote transmitter’s battery begins to get weak, it may take several
pushes on the button to lock or unlock the compartments, and the LED will get
dim. Replace the battery as soon as possible.
Battery type: CR2025
Use a coin to turn the round cover on the back of the transmitter
counterclockwise.
Remove the old battery and note the polarity. Make sure the polarity of the
new battery is the same ( side facing up), then insert it in the transmitter.
Align the mark on the cover with the mark on the transmitter, then
set the cover in place and turn it clockwise.
Recycle or dispose of batteries properly, according to local regulations.
Improper battery disposal can harm the environment.
1.
2.
3.
08/07/15 10:00:51 31MCA680 0065 
59
Cargo Compartment
Before Riding
Transmitter Care
As required by the FCC:
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada Standard RSS-210. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference that may cause
undesired operation of the device.
Avoid severe shock to the transmitter, such as dropping or throwing it. Also,
protect it from extreme hot or cold temperatures.
Clean the transmitter case with a soft cloth. Do not use strong cleaners or
solvents that could harm the case. Immersing the transmitter in any liquid will
harm the transmitter and cause it to not function properly.
If you lose a transmitter, you will need to have the replacement programmed to
your motorcycle’s system by your Honda dealer. Any other transmitters you
have will also need to be reprogrammed.
08/07/15 10:00:58 31MCA680 0066 
4.5 lbs (2.0 kg)
LEFT SIDE
RIGHT SIDE
button ignition key
left fairing pocket right fairing pocket
OOPPEENN
PPUUSSHH
(M
odels not equipped with Airbag)
(Models not equipped with Airbag)
60
Fairing Pockets
Cargo Compartment
Before Riding
The fairing pockets are for lightweight items.
Cargo in each fairing pocket should not exceed:
Take care to keep gasoline, brake fluid, or other chemical solvents off the
pocket covers. They will damage the surface of the pocket covers.
Do not store valuables in the fairing pockets.
Be careful not to flood this area when washing your motorcycle.
Make sure the fairing pockets are closed before riding.
To open the left fairing pocket, push the button.
To open the right fairing pocket, insert the ignition key, turn it clockwise.
To close the fairing pocket, place your hands flat on the edges of its lid and
press down until it is firmly closed.
08/07/15 10:01:07 31MCA680 0067 
1.0 lbs (0.5 kg)
trunk side pockets
lid lever
61
Trunk Side Pockets
Cargo Compartment
Before Riding
The trunk side pockets are for soft, lightweight items.
Cargo in each trunk side pocket should not exceed:
Do not put sharp or hard objects in the trunk side pockets. Such objects could
interfere with opening the lids or damage the pockets.
To open the lid, pull the lever up.
Be careful not to flood this area when washing your motorcycle.
Make sure the trunk side pockets are closed before riding.
To close the lid, pull the lid up. Check that latch is secure.
08/07/15 10:01:15 31MCA680 0068 
62
Comfort & Convenience Adjustment
Before Riding
Suspension
Windscreen
Height
Ventilation
Louvers
Handgrip
Heater
Seat
Heater
Your motorcycle has many features you can adjust to suit your personal
preference and increase your comfort and convenience, and your passenger’s as
well.
We recommend that you take time to check the following items and make any
desired adjustments before each ride:
The rear suspension spring pre-load (page ) can be adjusted
for a softer or firmer ride using an electrical adjustment
system. You may want to adjust your suspension whenever
you change your normal load.
Your windscreen height can be adjusted slightly higher or
lower (page ).
If you need to adjust the ventilation louvers (pages ),
do it before you ride.
The range of the handgrips heater can be adjusted higher or
lower (page ).
Make sure the handgrip heater switch moves easily over the
full adjustment range.
Select the heat level you want before your ride (with the
engine running).
The range of the seat heater can be adjusted higher or lower
(page ).
Make sure the seat heater switch moves easily over the full
adjustment range.
Select the heat level you want before your ride (with the
engine running).
64 66
63
67
68
181
08/07/15 10:01:25 31MCA680 0069 
FRONT
upper mark
SECURE
lever
RREELLEEAASSEE
upper
edge
63
Windscreen Height Adjustment
Comfort & Convenience Adjustment
Before Riding
The windscreen adjuster has 6 positions.
You can adjust your windscreen height slightly higher or lower.
If possible, we recommend you adjust your windscreen height to below eye
level for better visibility.
To Adjust Windscreen Height
Pull both levers up to release the windscreen.
To raise:
Move the windscreen up to the desired position.
On both sides, align the mark on the windscreen with the upper edge of the
instrument panel.
Push the levers down to secure the windscreen.
To lower:
Move the windscreen up to the upper mark ( ), lower it all the way (to
reset the ratchet mechanism), then raise it to the desired position.
1.
2.
3.
4.
08/07/15 10:01:35 31MCA680 0070 
OOPPEENN
CCLLOOSSEE
le
ver
windscreen ventilation louver
64
Windscreen Ventilation Louver
Comfort & Convenience Adjustment
Before Riding
You can adjust the windscreen ventilation louver with the lever to control and
direct the flow of fresh air.
08/07/15 10:01:39 31MCA680 0071 
CCLLOOSSEE
OOPPEENN
CCLLOOSSEE
OOPPEENN
LEF
T SIDE RIGHT SIDE
65
Side Ventilation Louvers
Before Riding
Comfort & Convenience Adjustment
You can adjust the side ventilation louvers to direct the flow of air.
08/07/15 10:01:45 31MCA680 0072 
LEFT UPPER
CCLLOOSSEE
OOPPEENN
RRIIGGHHTT SSIIDDEELLEEFFTT SSIIDDEE
lleevveerr
(M
odels equipped with Comfort Package)
66
Foot Warmer Ventilation Louvers
Comfort & Convenience Adjustment
Before Riding
You can adjust the foot warmer ventilation louvers with the lever to control and
direct the flow of warm air.
08/07/15 10:01:50 31MCA680 0073 
RIGHT SIDE OF THE IGNITION SWITCH
handgrip heater switch
(Models equipped with Comfort Package)
67
Handgrip Heater
Before Riding
Comfort & Convenience Adjustment
The handgrip heater warms up the right and left handgrips of the handlebar for
comfortable riding on a cold day.
To operate, adjust the handgrip heater switch with the engine started. The
handgrip heater switch has 6 positions (OFF, 1, 2, 3, 4, MAX).
The handgrip heater switch is located on the right side of the ignition switch.
To warm up the handgrip heaters, turn the handgrip heater switch toward the
MAX position.
To cool down the handgrip heaters, turn the handgrip heater switch toward the
OFF position.
Do not leave the handgrip heater in the high position for a long time on a warm
day.
Wear gloves to protect your hands from the heated grips.
Do not use the handgrip heater with the engine at idle for a long time. It may
result in a low (or dead) battery.
08/07/15 10:02:02 31MCA680 0074 
LEFT SIDE OF THE IGNITION SWITCH
UNDER THE LEFT TRUNK SIDE POCKET
front seat heater switch
(Models equipped with Comfort Package)
rear seat heater switch
68
Seat Heater
Before Riding
Comfort & Convenience Adjustment
The seat heater warms up the driver’s seat (and the passenger’s seat) for
comfortable riding on a cold day.
To operate, adjust the seat heater switch with the engine started.
The front and rear seat heater switches have 6 positions (OFF, 1, 2, 3, 4, MAX).
The front seat heater switch is located on the left side of the ignition switch.
The rear seat heater switch is located under the left trunk side pocket.
To warm up the seat heater, turn the seat heater switch toward the MAX position.
To cool down the seat heater, turn the seat heater switch toward the OFF
position.
Do not apply excessive stress to the seat, e.g. by securing articles to it with tie-
down straps during transportation.
Do not use the seat when it is torn, cut or damaged as you can get burned.
Do not use the seat heater with the engine at idle for a long time. It may result in
alow(ordead)battery.
Do not leave the seat heater in the high position for a long time on a warm day.
08/07/15 10:02:11 31MCA680 0075 
fuse box
accessory (ACC)
terminal
69
Accessory (ACC) Terminal
Accessories
Before Riding
Accessories and Modifications,
Battery, If a Fuse Blows,
For your convenience, your motorcycle is equipped with an accessory (ACC)
terminal and optional accessory socket. The terminal and socket provide 12V
DC power for electrical accessories. When both terminal and socket are being
used, the combined power rating of each accessory should be 60 watts (5 amps)
or less. Before installing any accessories, read
page .
If you install any accessories, check the battery frequently to determine the state
of charge. Higher current demands may blow a fuse or discharge the battery. For
more information, see page , and page .
Connect accessory electrical leads securely, and keep them insulated, away from
hot parts and sharp edges.
4
232197
08/07/15 10:02:18 31MCA680 0076 
70
Before Riding
08/07/15 10:02:20 31MCA680 0077 
71
Basic Operation & Riding
Basic Operation & Riding
To protect your new engine and enjoy optimum performance and service life,
refer to Break-in Guidelines (page ).
This section gives basic riding instructions, including how to start and stop your
engine, and how to use the throttle, clutch, and brakes. It also provides important
information on riding with a passenger or cargo, and operating your cruise
control.
To protect the catalytic converters in your motorcycle’s exhaust system, avoid
extended idling and the use of leaded gasoline.
.......................................................................................Safe Riding Precautions .
...........................................................................Starting & Stopping the Engine .
.......................................................................................................Shifting Gears .
.................................................................................................Riding in Reverse .
.................................................................................................................Braking .
..........................................................Tire Pressure Monitoring System (TPMS) .
..................................................................................................................Parking .
........................................................................Riding with a Passenger or Cargo .
..................................................................................Riding with Cruise Control .
.........................................................................................Riding in Bad Weather .
..................................................Bank Angle Sensor Ignition Cut-off System .
................................................................................................Flooded Engine .
............................................................................................Starting Procedure .
........................................................................................................Preparation .
...................................................................................How to Stop the Engine .
.....................................................................................While You Are Riding .
......................................................................Anti-Lock Brake System (ABS) .
.........................................................................................ABS Indicator Light .
.............................................................................Low Tire Pressure Indicator .
......................................Tire Pressure Monitoring System (TPMS) Indicator .
............................................................................Changing a Tire with TPMS .
......................................................................................Theft-prevention Tips .
..................................................................................................Cruise Control .
.......................................................................................To Set Cruise Control .
.................................................................................To Change the Set Speed .
................................................................................To Cancel Cruise Control .
248
72
73
73
74
74
75
75
76
77
78
80
82
83
85
86
87
88
89
91
92
93
93
94
94
95
96
08/07/15 10:02:38 31MCA680 0078 
72
Basic Operation & Riding
Safe Riding Precautions
Motorcycle
Safety Before Riding
Before riding your motorcycle for the first time, please review the
section beginning on page 1, and the section beginning on
page .
Even if you have ridden other motorcycles, take time to become familiar with
how this motorcycle works and handles. Practice in a safe area until you build
your skills and get accustomed to the motorcycle’s size and weight.
Make sure flammable materials such as dry grass or leaves do not come in
contact with the exhaust system when riding, idling, or parking your motorcycle.
43
08/07/15 10:02:43 31MCA680 0079 
73
Preparation
Basic Operation & Riding
Starting & Stopping the Engine
Always follow the proper starting procedure described below.
For your safety, avoid starting or operating the engine in an enclosed area such
as a garage. Your motorcycle’s exhaust contains poisonous carbon monoxide
gas which can collect rapidly in an enclosed area and cause illness or death.
Your motorcycle is equipped with a side stand ignition cut-off system. If the
side stand is down –– the engine cannot be started unless the transmission is in
neutral. If the side stand is up –– the engine can be started in neutral, or in gear
with the clutch lever pulled in. After starting with the side stand down, the
engine will stop if the transmission is put in gear before raising the side stand.
Your motorcycle can be started with the transmission in gear by pulling in the
clutch lever before operating the starter.
Before starting, insert the key, turn the ignition switch ON, and confirm the
following:
The transmission is in neutral (neutral indicator is ON).
The engine stop switch is set to RUN.
The low oil pressure indicator is ON.
The ABS indicator light is ON (models equipped with ABS).
The PGM-FI malfunction indicator lamp (MIL) is OFF.
The airbag indicator is OFF (Models equipped with Airbag).
The low oil pressure indicator and airbag indicator (models equipped with
Airbag) should go off a few seconds after the engine starts. If the low oil
pressure indicator lights during operation, stop the engine immediately and
check the engine oil level.
If the airbag indicator stays on or lights during operation, have your motorcycle
inspected as soon as possible by an authorized Honda dealer (models equipped
with Airbag).
08/07/15 10:02:53 31MCA680 0080 
74
Starting Procedure
Flooded Engine
Basic Operation & Riding
Starting & Stopping the Engine
If Your Engine Quits or Won’t Start,
This motorcycle has a fuel-injected engine with an automatic fast idle. Follow
the procedure indicated below.
Any Air Temperature
Press the start button with the throttle completely closed.
The engine will not start if the throttle is fully open (because the electronic
control module cuts off the fuel supply).
If the engine fails to start after repeated attempts, it may be flooded with excess
fuel. To clear a flooded engine:
If the engine still won’t start, refer to
page .
If the engine does not start, wait 10 seconds, then follow steps again.
If the engine starts, then open the throttle slightly if idling is unstable.
Follow the normal starting procedure.
Press the start button for 5 seconds.
Open the throttle fully.
Leave the engine stop switch set to RUN.1.
2.
3.
4.
5.
14
215
08/07/15 10:03:04 31MCA680 0081 
75
Bank Angle Sensor Ignition Cut-off System
How to Stop the Engine
Basic Operation & Riding
Starting & Stopping the Engine
Your motorcycle’s banking (lean angle) sensor system is designed to
automatically stop the engine and fuel pump if the motorcycle is overturned.
Before restarting the engine, you must turn the ignition switch to the OFF
position and then back to ON. The engine will not restart until you perform this
procedure.
Normal Engine Stop
To stop the engine, shift into neutral and turn the ignition switch OFF.
The engine stop switch should normally remain in the RUN position even when
the engine is OFF.
Emergency Engine Stop
To stop the engine in an emergency, use the engine stop switch. To operate, turn
the switch to the OFF position.
If your motorcycle is stopped with the ignition switch ON and the engine stop
switch OFF, the headlight and taillight will remain on, resulting in battery
discharge.
08/07/15 10:03:12 31MCA680 0082 
76
Basic Operation & Riding
Shifting Gears
Your motorcycle has five forward gears in a one-down, four-up shift pattern
which is coordinated with a hydraulically actuated clutch system.
Learning when to shift gears comes with experience. Keep the following tips in
mind:
As a general rule, shift while moving in a straight line.
Close the throttle and pull the clutch lever in completely before shifting.
Improper shifting may damage the engine, transmission, and drive train.
Learn to recognize the engagement point as you release the clutch lever. It is
at this point the transmission of power to the rear wheel resumes.
Upshift to a higher gear or reduce throttle before engine rpm (speed) gets too
high. Learn the relationship between engine sound and the normal shifting
points.
Downshift to a lower gear before you feel the engine laboring (lugging) at
low rpm.
Avoid downshifting to help slow your motorcycle when engine rpm is near its
allowable maximum (near the tachometer red zone). In this situation, the rev
limiter in the engine ignition control module may not prevent excessive
engine speed which could damage the engine.
To prevent transmission damage, do not coast or tow the motorcycle for long
distances with the engine off.
08/07/15 10:03:21 31MCA680 0083 
77
While You Are Riding
Basic Operation & Riding
Shifting Gears
Shifting Up:
Shifting Down:
Recommended Shift Points
Ride in the highest gear that lets the engine run and accelerate smoothly. This
will give you good fuel economy and effective emissions control. When
changing gears under normal conditions, use these recommended shift points:
12 mph (20 km/h)
19 mph (30 km/h)
25 mph (40 km/h)
31 mph (50 km/h)
22 mph (35 km/h)
16 mph (25 km/h)
Pull the clutch lever in when speed drops below 12 mph (20 km/h), when engine
roughness is evident, or when engine stalling is imminent; and shift down to 1st
gear for acceleration.
While you are riding, occasionally check your gauges and indicators. Continuing
to ride with the low oil pressure indicator (red) on or the coolant temperature
gauge needle at the H (hot) mark can cause serious engine damage. Also keep an
eye on the fuel gauge and the low fuel indicator.
From OD to 4th:
From 4th to 3rd:
From 1st to 2nd:
From 2nd to 3rd:
From 3rd to 4th:
From 4th to OD:
08/07/15 10:03:30 31MCA680 0084 
RIGHT HANDLEBAR
reverse (RVS) switch
start/reverse button
78
Basic Operation & Riding
Riding in Reverse
Your motorcycle’s reverse system allows you to back out of a parking position
at slow speed.
Make sure there are no obstacles or people in the area. Avoid steep or uneven
surfaces. Carrying a passenger while reversing is not recommended because it
makes balance and control more difficult to maintain.
Sit astride the motorcycle, in your normal riding position, with both feet on
the ground.
Make sure the transmission is in neutral (neutral indicator is ON) and the side
stand is up.
Start the engine. (Make sure the RVS switch is OFF.)
Push the RVS switch to ON, then make sure the reverse system indicator
comes on.
When you are ready to back up, push the start/reverse button and hold it in.
The motorcycle will move in reverse as long as you hold the button in.
To prevent battery discharge, do not push the start/reverse button more than a
minute.
Guide the motorcycle backward cautiously, using your legs to maintain
balance.
Use extreme care to maintain balance while reversing on loose surfaces (sand,
dirt, gravel) or grease-covered pavement.
1.
2.
3.
4.
5.
6.
08/07/15 10:03:38 31MCA680 0085 
79
Basic Operation & Riding
Riding in Reverse
To avoid damaging the reverse system, do not engage or disengage reverse
when the motorcycle is moving.
Release the start/reverse button, and the motorcycle will stop.
After your motorcycle is stopped, push the RVS switch to OFF. Make sure
the reverse gear indicator goes off and the neutral indicator comes on.
If the reverse switch is in the ON position with the engine off, the engine cannot
be started.
Reverse System Overload
The reverse system is designed to move the motorcycle at a constant slow speed.
If the motorcycle begins moving slower or faster than this speed, because of
obstacles or a steep pavement angle, the system will shut off and the reverse
system indicator will turn OFF.
To resume reverse operation or normal forward operation, push the RVS switch
to the OFF position and carefully roll the motorcycle to a more level,
unobstructed surface, then start again.
7.
8.
08/07/15 10:03:44 31MCA680 0086 
80
Basic Operation & Riding
Braking
To slow or stop, apply the brake lever and brake pedal smoothly, while
downshifting to match your speed.
Gradually increase braking as you feel the brakes slowing your speed. The
increase in engine compression from downshifting will help slow your
motorcycle.
To prevent stalling the engine, pull the clutch lever in before coming to a
complete stop. For support, put your left foot down first, then your right foot
when you have finished braking.
When possible, reduce your speed or complete braking before entering a turn.
Avoid braking or closing the throttle quickly while turning. Either action may
cause one or both wheels to slip and reduce your control of your motorcycle.
Your ability to brake in a turn and to brake hard in an emergency situation are
important riding skills. We suggest attending a Motorcycle Safety Foundation
experienced rider training course (page ) to retain these skills.
When riding in wet or rainy conditions, or on loose surfaces, the ability to
maneuver and stop will be reduced. All of your actions should be smooth under
these conditions. Rapid acceleration, braking or turning may cause loss of
control.
For your safety, exercise extreme caution when braking, accelerating or turning.
When descending a long, steep grade, use engine compression braking by
downshifting, with intermittent use of both brakes. Continuous brake application
can overheat the brakes and reduce their effectiveness.
Your motorcycle is equipped with a Linked Braking System. Operating the front
brake lever applies the front brake and a portion of the rear brake. Operating the
rear brake pedal applies the rear brake and a portion of the front brake. For full
braking effectiveness, use both the lever and pedal simultaneously, as you
would with a conventional motorcycle braking system.
46
08/07/15 10:03:52 31MCA680 0087 
(Models not equipped with ABS)
81
Basic Operation & Riding
Braking
Riding with your foot resting on the brake pedal or your hand on the brake lever
may actuate the brakelight, giving a false indication to other drivers. It may also
overheat the brakes, reducing effectiveness.
Applying the brakes too hard may cause the wheels to lock and slide, reducing
control of your motorcycle. If this happens, release the brake controls, steer
straight ahead until you regain control, then reapply the brakes more gently.
As with a conventional motorcycle braking system, excessively hard application
of the brake controls may cause wheel lock, reducing control of the motorcycle.
08/07/15 10:03:57 31MCA680 0088 
(Models equipped with ABS)
82
Anti-Lock Brake System (ABS)
Basic Operation & Riding
Braking
ABS may also be activated by braking while riding over a sharp drop or rise in
the road level.
ABS is self-checking and always on.
ABS cannot make up for road conditions, bad judgment, or improper operation
of the brakes. It is still your responsibility to ride at reasonable speeds for
weather, road surface, and traffic conditions, and to leave a margin of safety.
In some situations, a motorcycle with ABS may require a longer stopping
distance to stop on loose or uneven surfaces than an equivalent motorcycle
without ABS.
This model is also equipped with an Anti-lock Brake System (ABS) designed to
help prevent wheel lock up during hard braking on uneven or other poor
surfaces while running straight. Although the wheel may not lock up if you are
braking too hard in a turn the motorcycle can still lose traction, causing a loss of
control.
08/07/15 10:04:03 31MCA680 0089 
(Models equipped with ABS)
ABS indicator light
83
ABS Indicator Light
Basic Operation & Riding
Braking
ABS does not function if the battery is discharged.
It is important to follow the tire recommendations (see page ). The ABS
computer works by comparing wheel speed.
Non-recommended tires can affect wheel speed and may confuse the ABS
computer.
ABS does not function at very low speeds (approximately 5 mph (8 km/h) or
below).
Normally, this light comes on when the ignition is turned ON and goes off after
starting to ride. If there is an ABS problem, the indicator light comes on and
remains on or blinks. The ABS system does not operate when the ABS indicator
light is on or blinking.
195
08/07/15 10:04:10 31MCA680 0090 
84
Basic Operation & Riding
Braking
If the ABS indicator light blinks while riding, stop the motorcycle in a safe
place and turn off the engine. Turn the ignition ON again. The light should
come on, and then go off after starting to ride. If it does not go off or if it blinks
again, ABS is not functioning.
However, the Linked Braking System will still provide normal stopping ability,
but you should have the ABS system checked by your Honda dealer as soon as
possible.
The ABS indicator may blink if you place the motorcycle on its center stand and
turn the rear wheel. This is normal. Turn the ignition OFF to stop the blinking.
A red LED is used for the ABS indicator light. Be sure that the LED lights when
the ignition is ON. If the LED fails to light, see your Honda dealer.
08/07/15 10:04:15 31MCA680 0091 
85
Basic Operation & Riding
Tire Pressure Monitoring System (TPMS)
As required by the FCC (USA only):
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device also complies with Industry Canada Standard RSS-210.
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference that may
cause undesired operation of the device.
Your motorcycle is equipped with a tire pressure monitoring system (TPMS)
that turns on every time you start the engine and it monitors the pressure in your
tires while riding.
Each tire has its own pressure sensor. If the air pressure of a tire becomes
significantly low while riding, the sensor in that tire sends a signal that causes
the low tire pressure indicator to turn on.
08/07/15 10:04:19 31MCA680 0092 
low tire pressure indicator
86
Low Tire Pressure Indicator
Tire Pressure Monitoring System (TPMS)
Basic Operation & Riding
If You Have a Flat Tire
If the low tire pressure indicator flashes, check your tires as soon as possible.
If the low tire pressure indicator lights constantly, one or more of your tires is
significantly underinflated. You should stop and check your tires as soon as
possible. For more information on temporary repair, see
on page .
Check the air pressure when the tires are cold. This means the motorcycle has
been parked for at least 3 hours. Add or release air, if needed, to match the
recommended cold tire pressures on page .
When the low tire pressure indicator flashes or lights, but you continue to ride,
the low tire pressure indicator will go off in some cases. It is still necessary to
check the air pressures of both tires after the tires cool. Air in the tires is
expanded with heat.
If the low tire pressure indicator does not turn off after inflating the tires to the
specified values, have your Honda dealer to check the system as soon as
possible.
Riding on a underinflated tire causes the tire to overheat and can lead to tire
failure.
Under-inflation also reduces fuel efficiency and tire tread life, and may affect
the motorcycle’s handling and stopping ability.
190
218
08/07/15 10:04:25 31MCA680 0093 
tire pressure monitoring system (TPMS) indicator
87
Tire Pressure Monitoring System (TPMS) Indicator
Tire Pressure Monitoring System (TPMS)
Basic Operation & Riding
Because tire pressure varies by temperature and other conditions, the low tire
pressure indicator may turn on unexpectedly.
Please note that the TPMS is not a substitute for proper tire maintenance, and it
is the rider’s responsibility to maintain correct tire pressure, even if under-
inflation has not reached the level of turning on the low tire pressure indicator.
For example, if you check and fill your tires in a warm area, then ride in
extremely cold weather, the tire pressure will be lower than measured and could
be underinflated and cause the low tire pressure indicator to turn on. Or, if you
check and adjust your tire pressure in cooler conditions, and ride into extremely
hot conditions, the tire may become overinflated. However, the low tire pressure
indicator will not turn on if the tires are overinflated.
The tire pressure monitoring system (TPMS) indicator comes on and stays on if
there is a problem with the tire pressure monitoring system.
If this happens, the system will shut off and no longer monitor tire pressure.
Have the system checked by your Honda dealer as soon as possible.
Also the TPMS indicator may light for the following reasons:
Interference of other electronic devices by using the same radio frequency.
Using replacement wheels not equipped with tire pressure sensors.
08/07/15 10:04:31 31MCA680 0094 
tire pressure sensor
valve stem
88
Changing a Tire with TPMS
Tire Pressure Monitoring System (TPMS)
Basic Operation & Riding
Using a puncture-repairing agent can damage the TPMS sensors, causing the
TPMS indicator to turn on. Have you motorcycle checked by your Honda
dealer as soon as possible.
Use caution to not damage the TPMS sensor if an internal plug patch must be
used to repair the tire. If you have a tire professionally repaired at a non-
Honda facility, we recommend that you have the work checked by your Honda
dealer. TPMS wheels require special handling when changing the tire. Failure
to follow the proper tire replacement procedure can result in damage to the
TPMS sensor.
Each wheel is equipped with a tire pressure sensor mounted inside the tire
behind the valve stem. You must use TPMS specific wheels. Always have your
tires serviced by your Honda dealer.
08/07/15 10:04:36 31MCA680 0095 
ignition key
TO LOCK
PUSH IN
TURN TO LOCK
TURN TO OFF
PUSH IN
TO UNLOCK
89
Basic Operation & Riding
Parking
Catalytic Converters
Look for a level parking area. If you can’t park on a paved surface, make sure
the ground surface is firm.
Make sure flammable materials such as dry grass or leaves do not come in
contact with the exhaust system when parking your motorcycle. Refer to
,page .
If you must park on a hill, leave the transmission in gear and position the rear
tire against the curb at a 45 degree angle.
Use the side or center stand to support the motorcycle while parked.
To lower the side stand, use your foot to guide it down. Remember that
lowering the side stand with the transmission in gear will stop the engine,
even if the clutch lever is pulled in. That is a function of the side stand
ignition cut-off system.
Check that the side stand is down all the way. The side stand indicator only
indicates that the side stand ignition cut-off system (page ) is activated.
To lower the center stand, stand on the left side of the motorcycle. Hold the
passenger handgrip attached to the seat. Press down on the tip of the stand
with your right foot and, simultaneously, pull up and back on the passenger
handgrip.
Use the steering lock, which locks the handlebar in place. Turn the handlebar
all the way to the left or right. Push in on the ignition key and turn it to LOCK.
Remove the key.
(To unlock the steering lock, insert and push down on the key and turn it to
the right to the OFF position.)
(cont’d)
1.
2.
3.
73
255
08/07/15 10:04:46 31MCA680 0096 
helmet holders
LOCK
knobs
OPEN
90
Basic Operation & Riding
Parking
Riding with a helmet attached to the helmet holder can cause damage to the
helmet, or damage to the paint or finish of your motorcycle.
Use the helmet holder(s) to secure your helmet(s) with your motorcycle:
Open the travel trunk (page ).
Turn the knob in the trunk to unlock the helmet holders.
Hang your helmet(s), using the D-ring on the helmet strap.
Push the holder in to lock it.
4.
52
08/07/15 10:04:52 31MCA680 0097 
91
Theft-prevention Tips
Basic Operation & Riding
Parking
Park your motorcycle in a locked garage whenever possible. If a garage isn’t
available, park in a concealed area or in a well-lit area with enough pedestrian
traffic to discourage a thief.
Always take the ignition key with you.
Always use the steering lock (page ), even if you’re parking for just a
minute or two. A thief can easily push an unlocked motorcycle to a waiting
truck.
In addition to the steering lock, use a good quality anti-theft device made
specifically to lock a motorcycle to a secure object.
If you decide to use an anti-theft device, select one of good quality and be
sure to follow the manufacturer’s instructions.
Keep your owner’s manual, current registration, and insurance information
with your motorcycle. This will make it easier for the authorities to find you
if your motorcycle is stolen and recovered.
89
08/07/15 10:04:58 31MCA680 0098 
92
Basic Operation & Riding
Riding with a Passenger or Cargo
Load Limits,
Loading Guidelines,
Your motorcycle is designed to carry you and one passenger. Whenever you add
a passenger or cargo, you must be careful not to exceed the total load limits for
this vehicle ( page ). Make sure your cargo is properly secured
(page).
Also consider adjusting the suspension (page ) for the extra load.
Be aware that carrying a passenger or heavy cargo can affect acceleration,
braking, and handling.
Before riding with a passenger, make sure your passenger is wearing the proper
protective apparel (page ).
Tell your passenger to hold the passenger handgrip, lean with you in the turns,
and keep their feet on the passenger footrests at all times, even when the
motorcycle is stopped at a traffic light.
50
51
44
180
08/07/15 10:05:04 31MCA680 0099 
−−
Improper use of the cruise
control can lead to a crash.
Use the cruise control only
when traveling on open
highways in good weather.
93
Cruise Control
Riding with Cruise Control
Basic Operation & Riding
The cruise control system allows you to maintain a steady speed between
30 100 mph (48 161 km/h). When cruise control is on, your speed will still
vary slightly, particularly going up and down hills.
Cruise control is intended for use only on straight, uncongested highways. Do
not use cruise control on city streets, winding roads, during bad weather, or at
any other time when you need total control of the throttle.
08/07/15 10:05:09 31MCA680 0100 
RIGHT HANDLEBAR
CRUISE CONTROL master switch
SET/DECEL switch
RESUME/ACCEL switch CRUISE ON
indicator
indicator
CRUISE SET
94
To Change the Set Speed
To Set Cruise Control
Basic Operation & Riding
Riding with Cruise Control
To decrease speed hold the SEL/DECEL switch in. The system will
automatically slow your motorcycle. When you reach the desired speed,
release the switch.
To increase the set speed hold the RESUME/ACCEL switch in. The
system will accelerate your motorcycle automatically. When you reach the
desired speed, release the switch.
To Automatically Change the Set Speed
To decrease the set speed tap the SET/DECEL switch.
Each quick tap (brief push and release) on either switch will change your
speed by approximately 1 mph (1.6 km/h).
To increase the set speed tap the RESUME/ACCEL switch.
To Fine Tune the Set Speed
Make sure you are in 4th gear or OD (5th gear), and that your speed is
between 30 and 100 mph (48 and 161 km/h).
Any speed above 100 mph (161 km/h) will be memorized as 100 mph (161
km/h).
Accelerate to the desired speed.
Push the SET/DECEL switch. (The CRUISE SET indicator will come on.)
Push the CRUISE CONTROL master switch. (The CRUISE ON indicator
will come on.)
1.
2.
3.
4.
08/07/15 10:05:20 31MCA680 0101 
95
To Cancel Cruise Control
Basic Operation & Riding
Riding with Cruise Control
To Manually Increase the Set Speed
To Manually Increase Vehicle Speed
Use the throttle to accelerate until you reach the desired speed.
Push and release the SET/DECEL switch.
Use the throttle in the normal manner to accelerate.
To return to the set speed, close the throttle and coast without applying the
brakes. The cruise system will maintain the speed you previously set.
To Disengage the System
To Temporarily Disengage the System
To resume cruise control:
If you are still over 30 mph (48 km/h) push the RESUME/ACCEL
switch.
If you are under 30 mph (48 km/h) use the throttle to increase road
speed above 30 mph (48 km/h) and then push the RESUME/ACCEL
switch.
Push the CRUISE CONTROL master switch until the CRUISE ON indicator
goes off. (The set speed will be erased from memory.)
Pull the brake lever or clutch lever slightly, or step on the brake pedal slightly,
or close the throttle. (The set speed will remain in memory.)
2.
1.
1.
2.
1.
1.
2.
08/07/15 10:05:29 31MCA680 0102 
96
Basic Operation & Riding
Riding in Bad Weather
If you decide to ride your motorcycle in the rain, fog, or other bad-weather
conditions, ride carefully. Wet road surfaces reduce traction, especially in turns,
and increase stopping distances when you brake.
If the weather turns bad while you are riding, take extra care and do not use
cruise control.
When riding in the rain, we recommend you adjust your windscreen height
below eye level, if possible, for better visibility (page ).
Avoid using any kind of water-dispersing product on the windscreen. It will
damage the plastic.
63
08/07/15 10:05:35 31MCA680 0103 
−−−
−−−
97
Audio Systems
Audio Systems
This section gives information about the controls and displays that make up your
audio system. All essential controls are within easy reach.
As required by the FCC (USA only):
This device complies with Part 15 of the FCC Rules for Radio Receiver.
Operation is subject to the condition that this device may not cause harmful
interference. Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate this device.
(cont’d)
Trade Name:
Model No:
Responsible Party:
Panasonic
CR LH0660A CR LH0560A CR LH0862AJ
CR LH0561A CR LH0562A CR LH0863AJ
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
......................................................................................................Audio Systems .
........................................................................MODE Knob/Button Function .
........................................................................................Display Locations .
.......................................................................................Controls Locations .
.......................................................................Audio Component Locations .
.............................................................................................System Control .
...............................................................................................Switch Output .
.......................................................................................VOLUME Control .
................................................................................................Tone Control .
................................................................................................Fader Control .
........................................................................................Ambience (AMB) .
........................................................................................................Beep Set .
......................................................................Auto Volume Control (AVC) .
..........................................................................................................Muting .
..............................................................................................Radio Antenna .
...................................................................................................Select Band .
................................................................................................Select Station .
..............................................................................................Preset Stations .
...................................................................................................Auto Select .
..................................................................................................AM/FM Radio .
...............................................................VOLUME Knob/Button Function .
99
99
100
101
103
105
106
107
108
109
111
112
113
114
115
116
116
117
118
119
120
08/07/15 10:05:52 31MCA680 0104 
98
Audio Systems
Audio Systems
........................................................................................Weather Information .
...........................................................................................Auxiliary Function .
...............................................................................Intercom (I-COM) System .
...........................................................................................Navigation System .
...............................................................Receiving Satellite Radio Service .
..............................................................................Operating the XM Radio .
......................................................................XM Radio Display Messages .
..............................................................................................Select Channel .
..............................................................................................Preset Channel .
....................................................................................Weather Band (WB) .
................................................................................Auxiliary (AUX) Input .
...........................................................................................Input Jack Setup .
.............................................................................................System Control .
.......................................................................................VOLUME Control .
...........................................................................................Intercom Muting .
.............................................................................................System Control .
...............................................................................................Switch Output .
...................................................................................Navi Volume Control .
.....................................................................................XM Radio (USA only) . 121
121
124
124
125
126
127
127
129
129
130
132
132
133
134
135
135
135
136
08/07/15 10:06:06 31MCA680 0105 
(Models not equipped
with Navigation System)
(Models equipped with
Navigation System)
:Push the MODE Knob/Button
99
MODE Knob/Button Function
Audio Systems
Audio Systems
When
audio is
OFF
When
audio is
OFF
WWhheenn aauuddiioo iiss OONN WWhheenn aauuddiioo iiss OONN
INIT
IAL
DISPLAY
INITIAL
DISPLAY
‘‘BASS’’
‘‘Bass’’
‘‘AMB’’
‘‘AMB’’
‘‘TREBLE’’
‘‘Treble’’
‘‘FADER’’
‘‘Fader’’
‘‘BEEP’’
‘‘Beep’’
08/07/15 10:06:12 31MCA680 0106 
:Push the VOLUME
Knob/Button
:When INT. COM is
ON
:When the headset is
used
:When the speaker
is used
:Vehicle equipped
with Navigation
System
‘‘AUDIO’’
‘‘Audio’’
‘‘INTERCOM VOL’’
‘‘Intercom’’
‘‘INTERCOM
MUTE’’
‘‘AUTO VOL SPK’’
‘‘Auto VOL SPK’’
‘‘Auto VOL HS’’
‘‘AUTO VOL HS’’
‘‘NAVI VOL’’
‘‘Intercom Mute’’
(Models not equipped
with Navigation System)
(Models equipped with
Navigation System)
100
VOLUME Knob/Button Function
Audio Systems
Audio Systems
08/07/15 10:06:21 31MCA680 0107 
audio mode
indicator
NAVI mode
indicator
intercom mode
indicator
auto volume indicator
mute indicator
audio mode
indicator
intercom mode
indicator
clock display
radio preset
channel
radio station
stereo indicatorradio band
(Models equipped with Navigation System)
(Models not equipped with Navigation System)
clock display
ambience indicator
auto volume indicator
For USA
For Canada
mute indicator
auto select
indicator
audio mode
indicator
clock display
ambience indicator
auto volume indicatormute indicator
radio preset
channel
radio station
auto select
indicator
ambience indicator auto select indicator
radio preset
channel
stereo
indicator
NAVI mode
indicator
intercom mode
indicator
radio band
stereo
indicator
radio station
radio band
101
Display Locations
Audio Systems
Audio Systems
08/07/15 10:06:31 31MCA680 0108 
(Models equipped with Navigation System)
DISP button
For CanadaFor USA
102
Audio Systems
Audio Systems
Press the DISP button to toggle between the Multi Information Display (time,
audio, odo and trip), a Navi full screen map with the time, and a split screen
with the Multi information condensed in a bar below the map.
If you are not in the Navigation System when you turn the ignition switch OFF,
you will see the audio display when you turn the ignition switch ON again. If
you were in the system, you will see the system disclaimer with ENT
highlighted.
08/07/15 10:06:40 31MCA680 0109 
LEFT HANDLEBAR
TALK lever
(for accessory CB radio)
CB radio levers
(for accessory CB radio)
TUNE/DISC lever
VOLUME lever
MUTE button
CB button (for accessory CB radio)
AUDIO button
I-COM button
A. SEL button
CD button (for accessory CD changer)
VOLUME
knob/button
FM1 button
FM2 button
AM button
AUX button
WB button
MODE
knob/button
preset buttons
(Models not equipped with Navigation System)
103
Controls Locations
Audio Systems
Audio Systems
The CB and CD levers and buttons function when the Honda accessory CB
radio and/or CD changer are installed. For CB and CD operating instructions,
refer to the accessory manuals.
08/07/15 10:06:48 31MCA680 0110 
LEFT HANDLEBAR
MUTE button
CB radio levers
(for accessory CB radio)
AUDIO button
TUNE/DISC lever
I-COM button
CD button (for accessory CD changer)
VOLUME lever
CB button (for accessory CB radio)
NAVI button
VOLUME
knob/button
AM button
TALK lever
(for accessory
CB radio)
(Models equipped with Navigation System)
A.SEL button
WB
button
MODE
knob/button
AUX button
preset buttons
FM button XM button
For Canada only
104
Audio Systems
Audio Systems
For navigation system operating instructions, refer to the Navigation System
Manual.
The CB and CD levers and buttons function when the Honda accessory CB
radio and/or CD changer are installed. For CB and CD operating instructions,
refer to the accessory manuals.
08/07/15 10:06:55 31MCA680 0111 
audio
system
controls
front headset
terminal
rear headset terminal
tweeters rear speakers
front speaker
audio system controls
external amplifier
front speaker
radio antenna
(models equipped with
Premium Audio)
(models equipped with
Premium Audio)
(models equipped with
Premium Audio)
105
Audio Component Locations
Audio Systems
Audio Systems
08/07/15 10:07:01 31MCA680 0112 
AUDIO button AUDIO button
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
For USA
For Canada
106
System Control
Audio Systems
Audio Systems
To turn the audio system on push the AUDIO button.
CB and CD are optional equipment. They are only indicated if installed.
To turn the audio system off push and hold the AUDIO button.
08/07/15 10:07:10 31MCA680 0113 
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
For USA
For Canada
107
Switch Output
Audio Systems
Audio Systems
When the audio system is turned on, you can switch its output between Speaker
and Headset. (Headset is optional equipment.)
Pushing the AUDIO button switches the output.
08/07/15 10:07:20 31MCA680 0114 
VOLUME leverVOLUME lever
VOLUME knob/button VOLUME knob/button
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
108
VOLUME Control
Audio Systems
Audio Systems
To increase the volume push the VOLUME lever up or turn the
VOLUME knob/button clockwise.
push the VOLUME lever down or turn the
VOLUME knob/button counterclockwise.
To decrease the volume
To increase or decrease the volume rapidly push the VOLUME lever up or
down and hold it down.
(VOLUME level range: from 0 to 30)
08/07/15 10:07:29 31MCA680 0115 
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
MODE knob/button MODE knob/button
For USA
For Canada
109
Tone Control
Audio Systems
Audio Systems
The tone (Bass Treble) is automatically adjusted in accordance with the
vehicle speed.
To reduce bass
To emphasize bass
turn the MODE knob/button counterclockwise (Bass
control ranges from 6 down to 6.)
turn the MODE knob/button clockwise.
To select the Bass control, push the MODE knob/button until ‘‘BASS’’
(‘‘Bass’’) is displayed (page ). Then, within 5 seconds, change the bass
control.
Bass:
99
08/07/15 10:07:40 31MCA680 0116 
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
For USA
For Canada
110
Audio Systems
Audio Systems
Treble:
To select the Treble control, push the MODE knob/button until ‘‘TREBLE’’
(‘‘Treble’’) is displayed (page ). Then, within 5 seconds, change the treble
control.
To emphasize treble
To reduce treble turn the MODE knob/button counterclockwise.
(Treble level ranges from 6 down to 6.)
turn the MODE knob/button clockwise.
99
08/07/15 10:07:48 31MCA680 0117 
(Models equipped with
Navigation System)
(Models not equipped with
Navigation System)
MODE knob/button MODE knob/button
For USA
For Canada
111
Fader Control
Audio Systems
Audio Systems
To balance the sound between the front and rear speakers push the MODE
knob/button until ‘‘FADER’’ (‘‘Fader’’) is displayed (page ). Then, within 5
seconds, change the fader control. (The control range: F (front) and R (rear)
each have 9 segments.)
‘‘FADER’’ (‘‘Fader’’) can be shown on the display, but the Fader control does
not function properly without the rear speaker. The rear speaker is an optional
equipment for the models without the Premium Audio.
99
08/07/15 10:07:57 31MCA680 0118 
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
MODE knob/button MODE knob/button
For USA
For Canada
112
Ambience (AMB)
Audio Systems
Audio Systems
The ‘‘ambience’’ circuit blends and boosts certain frequencies from both
channels, for a ‘‘live performance’’ effect. AMB may be used for stereo
programs from the FM radio. However, the ambience circuit may make weak
FM stereo signals sound worse.
To use the circuit
To change the setting turn the MODE knob/button (There are three
settings: HI (High), LO (Low), OFF (Off).
push the MODE knob/button until ‘‘AMB’’
(‘‘Ambiance’’) is displayed (page ). Then,
within 5 seconds, change the ambience setting.
99
08/07/15 10:08:07 31MCA680 0119 
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
(Models equipped with Navigation System)
MODE knob/buttonMODE knob/button
For USA
For Canada
113
Beep Set
Audio Systems
Audio Systems
To use the circuit push the MODE knob/button until ‘‘BEEP’’
(‘‘Beep’’) is displayed (page ). Then, within 5
seconds, change the beep setting.
turn the MODE knob/button. (ON (On) or OFF
(Off))
To change the setting
At the same time, the Beep function of the Navigation System is also set.
99
08/07/15 10:08:17 31MCA680 0120 
(Models not equipped with Navigation System)
(Models equipped with Navigation System)
VOLUME knob/button
VOLUME knob/button
For USA
For Canada
114
Auto Volume Control (AVC)
Audio Systems
Audio Systems
AUTO VOL HS has three settings HI (High), LO (Low), and OFF (Off).
AUTO VOL SPK has four settings HI (High), MID (Mid), LO (Low), and
OFF (Off).
To automatically increase volume as the speed of the motorcycle increases. Push
the VOLUME knob/button until ‘‘AUTO VOL SPK’’ (‘‘Auto Speaker Vol’’) is
displayed (page ). To select the volume control of headset, push the
VOLUME knob/button until ‘‘AUTO VOL HS’’ (‘‘Auto Headset Vol’’) is
displayed (page ). Then, within 5 seconds, change the AVC setting.
100
100
08/07/15 10:08:28 31MCA680 0121 
LEFT HANDLEBAR
MUTE button
115
Muting
Audio Systems
Audio Systems
To instantly lower the radio’s volume so you may hear surrounding sounds more
clearly push the MUTE button.
The display will indicate ‘‘MUTE’’.
To restore the original volume push the MUTE button again to restore the
original volume.
08/07/15 10:08:34 31MCA680 0122 
radio antenna
116
Radio Antenna
AM/FM Radio
Audio Systems
To fold the AM/FM radio antenna, pull up on the knurled coupling.
08/07/15 10:08:38 31MCA680 0123 
STEREO indicator
FM2 button
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
AM buttonAM button
FM1 button FM button
(Models not equipped with Navigation System)
(Models equipped with Navigation System)
117
Select Band
AM/FM Radio
Audio Systems
To change to AM or FM when you are in the radio mode push the AM button,
FM1 button or FM2 button.
Push the FM button to switch to FM1/FM2.
Push the AM button to switch to AM/WB (USA only).
Push the AM button to listen to AM (Canada only).
Reception of a stereo signal is indicated when the STEREO indicator appears in
the display. (Stereo reception is available only for FM stereo broadcasts.) As FM
stereo reception becomes weaker, special circuits in the radio gradually blend
the sound toward mono to maintain some sound quality, even though the
STEREO indicator remains ON.
08/07/15 10:08:46 31MCA680 0124 
LEFT HANDLEBAR
TUNE/DISC lever
118
Select Station
AM/FM Radio
Audio Systems
To raise the radio frequency push the TUNE/DISC lever up.
To lower the radio frequency push the TUNE/DISC lever down.
To move up or down the radio frequencies in sequence, move the lever one click
at a time. The AM frequency display moves in 10 kHz steps. The FM frequency
moves in 0.2 kHz steps.
The SEEK function searches the band for a station with a strong signal. To
activate it, push the TUNE/DISC lever up or down and release it. The frequency
display will begin moving. Depending on which way you push the switch, the
system scans upward or downward from the current frequency.
It stops when it finds a station with a strong signal.
When the frequency display reaches either end, it transitions to the other end of
the band and continues in the same direction.
To reach a known frequency rapidly push the TUNE/DISC lever up or down
and continue to hold it down until you see the desired frequency.
08/07/15 10:08:54 31MCA680 0125 
FM1 button
A.SEL button
FM button
preset buttons preset buttons
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
AM button
FM2 button
AM button
A.SEL button
119
Preset Stations
AM/FM Radio
Audio Systems
You can store the frequencies of your favorite radio stations in the six preset
buttons. Each button will store one frequency on the AM band, and two
frequencies on the FM band.
Pick the Preset button you want for that station. Press the button and hold it.
Check that A.SEL is not turned on. If it is on, push the A.SEL button to turn it
off.
Select the desired band, AM or FM. FM1 and FM2 let you store two
frequencies with each Preset button.
Use the TUNE or SEEK function to tune the radio to a desired station.
Repeatsteps1to3tostoreatotalofsixstationsonAMandtwelveonFM.
Once a station’s frequency is stored, simply press and release the proper Preset
button to tune to it. The preset frequencies will be lost if your motorcycle’s
battery goes low (or dead) or is disconnected, or if the radio fuse is removed.
1.
2.
3.
4.
5.
08/07/15 10:09:03 31MCA680 0126 
A.SEL button
A.SEL button
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
preset buttons preset buttons
120
Auto Select
AM/FM Radio
Audio Systems
If you are traveling far from home and can no longer receive the stations you
preset, you can use the Auto Select feature to find stations in the local area.
To activate Auto Select, push the A.SEL button. A.SEL will appear in the
display, and the system will go into scan mode for several seconds.
It automatically scans both bands, looking for stations with strong signals. It
stores the frequencies of six AM stations and twelve FM stations in the preset
buttons (page ). You can then use the preset buttons to select those stations.
If you are in a remote area, Auto Select may not find six strong AM stations or
twelve strong FM stations. If this happens, you will see a ‘‘0’’ displayed when
you push any preset button that does not have a station stored.
With Auto Select on, you cannot manually store any frequencies in the preset
buttons. If you do not like the stations found by Auto Select, you can use the
TUNE and SEEK functions to find other stations.
Auto Select does not erase the frequencies that you preset previously. When you
return home, turn off Auto Select by pressing the A.SEL button. The preset
buttons will then select the frequencies you originally set.
119
08/07/15 10:09:11 31MCA680 0127 
(Models equipped with Navigation System)
XM button
121
Receiving Satellite Radio Service
Audio Systems
XM Radio (USA only)
www.xmradio.com
If your XM radio service has expired or you purchased your motorcycle from a
previous owner, you can listen to a sampling of the broadcasts available on XM
Satellite Radio. With the ignition switch in the ACCESSORY or the ON
position, press the XM button. A variety of music types and styles will play.
Your motorcycle is capable of receiving XM Satellite Radio anywhere in the
United States, except Hawaii and Alaska. XM is a registered trade mark of XM
Satellite Radio, Inc.
XM Satellite Radio receives signals from two satellites to produce clear, high-
quality digital reception. It offers many channels in several categories. Along
with a large selection of different types of music, XM Satellite Radio also
allows you to view channel and category selections in the audio display.
If you decide to purchase XM satellite radio service, contact XM Radio at
, or at 1-800-852-9696. You will need to give them your
Radio ID number, which may be found on XM Channel 0, and your credit card
number.
08/07/16 10:50:28 31MCA680 0128 
Radio ID number Radio ID number
122
Audio Systems
XM Radio (USA only)
www.xmradio.com
www.xmradio.com
To get your Radio ID number, push the TUNE/DISC lever until CH 0 appears in
the display under channel mode (Display channel 0 at only ALL Category
search mode) (page ) or choose Menu screen on the Setup/info menu,
highlight XM Info and press ENT.
Contact XM Radio at , or at 1-800-852-9696.
After you’ve registered with XM Radio, keep your audio system in the Satellite
Radio mode while you wait for activation. This should take about 30 minutes.
While waiting for activation, make sure your vehicle remains in an open area
with good reception. XM Radio will continue to send an activation signal to
your motorcycle for at least 3 hours from the activation request. If you miss that
window, simply log onto refresh with your Radio ID and
follow the steps to refresh the signal.
125
08/07/16 10:50:44 31MCA680 0129 
XM radio antenna
SSaatteelllliittee
SSiiggnnaall mmaayy bbee bblloocckkeedd bbyy
mmoouunnttaaiinnss oorr llaarrggee
oobbssttaacclleess ttoo tthhee ssoouutthh..
GGrroouunndd rreeppeeaatteerr
Si
gnal is weaker in these areas.
123
Audio Systems
XM Radio (USA only)
As required by the FCC:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The XM satellites are in orbit over the equator; therefore, objects south of the
vehicle may cause satellite reception interruptions. To help compensate for this,
ground-based repeaters are placed in major metropolitan areas.
Satellite signals are more likely to be blocked by tall buildings and mountains
the farther north you travel from the equator. Carrying large items on a travel
trunk can also block the signal.
Depending on where you ride, you may experience reception problems.
Interference can be caused by any of these conditions:
There may be other geographic situations, parking conditions, and also installing
metallic or metalized accessories near the windscreen could affect XM radio
reception.
Riding on the north side of an east/west mountain road.
Riding on the north side of a large commercial truck on an east/west road.
Riding in tunnels.
Riding on a road beside a vertical wall, steep cliff, or hill to the south of you.
Riding on the lower level of a multi-tiered road.
Riding on a single-lane road alongside dense trees taller than 50 ft. (15 m) to
the south of you.
08/07/15 10:09:38 31MCA680 0130 
−−−−
XM button
124
Operating the XM Radio
XM Radio Display Messages
Audio Systems
XM Radio (USA only)
To listen to XM satellite radio, turn the ignition switch to the ON or
ACCESSORY position, and push the XM button. The last channel you listened
to will show in the display.
Push the XM button to switch to XM1/XM2.
XM is loading the audio or program
information.
‘UPDATING’
The channel currently selected is no longer
broadcasting.
The encryption code is being updated. Wait
until the encryption code is fully updated.
Channels 0 and 1 should still work normally.
‘NO XM SIGNAL’ The signal is currently too weak. Move the
vehicle to an area away from tall buildings, and
with an unobstructed view of the southern
horizon.
The selected channel number does not exist, or
is not part of your subscription, or this channel
has no artist or title information at this time.
‘CHECK XM ANTENNA’ There is a problem with the XM antenna.
Please consult your dealer.
‘OFF AIR’
‘LOADING’
08/07/15 10:09:50 31MCA680 0131 
TUNE/DISC lever
XM Channel XM Category
125
Select Channel
Audio Systems
XM Radio (USA only)
To select channel from XM Channel, push the TUNE/DISC lever.
To select channel from XM Category, push and hold the TUNE/DISC lever then
select the category while XM Category is displaying.
Push the TUNE/DISC lever up or down and continue to hold it down until you
see the desired channel.
In the channel mode, you can select all of the available channels. In the category
mode, such as Jazz, Rock, Classical, etc., you can select all of the channels
within that category.
You may experience periods when XM radio does not transmit the artist’s name
and song title information. If this happens, there is nothing wrong with your
system.
08/07/15 10:09:56 31MCA680 0132 
XM button
preset buttons
126
Preset Channel
Audio Systems
XM Radio (USA only)
You can store the channels of your favorite up to 12 preset channels using the
six preset buttons. Each button stores one channel from the XM1 band and one
channel from the XM2 band.
Once a channel is stored, simply press and release the proper preset button to
tune to it. The preset channels will be lost if your motorcycle’s battery goes low
(or dead) or is disconnected, or if the radio fuse is removed.
PushtheXMbuttontoselectXM1orXM2.
Select the channel (page ).
Pick the Preset button you want for that channels. Press and hold the preset
button until you hear a beep.
Repeat steps 2 and 3 to store a total of six channel on each XM1 and XM2.
1.
2.
3.
4.
125
08/07/15 10:10:02 31MCA680 0133 
−−
LEFT HANDLEBAR
TUNE/DISC lever
WB button
preset buttons
(Models not equipped with Navigation System)
127
Weather Band (WB)
Weather Information
Audio Systems
To listen to the Weather Band push the WB button.
To cancel the Weather Band push another band button (AM, FM1 or FM2).
To select channels 1 6 push the desired preset button.
To select channel 7 push the TUNE/DISC lever up or down until channel 7 is
selected.
(The TUNE/DISC lever may be used to select any of the 7 channels. The lever
must be used to select channel 7.)
08/07/15 10:10:10 31MCA680 0134 
−−
LEFT HANDLEBAR
TUNE/DISC lever
WB button
AM button
preset buttons
(Models equipped with Navigation System)
For Canada
For USA
For CanadaFor USA
For Canada only
128
Weather Information
Audio Systems
TolistentotheWeatherBand pushtheAMbuttontoswitchAM/WB.
To cancel the Weather Band push the AM button again or another band
button (FM or XM).
To select channels 1 6 push the desired preset button.
To select channel 7 push the TUNE/DISC lever up or down until channel 7 is
selected.
(The TUNE/DISC lever may be used to select any of the 7 channels. The lever
must be used to select channel 7.)
To cancel the Weather Band push another band button (AM or FM).
To listen to the Weather Band push the WB button.
08/07/15 10:10:21 31MCA680 0135 
AUX button
AUX button
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
AUX indicator
129
Auxiliary (AUX) Input
Auxiliary Function
Audio Systems
Use this function to listen to other audio such as a portable CD player:
To turn the function on
To turn the function off push the AM, FM1, FM2, FM, or WB button.
The following functions operate the same as they do with the AM/FM radio:
Switch output, Tone control, Fader control, AMB, AVC, BEEP, Muting.
push the AUX button. (AUX appears on the
display.)
08/07/15 10:10:30 31MCA680 0136 
grommet A
wire harness connector
auxiliary input patch cord
fairing pocket
clips
clips
cover
130
Input Jack Setup
Auxiliary Function
Audio Systems
The auxiliary input jack connector is located under the left fairing pocket. To
use it:
Remove the auxiliary input patch cord from the owner’s manual pouch.
Plug the auxiliary input patch cord into the wire harness connector.
Open the left fairing pocket cover and remove the clips and grommet A.
Lift out the fairing pocket.
Attach a cloth to the cover and remove the cover with care using a flat-tip
screwdriver.
1.
2.
3.
4.
5.
08/07/15 10:10:38 31MCA680 0137 
grommet B
auxiliary input
patch cord
131
Auxiliary Function
Audio Systems
Some portable audio systems may pick up noise from the ignition.
Adjust the volume of the portable audio system so that it is about the same
level as the GL’s radio volume. If the volume of the portable audio system is
set too high, the sound coming out from the speakers or headset may be
distorted.
Install the grommet B to left fairing pocket.
Do not pull on the auxiliary cord as the wires could be damaged.
Route the auxiliary input patch cord through the hole in the bottom of the
fairing pocket.
6.
7.
08/07/15 10:10:44 31MCA680 0138 
front headset terminal rear headset terminal
I-COM buttonI-COM button
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
I-COM mode indicator
132
System Control
Intercom (I-COM) System
Audio Systems
Some local governments prohibit the use of a headset by the operator of a motor
vehicle. Always obey applicable laws and regulations.
The intercom system may be used to communicate with your passenger. (If you
want to use this system, you must have headsets.)
push the I-COM button. (I-COM appears on the
display.)
push and hold the I-COM button. (I-COM
disappears.)
To turn the system on
To turn the system off
08/07/15 10:10:54 31MCA680 0139 
VOLUME lever
VOLUME lever
(Models not equipped with Navigation System)
(Models equipped with Navigation System)
VOLUME knob/button MODE knob/button
MODE knob/buttonVOLUME knob/button
For USA
For Canada
133
VOLUME Control
Intercom (I-COM) System
Audio Systems
To select the Volume control, push the MODE knob/button until ‘‘INTERCOM
VOL’’ (‘‘Intercom’’) is displayed (page ). Then, within 5 seconds, change
the volume control.
To increase the volume
To decrease the volume
push the VOLUME lever up or turn the
VOLUME knob/button clockwise.
push the VOLUME lever down or turn the
VOLUME knob/button counterclockwise.
To increase or decrease the volume rapidly push the VOLUME lever up or
down and hold it down.
(VOLUME level range : from 0 to 20)
100
08/07/15 10:11:07 31MCA680 0140 
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
VOLUME knob/button VOLUME knob/button
For USA
For Canada
134
Intercom Muting
Intercom (I-COM) System
Audio Systems
The intercom mute system automatically lowers (does not silence) the music/
program volume when you speak through the intercom.
The sensitivity of the intercom microphone to your voice or ambient sound sets
the level at which the intercom system mutes the music/program volume.
To adjust this system push the VOLUME knob/button until ‘‘INTERCOM
MUTE’’ (‘‘Intercom Mute’’) is displayed (page ).
To increase microphone
sensitivity
turn the VOLUME knob/button clockwise.
To decrease microphone
sensitivity
turn the VOLUME knob/button
counterclockwise. (Intercom Mute control
range: from 0 to 20)
100
08/07/15 10:11:18 31MCA680 0141 
NAVI button
For USA
For Canada
For USA
For Canada
135
System Control
Switch Output
Navigation System
Audio Systems
To turn the Navi voice on with the Navigation System turned off push the
NAVI button.
To turn the Navi voice off with the Navigation System turned on push and
hold the NAVI button.
Push the NAVI button switches output.
When the navigation voice guidance is turned on, you can switch its output
between Speaker and Headset (optional equipment).
08/07/15 10:11:32 31MCA680 0142 
VOLUME lever
VOLUME knob/button
MODE knob/button
For Canada
For USA
136
Navi Volume Control
Navigation System
Audio Systems
To select the volume control, push the VOLUME knob/button until ‘‘NAVI
VOL’’ is displayed (page ). Then, within the 5 seconds, change the navigation
volume control.
To make the Navi volume louder than the audio volume push the VOLUME
lever up or turn the VOLUME knob/button clockwise.
To make the Navi volume quieter than the audio volume push the VOLUME
lever down or turn the VOLUME knob/button counterclockwise.
To increase or decrease the volume rapidly push the VOLUME lever up or
down and hold it down.
(NAVI VOLUME level ranges: from 5 down to 5)
100
08/07/15 10:11:41 31MCA680 0143 
137
Servicing Your Honda
Servicing Your Honda
Maintenance, replacement or repair of the emission control devices and
systems may be performed by any motorcycle repair establishment or
individual using parts that are ‘‘certified’’ to EPA standards.
Before You Service Your Honda
To help keep your motorcycle in good shape, this section includes a
Maintenance Schedule for required service, a list of periodic checks you should
perform at least once a month, and step-by-step instructions for specific
maintenance tasks. You’ll also find important safety precautions, information on
fuels and oils, and tips for keeping your Honda looking great.
(cont’d)
For information about the exhaust emission and noise emission requirements of
the U.S. Environmental Protection Agency (EPA), the California Air Resources
Board (CARB), and Environment Canada (EC), see page .
For information about replacing fuses, see page .
USA only
......................................................................The Importance of Maintenance .
..........................................................................................Maintenance Safety .
.......................................................................................Periodic Maintenance .
.....................................................................................Maintenance Schedule .
........................................................................................Maintenance Record .
.......................................................................Important Safety Precautions .
232
140
141
142
143
144
148
251
08/07/15 10:11:51 31MCA680 0144 
138
Servicing Your Honda
Servicing Your Honda
Service Preparations
Service Procedures
Fluids & Filters
Electrical
Chassis
Engine
................................................................Maintenance Component Locations .
............................................................................................................Tool Kit .
.................................................................................Owner’s Manual Storage .
.................................................................................................Cover Removal .
....................................................................................................Clip Removal .
...................................................................................................................Fuel .
...........................................................................................Engine Oil & Filter .
.............................................................................................................Coolant .
..........................................................................................Crankcase Breather .
..................................................................................................Final Drive Oil .
...................................................................................................Clutch System .
.......................................................................................................Spark Plugs .
........................................................................................................Suspension .
...............................................................................................................Brakes .
..................................................................................................................Tires .
.........................................................................................................Side Stand .
..............................................................................................................Battery .
..............................................................................................Appearance Care .
149
152
153
154
159
160
163
170
173
174
176
178
180
184
189
196
197
201
08/07/15 10:12:07 31MCA680 0145 
**
139
Servicing Your Honda
Servicing Your Honda
The following table summarizes the three types of inspections and servicing
recommendations for your motorcycle. Both the pre-ride inspection and the
scheduled maintenance at the recommended intervals are necessary to assure
safe and dependable performance. The periodic checks provide additional
confidence in your motorcycle’s performance.
more often if you ride frequently or long distances; or anytime you clean your
motorcycle
unless you have the proper tools and service data and are mechanically
qualified
47
143
144
Type of Inspection/
Service
Who Performs
Pre-ride Inspection
Periodic Maintenance
Maintenance Schedule
Refer to
page:
you
When Performed
before every ride
monthly
interval on schedule
you
your Honda
dealer
08/07/15 10:12:20 31MCA680 0146 
Improperly maintaining this
motorcycle or failing to correct a
problem before you ride can
causeacrashinwhichyoucan
be seriously hurt or killed.
Always follow the inspection
and maintenance
recommendations and
schedules in this owner’s
manual.
140
Servicing Your Honda
The Importance of Maintenance
Keeping your motorcycle well-maintained is absolutely essential to your safety.
It’s also a good way to protect your investment, get maximum performance,
avoid breakdowns, and have more fun. A properly maintained motorcycle will
also help to reduce air pollution.
Remember, proper maintenance is the owner’s responsibility. Be sure to inspect
your motorcycle before each ride, perform the periodic checks, and follow the
Maintenance Schedule in this section.
If your motorcycle overturns or is involved in a crash, be sure your Honda
dealer inspects all major parts, even if you are able to make some of the repairs
yourself.
08/07/15 10:12:25 31MCA680 0147 
Failure to properly follow
maintenance instructions and
precautions can cause you to
be seriously hurt or killed.
Always follow the procedures
and precautions in this owner’s
manual.
141
Servicing Your Honda
Maintenance Safety
This section includes instructions on how to perform some important
maintenance tasks. If you have basic mechanical skills, you can perform many
of these tasks with the tools provided with your motorcycle.
Other tasks that are more difficult and require special tools are best performed
by professionals. Wheel removal should normally be handled only by a Honda
technician or other qualified mechanic. Instructions are included in this manual
only to assist in emergency service.
Some of the most important safety precautions follow. However, we cannot
warn you of every conceivable hazard that can arise in performing maintenance.
Only you can decide whether or not you should perform a given task.
08/07/15 10:12:30 31MCA680 0148 
142
Important Safety Precautions
Carbon monoxide poisoning from engine exhaust.
Burns from hot motorcycle parts.
Injury from moving parts.
Servicing Your Honda
Maintenance Safety
Make sure the engine is off before you begin any maintenance or repairs.
This will help eliminate several potential hazards:
Be sure there is
adequate ventilation whenever you operate the engine.
Let the engine and exhaust system cool
before touching.
Do not run the engine unless instructed to do so.
Read the instructions before you begin, and make sure you have the tools and
skills required.
To reduce the possibility of a fire or explosion, be careful when working
around gasoline. Use only non-flammable solvent, not gasoline, to clean parts.
Keep cigarettes, sparks, and flames away from all fuel-related parts.
Remember that your Honda dealer knows your motorcycle best and is fully
equipped to maintain and repair it. To ensure the best quality and reliability, use
only new Honda Genuine Parts or their equivalents for repair and replacement.
If you have the tools and skills required for additional maintenance jobs, you
can purchase an official Honda Service Manual (page ).
To help prevent the motorcycle from falling over, park it on a firm, level
surface, using the center stand.
258
08/07/15 10:12:36 31MCA680 0149 
143
Servicing Your Honda
Periodic Maintenance
Check the odometer reading and perform any scheduled maintenance checks
that are needed (page ). Remember, more frequent checks may be needed for
riding in severe conditions.
Fluids
Make sure the headlight, brakelight, taillight, and turn
signals are working properly.
In addition to the regularly scheduled maintenance (page ) and daily pre-ride
inspection (page ), consider performing the periodic checks on the following
page at least once a month, even if you haven’t ridden your motorcycle, or as
often as once a week if you ride frequently or for long distances. It’s a good idea
to perform this maintenance any time you clean your motorcycle.
Check the levels of the engine oil (page ), coolant
(page ), brake fluid (page ), clutch fluid
(page ), and final drive oil (page ). Add the
correct fluid as necessary, and investigate the cause of
any low fluid level.
Lights
Check the air pressure with a gauge and add air if needed
(page ).
Examine the tread for wear (page ).
Look closely for nails, embedded objects, cuts, and other
types of damage (page ). Rotate the rear wheel so
you can inspect the entire surface.
Check the condition of the wheels.
Fuses Make sure you have a full supply of spare fuses.
Nuts & Bolts Check the major fasteners and tighten as needed.
Tires
&
Wheels
47
144
144
190
191
191
166
171 185
177 174
08/07/15 10:12:46 31MCA680 0150 
144
Servicing Your Honda
Maintenance Schedule
The required Maintenance Schedule that follows specifies how often you should
have your motorcycle serviced, and what things need attention. It is essential to
have your motorcycle serviced as scheduled to maintain safe, dependable
performance and proper emission control.
The service intervals in this Maintenance Schedule are based on average riding
conditions. Some items will need more frequent service if you ride in unusually
wet or dusty areas or at full throttle. Consult your Honda dealer for
recommendations applicable to your individual needs and use.
Some items in the Maintenance Schedule can be performed with basic
mechanical skills and hand tools. Procedures for these items are provided in this
manual. Other items involve more extensive procedures and may require special
training, tools, and equipment. We recommend that you have your Honda dealer
perform these tasks unless you have advanced mechanical skills and the required
tools and equipment. Procedures for such items in this schedule are provided in
an official Honda Service Manual available for purchase (page ).258
08/07/15 10:12:51 31MCA680 0151 
**
145
Servicing Your Honda
Maintenance Schedule
Summary of Maintenance Schedule Notes
& Procedures:
If you do not feel capable of performing a given task or need assistance,
remember that your Honda dealer knows your motorcycle best and is fully
equipped to maintain and repair it. If you decide to do your own maintenance,
use only Honda Genuine Parts or their equivalents for repair or replacement to
ensure the best quality and reliability.
Perform the pre-ride inspection (page ) and owner maintenance (page ) at
each scheduled maintenance period.
Service more frequently if the motorcycle is ridden in unusually wet or dusty
areas.
Service more frequently if the motorcycle is ridden often at full throttle or in
the rain.
Service more frequently if noisy.
At higher odometer readings, repeat at the frequency interval established here.
Should be serviced by your Honda dealer, unless you have the proper tools
and service data and are mechanically qualified. Refer to the official Honda
Service Manual (page ).
In the interest of safety, we recommend these items be serviced only by your
Honda dealer.
Replace every 2 years, or at indicated odometer interval, whichever comes
first. Replacement requires mechanical skill.
The following items require some mechanical knowledge. Certain items
(particularly those marked and ) may require more technical information
and tools. Consult your Honda dealer.
Replace at 4,000 mi (6,400 km) or 6 months, then every 8,000 mi (12,800 km)
or 12 months.
I: inspect and clean, adjust, lubricate,
or replace, if necessary
C: clean
A: adjust
L: lubricate
R: replace
Maintenance Procedures:
1.
2.
3.
4.
5.
NOTES:
47
6.
146
258
08/07/15 10:13:03 31MCA680 0152 
×
×
1,000 mi
1,000 km
NOTE
2
3
4
6
5
4
6.4
C
R
R
8
12.8
I
I
C
I
I
I
12
19.2
R
C
R
R
I
16
25.6
I
I
C
I
I
I
20
32.0
C
R
R
24
38.4
I
I
R
C
R
I
I
I
FUEL LINE
THROTTLE OPERATION
AIR CLEANER
CRANKCASE BREATHER
SPARK PLUGS
VALVE CLEARANCE
ENGINE OIL
ENGINE OIL FILTER
RADIATOR COOLANT
COOLING SYSTEM
SECONDARY AIR SUPPLY
SYSTEM
EVAPORATIVE EMISSION
CONTROL SYSTEM
Refer to
page
173
178
163
167
170
FREQUENCY
ITEM
EVERY 16,000 mi (25,600 km) R
EVERY 32,000 mi (51,200 km) I
ODOMETER READING (Note 1)
EMISSIONS-RELATED ITEMS
146
Servicing Your Honda
Maintenance Schedule
Should be serviced by your Honda dealer, unless you have the proper tools and service data
and are mechanically qualified. Refer to the official Honda Service Manual (page ).258
08/07/15 10:13:13 31MCA680 0153 
×
×
1,000 mi
1,000 km
NOTE
5
5
4
6.4
I
I
I
8
12.8
I
I
I
I
I
I
I
I
I
I
I
I
I
I
12
19.2
R
I
R
16
25.6
I
I
I
I
I
I
I
I
I
I
I
I
I
I
20
32.0
I
I
I
24
38.4
R
R
I
I
I
I
I
R
I
I
I
I
I
I
FINAL DRIVE OIL
BRAKE FLUID
BRAKE PADS WEAR
BRAKE SYSTEM
BRAKELIGHT SWITCH
HEADLIGHT AIM
CLUTCH SYSTEM
CLUTCH FLUID
REVERSE OPERATION
SIDE STAND
SUSPENSION
NUTS, BOLTS,
FASTENERS
WHEELS/TIRES
STEERING HEAD
BEARINGS
Refer to
page
174
185
187
188
176
177
196
FREQUENCY
ITEM
ODOMETER READING (Note 1)
NON-EMISSIONS-RELATED ITEMS
147
Servicing Your Honda
Maintenance Schedule
In the interest of safety, we recommend these items be serviced only by your Honda dealer.
Should be serviced by your Honda dealer, unless you have the proper tools and service data
and are mechanically qualified. Refer to the official Honda Service Manual (page ).258
08/07/15 10:13:22 31MCA680 0154 
148
Servicing Your Honda
Maintenance Record
Miles
(km)
Odometer Date Performed By: Notes
Keeping an accurate maintenance record will help ensure that your motorcycle
is properly maintained. Retain detailed receipts to verify the maintenance was
performed. If the motorcycle is sold, these receipts should be transferred with
the motorcycle to the new owner. Make sure whoever performs the maintenance
completes this record. All scheduled maintenance is considered a normal owner
operating cost and will be charged for by your dealer. Use the space under Notes
to record anything you want to remind yourself about or mention to your dealer.
4,000
(6,400)
8,000
(12,000)
12,000
(19,200)
16,000
(25,600)
20,000
(32,000)
24,000
(38,400)
28,000
(44,800)
32,000
(51,200)
36,000
(57,600)
40,000
(64,000)
44,000
(70,400)
48,000
(76,800)
52,000
(83,200)
08/07/15 10:13:30 31MCA680 0155 
clutch fluid reservoir front brake fluid reservoir
clutch lever
fuel fill cap
front brake lever
throttle grip
rear suspension spring pre-load adjustment switch
149
Servicing Your Honda
Maintenance Component Locations
08/07/15 10:13:34 31MCA680 0156 
rear brake fluid reservoir
rear brake caliper
front brake caliper
final drive gear oil filler cap
engine oil filler cap/dipstick
final drive gear
oil drain bolt
rear brake pedal
spark plugs
150
Servicing Your Honda
Maintenance Component Locations
08/07/15 10:13:39 31MCA680 0157 
front brake caliper
fuse box
battery
crankcase breather tube
spark plugs
engine oil filter
engine oil drain bolt
main fuse (A, B)
tool kit
owner’s manual
coolant reserve tank cap
151
Servicing Your Honda
Maintenance Component Locations
08/07/15 10:13:44 31MCA680 0158 
LEFT SIDE
tool band
tool kit
left saddlebag
152
Servicing Your Honda
Tool Kit
The tool kit is located in the left saddlebag (page ).
An optional, larger tool kit may be available. Check with your Honda dealer’s
parts department.
52
08/07/15 10:13:49 31MCA680 0159 
LEFT SIDE
left saddlebag
owner’s manual
153
Servicing Your Honda
Owner’s Manual Storage
Your motorcycle provides storage for the owner’s manual so you’ll have it with
you for easy reference. Store your owner’s manual (and other documents) in the
plastic storage bag in the left saddlebag (page ).
For models equipped with Navigation System:
Store your Navigation System Manual with your owner’s manual.
For models equipped with Airbag:
Store your Owner’s Manual Airbag Supplement and Navigation System Manual
with your owner’s manual.
Be careful not to flood this area when washing your motorcycle.
52
08/07/15 10:13:56 31MCA680 0160 
front lower cover
side cover
engine side cover
cylinder head side cover
154
Servicing Your Honda
Cover Removal
Safety PrecautionsRefer to on page .
Left side shown; right side similar
142
08/07/15 10:14:01 31MCA680 0161 
LEFT SIDE
side cover
prongs
grommets
155
Side Cover Removal
Servicing Your Honda
Cover Removal
Safety Precautions
Failure to use extreme care removing or installing the side covers may damage
the side cover hooks.
Refer to on page .
The left side cover must be removed for battery and fuse maintenance.
Removal
Carefully pull the side cover out until the prongs are clear of the frame
grommets.
Remove the side cover.
Installation
Insert the top edge of the side cover under the seat.
Position the side cover so the prongs on the inside of the cover are lined up
above their securing grommets.
Push the cover in place.
1.
2.
1.
2.
3.
142
08/07/15 10:14:15 31MCA680 0162 
LEFT SIDE
grommet
engine side cover
prong
tab
156
Engine Side Cover Removal
Servicing Your Honda
Cover Removal
Safety Precautions
Failure to use extreme care removing or installing the side covers may damage
the side cover hooks.
Refer to on page .
The left engine side cover must be removed for coolant maintenance.
The right engine side cover must be removed for engine oil and rear brake fluid
maintenance.
Removal
Installation
Installation can be done in the reverse order of removal.
Carefully slide the engine side cover to the rear until the hook is clear of the
tab in the hole of the engine side cover.
Carefully pull the rear of the engine side cover out until the prongs are clear
of their securing grommets.
1.
2.
142
08/07/15 10:14:24 31MCA680 0163 
LEFT SIDE
bolt
rubber plug
cylinder head side cover
157
Cylinder Head Side Cover Removal
Servicing Your Honda
Cover Removal
Safety PrecautionsRefer to on page .
Both cylinder head side covers must be removed for spark plug maintenance.
The left cylinder head side cover must be removed for crankcase breather
maintenance.
Removal
Installation
Installation can be done in the reverse order of removal.
Remove the rubber plugs.
Remove the bolts.
1.
2.
142
08/07/15 10:14:33 31MCA680 0164 
bolt
clip
FRONT
front lower cover
158
Front Lower Cover Removal
Servicing Your Honda
Cover Removal
Safety PrecautionsRefer to on page .
Installation can be done in the reverse order of removal.
Installation
The front lower cover must be removed for engine oil maintenance.
Remove the clips.
Remove the bolts.
Removal
1.
2.
142
08/07/15 10:14:41 31MCA680 0165 
159
Clip Removal
Servicing Your Honda
Removal
Press down on the center pin to release the lock.
Pull the clip out of the hole.
Installation
Push the bottom of the pin.
Insert the clip into the hole.
Lightly press down on the center pin to lock the clip.
1.
2.
1.
2.
3.
1. 2.
1.
2. 3.
08/07/15 10:14:49 31MCA680 0166 
unleaded
86 (or higher)
type
pump octane number
160
Fuel Recommendation
Fuel
Servicing Your Honda
Safety PrecautionsRefer to on page .
We recommend that you use unleaded fuel because it produces fewer engine
deposits and extends the life of exhaust system components.
Your engine is designed to use any gasoline that has a pump octane number of
86 or higher. Gasoline pumps at service stations normally display the pump
octane number. For information on the use of oxygenated fuels, see page .
Use of lower octane gasoline can cause persistent ‘‘pinging’’ or ‘‘spark knock’’
(a loud rapping noise) which, if severe, can lead to engine damage. Light
pinging experienced while operating under a heavy load, such as climbing a hill,
is no cause for concern.
If pinging or spark knock occurs at a steady engine speed under normal load,
change brands of gasoline. If pinging or spark knock persists, consult your
Honda dealer.
The use of leaded gas will damage the catalytic converters.
142
256
08/07/15 10:14:58 31MCA680 0167 
6.6 US gal (25 )
ignition key
fuel fill compartment
fuel fill cap
161
Fuel Capacity
Refueling Procedure
Fuel
Servicing Your Honda
Safety Precautions
Never use stale or contaminated gasoline or an oil/gasoline mixture. Avoid
getting dirt, dust, or water in the fuel tank.
Fuel tank capacity, including reserve:
Refer to on page .
The tank should be refilled as soon as possible when the fuel gauge needle
enters the red band.
Insert the ignition key in the fuel fill compartment and turn it clockwise.
Open the fuel fill compartment.
Turn the fuel fill cap counterclockwise and remove it.
(cont’d)
1.
2.
3.
142
08/07/15 10:15:07 31MCA680 0168 
Gasoline is highly flammable
and explosive. You can be
burned or seriously injured
when handling fuel.
Stop the engine and keep
heat, sparks and flame away.
Handle fuel only outdoors.
Wipe up spills immediately.
filler neck
162
Fuel
Servicing Your Honda
Add fuel until the level reaches the bottom of the filler neck.
Avoid overfilling the tank. There should be no fuel in the filler neck.
After refueling, be sure to tighten the fuel fill cap firmly by turning it
clockwise until it clicks.
Close the fuel fill compartment.
Remove the key from the fuel fill compartment.
4.
5.
6.
7.
08/07/15 10:15:13 31MCA680 0169 
163
Engine Oil & Filter
Servicing Your Honda
Engine oil quality is a major factor that affects both the performance and the
service life of the engine.
Using the proper oil (page ) and filter, and regularly checking, adding, and
changing oil will help extend your engine’s life. Even the best oil wears out.
Changing oil helps get rid of dirt and deposits in the engine. Operating the
engine with old or dirty oil can damage your engine. Running the engine with
insufficient oil can cause serious damage to the engine and transmission.
Change the engine oil as specified in the maintenance schedule on page .
When running in very dusty conditions, oil changes should be performed more
frequently than specified in the maintenance schedule.
164
146
08/07/15 10:15:19 31MCA680 0170 
SG or higher except oils labeled as energy
conserving on the circular API service label
MA
Pro Honda GN4 4-stroke oil (USA &
Canada), or Honda 4-stroke oil (Canada
only), or an equivalent motorcycle oil.
SAE 10W-30
suggested oil
OKNOT RECOMMENDED
API classification
viscosity (weight)
JASO T 903 standard
164
Oil Recommendation
Engine Oil & Filter
Servicing Your Honda
Your motorcycle does not need oil additives. Use the recommended oil.
Do not use oils with graphite or molybdenum additives. They may
adversely affect clutch operation.
Do not use API SH or higher oils displaying a circular API ‘‘energy
conserving’’ service label on the container. They may affect lubrication
and clutch performance.
Do not use non-detergent, vegetable, or castor based racing oils.
Suggested oils are equal in performance to SJ oils that are not labeled as
energy conserving on the circular API service label.
08/07/15 10:15:31 31MCA680 0171 
oil classification
code number of the sales
company of the oil
165
Engine Oil & Filter
Servicing Your Honda
Other viscosities shown in the following chart may be used when the average
temperature in your riding area is within the indicated range.
JASO T 903 standard
The JASO T 903 standard is an index for engine oils for 4-stroke motorcycle
engines.
There are two classes: MA and MB.
Oil conforming to the standard is labeled on the oil container. For example, the
following label shows the MA classification.
08/07/15 10:15:38 31MCA680 0172 
RIGHT SIDE
oil filler cap/dipstick
lower level mark
upper level mark
166
Checking & Adding Oil
Engine Oil & Filter
Servicing Your Honda
Safety PrecautionsRefer to on page .
Remove the right engine side cover (page ).
Start the engine and let it idle for 3 5 minutes. Make sure the low oil
pressure indicator goes off. If the indicator remains on, stop the engine
immediately.
Stop the engine and wait 2 3 minutes.
Remove the oil filler cap/dipstick and wipe it clean.
If the oil is at or near the upper level mark you do not have to add oil.
If the oil is below or near the lower level mark add the recommended oil
until it reaches the upper level mark. (Do not overfill.)
Reinstall the oil filler cap/dipstick.
Reinstall the right engine side cover.
Check for oil leaks.
Park your motorcycle on its center stand on a firm, level surface.
Insert the oil filler cap/dipstick until it seats, but don’t screw it in.
Remove the oil filler cap/dipstick and check the oil level.
9.
8.
7.
6.
5.
4.
3.
2.
1.
10.
142
156
08/07/15 10:15:50 31MCA680 0173 
FRONT, UNDER ENGINE
sealing washer
engine oil drain bolt
167
Changing Engine Oil & Filter
Engine Oil & Filter
Servicing Your Honda
Safety Precautions
Using the wrong oil filter may result in leaks or engine damage.
Drain the Engine Oil:
Refer to on page .
Your motorcycle’s oil filter has very specific performance requirements. Use a
new Honda Genuine oil filter or a filter of equal quality specified for your
model.
This procedure requires mechanical skill and professional tools such as a torque
wrench and oil filter wrench, as well as a means for disposing of the drained
fluid (page ). If you do not have the skills or the tools, see your Honda
dealer.
Park your motorcycle on its center stand on a firm, level surface.
If the engine is cold, start it and let it idle for 3 5 minutes. Turn the engine
off. Wait 2 3 minutes for the oil to settle.
Place a drain pan under the engine oil drain bolt.
Remove the front lower cover (page ).
To drain the oil, remove the oil filler cap/dipstick, engine oil drain bolt, and
sealing washer.
(cont’d)
1.
2.
3.
4.
5.
142
158
201
08/07/15 10:16:02 31MCA680 0174 
19 lbf·ft (26 N·m , 2.7 kgf·m)
25 lbf·ft (34 N·m , 3.5 kgf·m)
LEFT FRONT, UNDER ENGINE
oil filter oil filterrubber seal
168
Engine Oil & Filter
Servicing Your Honda
Install a New Oil Filter:
Improper disposal of drained fluids is harmful to the environment.
Pour the drained oil into a suitable container and dispose of it in an approved
manner (page ).
Apply a thin coat of engine oil to the rubber seal of a new oil filter.
Remove the oil filter with a filter wrench and let the remaining oil drain out.
Discard the oil filter in an approved manner (page ).
Install the new oil filter and tighten it by hand.
Using an oil filter wrench attachment and a torque wrench, tighten the new oil
filter to the specified torque:
Check the condition of the sealing washer on the engine oil drain bolt.
Replace the washer every other time the oil is changed.
Install the engine oil drain bolt and tighten it to the specified torque:
6.
7.
8.
9.
10.
11.
211
211
08/07/15 10:16:12 31MCA680 0175 
3.9 US qt (3.7
)
169
Engine Oil & Filter
Servicing Your Honda
Add Engine Oil:
Fill the crankcase with the recommended oil (page ), approximately:
Install the oil filler cap/dipstick securely.
Check that there are no oil leaks.
If a torque wrench is not used for installation, see your Honda dealer as soon as
possible to verify proper assembly.
Check that the oil level is at upper level mark on the dipstick (page ).
Start the engine and let it idle for 3 5 minutes.
Stop the engine and wait 2 3 minutes.
12.
13.
14.
15.
16.
17.
164
166
08/07/15 10:16:20 31MCA680 0176 
170
Coolant Recommendation
Coolant
Servicing Your Honda
Using coolant with silicate inhibitors may cause premature wear of water pump
seals or blockage of radiator passages. Using tap water may cause engine
damage.
Your motorcycle’s liquid cooling system dissipates engine heat through the
coolant jacket that surrounds the cylinder and cylinder head.
Maintaining the coolant will allow the cooling system to work properly and
prevent freezing, overheating, and corrosion.
Use Pro Honda HP coolant or an equivalent high quality ethylene glycol
antifreeze containing corrosion protection inhibitors specifically recommended
for use in aluminum engines. Check the antifreeze container label.
Use only distilled water as a part of the coolant solution. Water that is high in
mineral content or salt may be harmful to the aluminum engine.
The factory provides a 50/50 solution of antifreeze and water in this motorcycle.
This coolant solution is recommended for most operating temperatures and
provides good corrosion protection.
Decreasing the concentration of antifreeze to less than 40% will not provide
proper corrosion protection.
Increasing the concentration of antifreeze is not recommended because it
decreases cooling system performance. Higher concentrations of antifreeze (up
to 60%) should only be used to provide additional protection against freezing.
Check the cooling system frequently during freezing weather.
08/07/15 10:16:28 31MCA680 0177 
LEFT SIDE
upper level
lower level
reserve tank cap/dipstick
171
Checking & Adding Coolant
Coolant
Servicing Your Honda
Safety PrecautionsRefer to on page .
If the reserve tank is empty, or if coolant loss is excessive, check for leaks
and see your Honda dealer for repair.
Remove the left engine side cover (page ).
Reinstall the left engine side cover.
Always add coolant to the reserve tank. Do not attempt to add coolant by
removing the radiator cap.
With the engine at normal operating temperature, remove the reserve tank
cap/dipstick and check the coolant level.
Add coolant to the reserve tank as required to bring the coolant level to the
upper level mark.
1.
2.
3.
4.
142
156
08/07/15 10:16:37 31MCA680 0178 
Removing the radiator cap while
the engine is hot can cause the
coolant to spray out, seriously
scalding you.
Always let the engine and
radiator cool down before
removing the radiator cap.
172
Coolant Replacement
Coolant
Servicing Your Honda
Safety Precautions
You & the Environment,
Improper disposal of drained fluids is harmful to the environment.
Refer to on page .
Coolant should be replaced by your Honda dealer, unless you have the proper
tools and service data and are mechanically qualified. Refer to the official
Honda Service Manual (page ).
To properly dispose of drained coolant, refer to
page .
142
258
211
08/07/15 10:16:44 31MCA680 0179 
LEFT SIDE
crankcase breather tube plug
173
Draining
Crankcase Breather
Servicing Your Honda
Safety PrecautionsRefer to on page .
Service the crankcase breather more frequently if your motorcycle is ridden in
the rain or often at full throttle. Service the breather if you can see deposits in
the transparent section of the drain tube.
Place a drain pan under the crankcase breather tube plug.
Remove the left cylinder head side cover (page ).
Remove the plug to drain the deposits in the tube.
Reinstall the crankcase breather tube plug.
Reinstall the left cylinder head side cover.
1.
2.
3.
4.
5.
142
157
08/07/15 10:16:51 31MCA680 0180 
type
viscosity (weight) SAE 80
hypoid gear oil
oil filler cap
lower edge
RIGHT REAR
174
Checking & Adding Oil
Oil Recommendation
Final Drive Oil
Servicing Your Honda
Safety Precautions
Place the motorcycle on its center stand on a firm, level surface.
Remove the oil filler cap.
Check the oil level. It should be flush with the lower edge of the oil filler hole.
If the level is low, check for oil leaks. Add the recommended oil through the
oil filler hole until it reaches the lower edge of the opening.
Install the oil filler cap.
Refer to on page .
1.
2.
3.
4.
5.
142
08/07/15 10:17:01 31MCA680 0181 
4.1 US oz (120 cm )
15 lbf·ft (20 N·m , 2.0 kgf·m)
RIGHT REAR
oil filler cap
drain bolt
lower edge
sealing washer
175
Changing Oil
Final Drive Oil
Servicing Your Honda
Safety Precautions
Improper disposal of drained fluids is harmful to the environment.
Refer to on page .
Install the oil filler cap.
Make sure the final drive oil level is at the lower edge of the oil filler
inspection hole.
Fill the final drive with the recommended oil:
Change the oil with the final drive at normal operating temperature to assure
complete and rapid draining.
Place the motorcycle on its center stand on a firm, level surface.
Place a drain pan under the drain bolt.
Remove the oil filler cap, drain bolt and sealing washer.
After the oil has completely drained, check that the sealing washer is in good
condition. Reinstall the drain bolt with its sealing washer (or a new washer, if
necessary) and tighten it to the specified torque:
Pour the drained oil into a suitable container and dispose of it in an approved
manner (page ).
1.
2.
3.
4.
5.
6.
7.
142
211
08/07/15 10:17:13 31MCA680 0182 
LEFT HANDLEBAR
adjuster dial
index mark
clutch lever
176
Clutch Lever Adjustment
Clutch System
Servicing Your Honda
Safety Precautions
Your motorcycle has a hydraulically-actuated clutch. There are no adjustments
to perform, but the clutch system must be inspected periodically for fluid level
and leakage.
Turn the adjuster dial while pushing the clutch lever forward.
Align the index mark on the clutch lever with the numbers on the adjuster dial.
Start the engine, pull the clutch lever in, and shift into gear. Make sure the
engine does not stall and the motorcycle does not creep. Gradually release the
clutch lever and open the throttle. Your motorcycle should move smoothly
and accelerate gradually.
If the motorcycle creeps or stalls when shifted into gear, or if the clutch slips,
causing acceleration to lag behind engine speed, there is probably air in the
clutch system. See your Honda dealer to have the air bled out of the system.
Refer to on page .
The distance between the tip of the clutch lever and the grip may be adjusted.
1.
2.
3.
142
08/07/15 10:17:22 31MCA680 0183 
LEFT HANDLEBAR
LOWER level mark
177
Fluid Level Inspection
Other Inspections
Clutch System
Servicing Your Honda
Safety PrecautionsRefer to on page .
Check that the fluid level is above the LOWER level mark. If the fluid level is
below the LOWER level mark, it indicates fluid leakage. See your Honda dealer
for repair.
Make sure there are no fluid leaks.
Check for deterioration or cracks in the hose and fittings.
Check that the clutch lever assembly is positioned properly and the securing
bolts are tight.
142
08/07/15 10:17:30 31MCA680 0184 
BKR6E-11 (NGK)
BKR5E-11 (NGK)
BKR7E-11 (NGK)
K20PR-U11 (DENSO)
K16PR-U11 (DENSO)
K22PR-U11 (DENSO)
or
or
or
standard spark
plug
for cold climate
(below 5°C, 41°F)
for extended high
speed riding
spark plug wrench
spark plug cap
178
Spark Plug Recommendation
Spark Plug Inspection & Replacement
Spark Plugs
Servicing Your Honda
Using spark plugs with an improper heat range can cause engine damage.
Safety Precautions
Use only the recommended type of spark plugs in the recommended heat range.
Refer to on page .
Remove the left and right cylinder head side cover (page ).
Clean any dirt from around the spark plug bases.
Using a spark plug wrench provided in the tool kit, remove the spark plugs.
Disconnect the spark plug caps. Take care to avoid damaging the spark plug
wire when disconnecting the caps.
1.
2.
3.
4.
142
157
08/07/15 10:17:43 31MCA680 0185 
−−0.039 0.043 in (1.00 1.10 mm)
spark plug gap
side electrode
179
Spark Plugs
Servicing Your Honda
An improperly tightened spark plug can damage the engine. If a plug is too
loose, a piston may be damaged. If a plug is too tight, the threads may be
damaged.
Inspect the electrodes and center porcelain for deposits, corrosion, or carbon
fouling. If the corrosion or deposits are heavy, replace the plug. Clean a
carbon or wet-fouled plug with a plug cleaner, if available, or a wire brush.
Check the spark plug gap using a wire-type feeler gauge. If adjustment is
necessary, bend the side electrode carefully.
The gap should be:
First, tighten the plug:
NGK: turn after it seats.
DENSO: turn after it seats.
Then loosen the plug.
Next, tighten the plug again:
1/8 turn after it seats.
If installing a new plug, tighten it twice to prevent loosening:
If the old plug is good:
1/8 turn after it seats.
Reinstall the left and right cylinder head side covers.
Reinstall the spark plug caps. Take care to avoid pinching any cables or wires.
Tighten each spark plug:
With the plug washers attached, install the spark plugs in by hand to prevent
cross-threading.
1/2
3/4
a)
c)
b)
5.
6.
7.
8.
9.
10.
08/07/15 10:17:54 31MCA680 0186 
180
Rear Suspension Adjustment
Rear Suspension Spring Pre-load Adjustment
Suspension
Servicing Your Honda
Your front and rear suspension systems use springs and hydraulic damping
devices that suspend your weight and most of the weight of your motorcycle.
The spring pre-load for your rear suspension system adjusts the amount of force
required to begin compression of the spring.
The oil damper systems hydraulically control the natural compression and
rebound of the suspension springs so that traction and comfort are maintained as
the wheels ride over road surfaces.
Lower spring pre-load provides a softer ride and is usually preferred for light
loads and smooth roads. Higher spring pre-load provides a firmer ride and is
recommended for heavy loads, rough road conditions, and faster, more
challenging riding.
The rear suspension can be adjusted for rider (and passenger) weight and riding
conditions by changing the spring pre-load.
Do not attempt to disassemble, service, or dispose of the damper; see your
Honda dealer. The instructions found in this owner’s manual are limited to
adjustments of the shock assembly only.
Consider adjusting your rear suspension pre-load whenever you change your
normal load, when adding or subtracting a passenger, cargo, or accessories, or
when the road or riding conditions change.
The way you ride your motorcycle and the type of ride you want to experience
can also influence your suspension needs.
This rear suspension spring pre-load adjustment system functions only when the
ignition switch is ON or ACC, your motorcycle is stopped, and the transmission
is in neutral. (When the reverse indicator is ON, the system will not function.)
Rear suspension spring pre-load can be easily increased or decreased using the
rear suspension spring pre-load adjustment switch on the left fairing panel. Then
you can confirm the pre-load position with the multi information display.
08/07/15 10:18:03 31MCA680 0187 
rear suspension spring pre-load
adjustment switch
MEMO button
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
For USA
For USA
For Canada
For Canada
181
Suspension
Servicing Your Honda
Adjustment
The rear suspension spring pre-load adjustment system has 26 positions (from
0 to 25) for different road or riding conditions. (Standard position is 0.)
Place the motorcycle on its center stand on a firm, level surface. To prevent
discharging the battery, make sure the audio system and other electrical
accessories are off.
Turn the ignition switch to ON or ACC.
Push the DOWN or UP side of rear suspension spring pre-load adjustment
switch until the desired pre-load is reached.
To increase (HIGH)
To decrease (LOW)
1.
2.
3.
08/07/15 10:18:16 31MCA680 0188 
(Models not equipped with Navigation System)
(Models equipped with Navigation System)
(Models not equipped with Navigation System)
(Models equipped with Navigation System)
182
Suspension
Servicing Your Honda
Storing Pre-load Into the Memory
Selecting the Memorized Position
You may store two selected adjustments in ‘‘MEMO 1’’ or ‘‘MEMO 2’’.
Adjust the pre-load to the desired position.
Push and hold the MEMO 1 or MEMO 2 button until ‘‘STORE MEMO 1’’ or
‘‘STORE MEMO 2’’ blinks in the multi information display. When the
blinking stops, the current position is stored in memory.
Storing Stored
Push the MEMO (1 or 2) button to select the memorized position. ‘‘CALL
MEMO 1’’ or ‘‘CALL MEMO 2’’ will blink. When the position is selected,
‘‘MEMO 1’’ or ‘‘MEMO 2’’ will turn on.
Calling Called
Pushing the rear suspension spring pre-load adjustment switch or the MEMO
(1 or 2) button while selecting a memorized position will cancel the calling
procedure.
1.
2.
08/07/15 10:18:34 31MCA680 0189 
(Models not equipped with
Navigation System)
(Models equipped with
Navigation System)
For USA
For Canada
183
Suspension
Servicing Your Honda
Each MEMO button stores only one pre-load position. Storing a new position
erases the previous setting stored in that button’s memory. If you want to add a
new position while retaining the current one, use the other memory button.
All stored pre-load positions will be lost if your motorcycle’s battery goes low
(or dead) or is disconnected.
If ‘‘SUS ADJ ERROR’’ blinks on the display, contact your Honda dealer.
08/07/15 10:18:41 31MCA680 0190 
RIGHT HANDLEBAR
brake lever
index mark
adjuster dial
184
Front Brake Lever Adjustment
Brakes
Servicing Your Honda
Safety Precautions
The hydraulic braking systems on your motorcycle dissipate the heat generated
by the friction of the brake pads on the brake discs as the wheels are slowed.
As the brake pads wear, the brake fluid level will drop. A leak in the system will
also cause the level to drop.
Frequently inspect the system to ensure there are no fluid leaks. Periodically
inspect the brake fluid level and the brake pads for wear.
If the brake lever or brake pedal freeplay does not feel within the normal range
while riding, check the brake pads for wear (page ). Worn pads should be
replaced. If the pads are not worn beyond the recommended limit, there is
probably air in the brake system. See your Honda dealer to have the air bled
from the system.
Refer to on page .
The distance between the tip of the brake lever and the grip may be adjusted.
Turn the adjuster dial while pushing the brake lever forward.
Align the index mark on the brake lever with the numbers on the adjuster dial.
Apply the brake, release it, then spin the wheel and check that it rotates freely.
Repeat this procedure several times.
1.
2.
3.
187
142
08/07/15 10:18:54 31MCA680 0191 
Honda DOT 4 Brake Fluid
brake fluid
185
Brake Fluid Recommendation
Fluid Level Inspection
Brakes
Servicing Your Honda
Safety Precautions
Brake fluid can damage plastic and painted surfaces. Handle with care.
The recommended brake fluid is Honda DOT 4 Brake Fluid, or any brake fluid
of equal quality and performance. Use fresh brake fluid from a sealed container.
Be sure to read the label before opening the sealed container. An opened
container may be contaminated or may have absorbed moisture from the air.
Refer to on page .
If your inspection indicates a low fluid level, have your Honda dealer add the
recommended brake fluid.
Do not add or replace brake fluid, except in an emergency. If you do add fluid,
have your Honda dealer check the system as soon as possible.
Wipe up spills immediately. Avoid brake fluid contact with skin or eyes. If it
comes in contact with your eyes, wash them out with clean water and
immediately call a doctor. If it comes in contact with your skin, wash with clean
water and, if necessary, call a doctor.
142
08/07/15 10:19:02 31MCA680 0192 
RIGHT HANDLEBAR
(Front Brake)
RIGHT SIDE
(Rear Brake)
LOWER level mark UPPER level mark
LOWER level mark
186
Brakes
Servicing Your Honda
Place your motorcycle in an upright position on a firm, level surface.
Check the fluid level.
Front: It should be above the LOWER level mark.
Rear: It should be between the UPPER and LOWER level marks.
If the level is at or below the LOWER level mark, check the brake pads for
wear.
Worn pads should be replaced. If the pads are not worn beyond the
recommended limit, have your brake system inspected for leaks.
Check for deterioration or cracks in the hoses and fittings.
Make sure there are no fluid leaks.
Other Inspections
1.
2.
08/07/15 10:19:10 31MCA680 0193 
LEFT FRONT (right side similar)
RIGHT REAR
grooves
cutouts
187
Brake Pad Wear
Brakes
Servicing Your Honda
Safety PrecautionsRefer to on page .
Front Brake
Always inspect both pads in both the right and left front brake calipers.
Rear Brake
Check the grooves in each pad. If either pad is worn to the bottom of the
grooves, replace both pads as a set. See your Honda dealer for this service.
Brake pad wear depends upon the severity of usage, the type of riding, and road
conditions. Generally, the pads will wear faster on wet and dirty roads. Inspect
the pads at each regular maintenance interval (page ).
Check the cutouts in each pad. If either pad is worn to the cutout, replace both
pads as a set. See your Honda dealer for this service.
142
147
08/07/15 10:19:19 31MCA680 0194 
LEFT FRONT
LEFT REAR
brake caliper
188
Brake System Inspection
Brakes
Servicing Your Honda
Safety PrecautionsRefer to on page .
Place the motorcycle on its center stand, stop the engine, and place the
transmission in neutral.
Move the left caliper assembly upward while slowly rotating the rear wheel.
The brake system is normal if the rear wheel stops. If the rear wheel does not
stop, see your Honda dealer.
1.
2.
142
08/07/15 10:19:26 31MCA680 0195 
Using tires that are excessively
worn or improperly inflated
cancauseacrashinwhichyou
can be seriously hurt or killed.
Follow all instructions in this
owner’s manual regarding tire
inflation and maintenance.
189
Tires
Servicing Your Honda
To safely operate your motorcycle, your tires must be the proper type and size,
in good condition with adequate tread, and correctly inflated for the load you are
carrying.
The following pages give detailed information on how and when to check your
air pressure, how to inspect your tires for wear and damage, and our
recommendations for tire repair and replacement.
08/07/15 10:19:31 31MCA680 0196 
36 psi (250 kPa , 2.50 kgf/cm )
41 psi (280 kPa , 2.80 kgf/cm
)
front
rear
190
Air Pressure
Tires
Servicing Your Honda
Safety PrecautionsRefer to on page .
Properly inflated tires provide the best combination of handling, tread life, and
riding comfort. Generally, underinflated tires wear unevenly, adversely affect
handling, and are more likely to fail from being overheated. Overinflated tires
make your motorcycle ride harshly, are more prone to damage from road
hazards, and wear unevenly.
Even though your motorcycle is equipped with tire pressure monitoring system
(TPMS), we recommend that you visually check your tires before every ride and
use an air pressure gauge to measure the air pressure at least once a month or
any time you think the tires might be low. Even tires that are in good condition
may lose one to two psi per month if not checked and adjusted regularly.
See page for more information.
Tubeless tires have some degree of self-sealing ability if they are punctured.
However, because leakage is often very slow, you should look closely for
punctures whenever a tire is not fully inflated.
Always check air pressure when your tires are ‘‘cold’’, after the motorcycle has
been parked for at least three hours. If you check air pressure when your tires
are ‘‘warm’’ –– even if your motorcycle has only been ridden for a few miles ––
the readings will be higher. If you let air out of warm tires to match the
recommended cold pressures, the tires will be underinflated.
The recommended ‘‘cold’’ tire pressures are:
142
85
08/07/15 10:19:40 31MCA680 0197 
0.06 in (1.5 mm)
0.08 in (2.0 mm)
front
rear
wear indicator
wear indicator location
mark
191
Inspection
Tires
Servicing Your Honda
Safety PrecautionsRefer to on page .
Whenever you check the tire pressures, you should also look for:
Also, if you hit a pothole or hard object while riding, pull to the side of the road
as soon as you safely can and carefully inspect the tires for damage.
For the best performance, you should replace a tire before the tread depth at the
center reaches the following limits:
If the wear indicators are visible, replace the tire immediately as it is no longer
safe.
Bumps or bulges in the side of the tire or the tread. Replace any tire that has a
bump or bulge.
Cuts, slits, or cracks in the tires.
Replace the tire if you can see fabric or cord.
Nails or other foreign objects embedded in the side of the tire or tread.
Excessive tread wear.
142
08/07/15 10:19:52 31MCA680 0198 
××××
××××
×××× ××××
TIRE LABELING EXAMPLE
(1)
(1) tire identification number (TIN)
192
Tire Service Life
Tires
Servicing Your Honda
Tire Identification Number (TIN)
The service life of your tires is dependent on many factors, including, but not
limited to, riding habits, road conditions, vehicle loading, tire pressure,
maintenance history, speed, and environmental conditions (even when the tires
are not in use).
In addition to your regular inspections and tire pressure maintenance, it is
recommended that you have annual inspections performed once the tires reach 5
years old. It is also recommended that all tires be removed from service after 10
years from the date of manufacture, regardless of their condition or state of
wear.
The last four digits of the TIN (tire identification number) ( ) are found on the
sidewall of the tire, and indicate the date of manufacture.
The tire identification number (TIN) is a group of numbers and letters that look
like the following example.
TIN is located on the sidewall of the tire.
Factory code
Tire type code
22 07 Date of manufacture
DOT This indicates that the tire meets all requirements of the U.S.
Department of Transportation.
DOT 22 07
(2)
(3)
(4)
Year
Week
1
(3) (4)(2)
08/07/15 10:20:00 31MCA680 0199 
193
Tire Repair
Tires
Servicing Your Honda
Safety Precautions
If You Have a Flat Tire,
Using a puncture-repairing agent can damage the TPMS sensors, causing the
TPMS indicator to turn on. Have you motorcycle checked by your Honda
dealer as soon as possible.
Use caution to not damage the TPMS sensor if an internal plug patch must be
used to repair the tire. If you have a tire professionally repaired at a non-
Honda facility, we recommend that you have the work checked by your Honda
dealer. TPMS wheels require special handling when changing the tire. Failure
to follow the proper tire replacement procedure can result in damage to the
TPMS sensor.
Refer to on page .
We strongly recommend that you replace, not repair, any tire that is punctured or
damaged. As discussed below, a tire that is repaired, either temporarily or
permanently, will have lower speed and performance limits than a new or
undamaged tire.
A temporary repair can sometimes be made in an emergency situation.
However, since a temporary repair may not hold, you must ride very slowly,
preferably without any cargo or passenger, and have the tire replaced or
permanently repaired as soon as possible.
(For more information on temporary repairs, see
page .)
142
218
08/07/15 10:20:07 31MCA680 0200 
Installing improper tires on your
motorcycle can affect handling
and stability. This can cause a
crash in which you can be
seriously hurt or killed.
Always use the size and type of
tires recommended in this
owner’s manual.
194
Tire Replacement
Tires
Servicing Your Honda
Safety Precautions
A permanent repair, such as an internal plug patch, can be made if a tire has only
a small puncture in the tread area. With such a repair, you should not exceed
50 mph (80 km/h) for the first 24 hours, or 80 mph (130 km/h) at any time
thereafter. In addition, you may not be able to safely carry as much weight. If
you choose to have a tire repaired, be sure the repair work is performed by a
professional and that the wheel is balanced before you ride.
Refer to on page .
The tires that came on your motorcycle were designed to match the performance
capabilities of your motorcycle and provide the best combination of handling,
braking, durability, and comfort.
If you have a tire professionally repaired at a non-Honda facility, we
recommend that you have the work checked by your Honda dealer.
When replacing, use the original equipment tires or equivalent tires of the same
size, construction, speed rating, and load range as the originals.
142
08/07/15 10:20:14 31MCA680 0201 
BRIDGESTONE G709 RADIAL
DUNLOP D250F
BRIDGESTONE G704 RADIAL
DUNLOP D250
130/70R18M/C 63H
180/60R16M/C 74H
radial, tubeless
front
rear
type
195
Tires
Servicing Your Honda
The recommended tires for your motorcycle are:
Have the wheel balanced after the tire is installed.
Whenever you replace a tire, remember:
Have the tire replaced by your Honda dealer.
Important Safety Reminders
Do not install a tube inside a tubeless tire on this motorcycle. Excessive heat
build-up can cause the tube to burst.
Use only tubeless tires on this motorcycle. The rims are designed for tubeless
tires, and during hard acceleration or braking, a tube-type tire could slip on
the rim and cause the tire to rapidly deflate.
Do not install car tires on this motorcycle. During installation the tire may
separate from the rim with enough force to cause serious injury or death.
When replacing tires, use only the recommended tires as shown above and on
the tire information label. Use of other tires on the model equipped with ABS
may impair proper ABS function. The ABS computer works by comparing
wheel speed.
Non-recommended tires can affect wheel speed and may confuse the ABS
computer.
If you ever replace a wheel, make sure that the wheel’s specifications match
those of the original wheels.
Be sure you use only TPMS-specific wheels. Not using TPMS-specific
wheels can cause an air leak, a tire pressure monitoring system failure, or both.
Replacement wheels are available at your Honda dealer.
08/07/15 10:20:26 31MCA680 0202 
LEFT SIDE
stand spring
196
Side Stand
Servicing Your Honda
Safety PrecautionsRefer to on page .
Check that the side stand assembly is working properly. If the side stand is
stiff or squeaky, clean the pivot area and lubricate the pivot bolt with clean
grease.
Check the side stand ignition cut-off system:
Sit on the motorcycle and put the transmission in neutral.
Raise the side stand.
Shift the transmission into gear.
Lower the side stand all the way.
Start the engine.
Pull the clutch lever in.
The engine should stop as you lower the side stand. If the engine doesn’t stop,
see your Honda dealer for service.
Check the side stand spring for damage or loss of tension.
1.
2.
3.
4.
5.
6.
142
08/07/15 10:20:37 31MCA680 0203 
197
WARNING:
Wash your hands after handling.
Battery
Servicing Your Honda
Your battery is a maintenance-free type and can be permanently damaged if
the cap strip is removed.
Battery Charging,
Battery Storage,
Your motorcycle has a maintenance-free type battery. You do not have to check
the battery electrolyte level or add distilled water as you would with a
conventional-type battery.
Electrical accessories use current from the battery, even when the ignition is
OFF. Limited operation also allows the battery to discharge. If you have
electrical accessories on your motorcycle or do not ride frequently, we
recommend that you charge the battery frequently (see
page ).
If you do not expect to ride your motorcycle for at least two weeks, we
recommend you remove the battery, or at least disconnect the battery cables
(negative cable first).
If you plan to store your motorcycle, see page .
If your battery seems weak and/or is leaking electrolyte (causing slow starting or
other electrical problems), see your Honda dealer.
Battery posts, terminals and related accessories contain lead and
lead compounds.
198
200
08/07/15 10:20:44 31MCA680 0204 
The battery gives off explosive
hydrogen gas during normal
operation.
A spark or flame can cause the
battery to explode with enough
force to kill or seriously hurt you.
Wear protective clothing and a
face shield, or have a skilled
mechanic do the battery
maintenance.
198
Battery Storage
Battery
Servicing Your Honda
Safety Precautions
Battery Charging,
Refer to on page .
If you plan to store your motorcycle, we recommend you remove the battery and
store it where it can be charged at least every 30 days to maintain its service life.
If you do not remove the battery, we recommend disconnecting the battery
cables (negative cable first).
You will get the best storage results from removing the battery and slow
(trickle) charging it every 30 days (see page ).
Before you remove the battery, be sure to read all the information that follows,
as well as the information on the battery label.
142
200
08/07/15 10:20:51 31MCA680 0205 
LEFT SIDE
positive ( ) terminal lead
clip
battery plate
negative ( ) terminal lead
battery box cover battery holder bolt
199
Battery
Servicing Your Honda
The battery is located in the battery box behind the left side cover.
Check all bolts and other fasteners are secure.
Reinstall in the reverse order of removal. Be sure to connect the positive ( )
terminal first, then the negative ( ) terminal.
Installation
Slow charge the battery (see following section) once every 30 days.
Clean the battery box after removing the battery for storage. Dry the battery
box and, if paint is missing, re-paint the area.
Store your battery in an easy-to-reach location off the floor, in an area
protected from freezing temperatures and direct sunlight.
Charge the battery (see following section), unless you have been riding
regularly.
Be careful to avoid damaging the cover under the battery box when you
remove the battery.
Pull the battery out of the battery box.
Disconnect the positive ( ) terminal lead.
Remove the bolt and open the battery holder.
Disconnect the negative ( ) terminal lead from the battery first.
Pull the clip and remove the battery plate.
Remove the left side cover (page ).
Make sure the ignition switch is OFF.
Removal
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
11.
10.
155
08/07/15 10:21:06 31MCA680 0206 
‘‘trickle’’ charger
200
Battery Charging
Battery
Servicing Your Honda
Safety PrecautionsRefer to on page .
Be sure to read the information that came with your battery charger and follow
the instructions on the battery. Improper charging may damage the battery.
We recommend using a ‘‘trickle’’ charger for home charging. These units can
be left connected for long periods without risking damage to the battery.
However, do not intentionally leave the charger connected longer than the time
period recommended in the charger’s instructions.
Avoid using an automotive-type battery charger. An automotive charger can
overheat a motorcycle battery and cause permanent damage.
142
08/07/15 10:21:12 31MCA680 0207 
201
General Recommendations
Appearance Care
Servicing Your Honda
Safety Precautions
High pressure water (or air) can damage certain parts of your motorcycle.
Frequent cleaning and polishing will keep your Honda looking newer longer.
Frequent cleaning also identifies you as an owner who values your motorcycle.
A clean motorcycle is also easier to inspect and service.
Refer to on page .
To clean your motorcycle, you may use:
Avoid products that contain harsh detergents or chemical solvents that could
damage the metal, paint, and plastic on your motorcycle.
If your motorcycle is still warm from recent operation, give the engine and
exhaust system time to cool off.
Park in a shady area. Washing your motorcycle in bright sunlight may cause
the finish to fade because water droplets intensify the sun’s brightness.
Spotting is also more likely because surface water can dry before you have
time to wipe it off.
Clean your motorcycle regularly to protect surface finishes.
After cleaning, inspect for damage, wear, and leaks (fuel, oil, coolant, brake,
and clutch fluid).
The audio system is designed to be weatherproof unless it is sprayed directly
with hose.
We recommend the use of a garden hose to wash your motorcycle. High
pressure washers (like those at coin-operated car washes) can damage certain
parts of your motorcycle.
water
a mild, neutral detergent and water
a mild spray and wipe cleaner/polisher
a mild spray and rinse cleaner/degreaser and water
142
08/07/15 10:21:23 31MCA680 0208 
202
Washing Your Motorcycle with a Mild Detergent
Appearance Care
Servicing Your Honda
Safety PrecautionsRefer to on page .
Rinse your motorcycle thoroughly with cool water to remove loose dirt.
Fill a bucket with cool water. Mix in a mild, neutral detergent, such as dish
washing liquid or a product made especially for washing motorcycles or
automobiles.
Wash your motorcycle with a sponge or a soft towel. As you wash, check for
heavy grime. If necessary, use a mild cleaner/degreaser to remove the grime.
If the inside of the headlight lens appears clouded immediately after washing,
it should clear after a few minutes of riding.
After washing, rinse your motorcycle thoroughly with plenty of clean water
to remove any residue. Detergent residue can corrode alloy parts.
Dry your motorcycle with a chamois or a soft towel. Leaving water on the
surface to air dry can cause dulling and water spots. As you dry, inspect for
chips and scratches.
Start the engine and let it idle for several minutes. The engine heat will help
dry moist areas.
As a precaution, ride your motorcycle at a slow speed and apply the brakes
several times. This will help dry the brakes and restore normal braking
performance.
1.
3.
2.
4.
5.
6.
7.
142
08/07/15 10:21:32 31MCA680 0209 
203
Cleaning the Windscreen
Cleaning the Display
Appearance Care
Servicing Your Honda
Safety Precautions
To avoid possible scratching or other damage, use only water and a soft cloth
or sponge to clean the windscreen.
To avoid possible scratching or other damage, use only water and a soft cloth
or sponge to clean the display.
Refer to on page .
Using plenty of water, clean the windscreen with a soft cloth or sponge. (Avoid
using detergents or any kind of chemical cleaner on the windscreen.) Dry with a
soft, clean cloth.
For a dirtier windscreen, use a diluted neutral detergent with a sponge and plenty
of water. Make sure to wash off all the detergent. (Detergent residue may cause
windscreen cracks.)
Replace the windscreen if scratches cannot be removed and they obstruct clear
vision.
Take care to keep battery electrolyte, brake fluid, or other chemical solvents off
the windscreen and screen garnish. They will damage the plastic.
Clean the display with a soft, damp cloth. You may use a mild cleaner intended
for eyeglasses or computer displays.
Harsher chemicals may damage the display.
Take care to keep battery electrolyte, brake fluid, or other chemical solvents off
the display. They will damage the display.
142
08/07/15 10:21:41 31MCA680 0210 
Apply a spray cleaner/polish and wipe
with a non-abrasive cloth.
General cleaning.
Polishing paint,
chrome, glass, and
clear plastic. Dust.
Fingerprint smudges.
Light road grime. Spray any difficult-to-reach or very dirty
areas with a spray cleaner/degreaser.
Rinse and dry.
Apply a spray cleaner/polish and wipe
with a non-abrasive cloth.
Use a spray cleaner/degreaser.
If necessary, rub with a sponge. Rinse
and dry.
Apply a spray cleaner/polish and wipe
with a non-abrasive cloth.
Apply a high quality chrome/aluminum
polish and wipe with a non-abrasive cloth.
Heavy grime. Oil leaks.
Brake dust.
Dull, corroded chrome
or aluminum.
Motorcycle Condition Recommended Cleaning
204
Spray Cleaning Your Motorcycle
Appearance Care
Servicing Your Honda
Safety PrecautionsRefer to on page .
Avoid using spray cleaner products on the tires or suspension components.
Suggestions for using spray cleaner(s) follow:
142
08/07/15 10:21:56 31MCA680 0211 
205
Aluminum Wheel Maintenance
Clean the Matte Painted Surface
Appearance Care
Servicing Your Honda
Safety Precautions
Safety Precautions
Refer to on page .
Aluminum may corrode from contact with dirt, mud, or road salt. Clean the
wheels after riding through any of these substances. Use a wet sponge and mild
detergent, or a commercially-available spray cleaner/degreaser designed for use
on aluminum. Avoid stiff brushes, steel wool, or cleaners containing abrasives
or harsh chemical compounds.
After washing, rinse with plenty of water and dry with a clean cloth. Then apply
a mild, commercially-available spray cleaner/polish or wax.
For stained or dull-looking wheels, use a quality chrome/aluminum polish to
restore the finish.
After you finish cleaning the wheels, it’s important to check for and remove any
cleaner or polish residue found on the brake discs or pads. Use Honda Contact/
Brake Cleaner or an equivalent brake degreasing agent.
Refer to on page .
Use a soft cloth or sponge, plenty of water, and a mild detergent to clean the
matte paint. Dry with a soft, clean cloth.
Do not use polishing compounds or wax containing polishing compounds. These
can damage or discolor the paint.
To keep your Honda looking new, clean and polish it frequently.
142
142
08/07/15 10:22:04 31MCA680 0212 
206
Finishing Touches
Appearance Care
Servicing Your Honda
Safety PrecautionsRefer to on page .
After washing your motorcycle, consider using a commercially available spray
cleaner/polish or quality liquid or paste wax to finish the job. Use only a non-
abrasive polish or wax made specifically for motorcycles or automobiles. Apply
the polish or wax according to the instructions on the container.
If a surface on your motorcycle is chipped or scratched, your Honda dealer has
touch-up paint to match your motorcycle’s color. Be sure to use your
motorcycle’s color code (page ) when you buy touch-up paint.
If the frame has a chip that exposes the metal, first apply primer (to prevent
corrosion) and then apply the touch-up paint. Several thin layers of touch-up
paint are better than one thick coat.
142
241
08/07/15 10:22:10 31MCA680 0213 
207
Tips
Tips
Here’s a few helpful tips on how to store and transport your Honda, and how to
be an environmentally responsible motorcycle owner.
.........................................................................................Storing Your Honda .
........................................................................Transporting Your Motorcycle .
...................................................................................You & the Environment .
208
210
211
08/07/15 10:22:16 31MCA680 0214 
208
Preparation for Storage
Tips
Storing Your Honda
Honda Motorcycle Winter
Storage Guide,
Safety Precautions
If you won’t be riding for an extended period, such as during the winter,
thoroughly inspect your motorcycle and correct any problem before storing it.
That way, needed repairs won’t be forgotten and it will be easier to get your
motorcycle running again.
For more information about storage, refer to the
available from your Honda dealer (USA only).
We suggest you perform the following procedures to keep your motorcycle in
top condition. These storage procedures will reduce the deterioration that can
occur during storage.
Change the engine oil and filter (page ).
Make sure the cooling system is filled with a 50/50% antifreeze solution
(page ).
Fill the fuel tank. Make sure the fuel fill cap is properly installed.
To prevent rusting in the cylinders, perform the following:
Remove the spark plug caps from the spark plugs. Using tape or string,
secure the caps to any convenient plastic body part so that they are
positioned away from the spark plugs.
Remove the spark plugs from the engine and store them in a safe place. Do
not connect the spark plugs to the spark plug caps.
This procedure requires a means for draining and disposing of drained fuel
(page ).
Refer to on page .
1.
2.
3.
4.
142
211
167
170
08/07/15 10:22:26 31MCA680 0215 
209
Removal from Storage
Tips
Storing Your Honda
Safety Precautions
Pour a tablespoon (15 20 cc) of clean engine oil into each cylinder and
cover the spark plug holes with a piece of cloth.
With the engine stop switch in the RUN position, press the start button
several times to crank the engine and distribute the oil.
Reinstall the spark plugs and spark plug caps.
Remove the battery and charge it fully. Store it in an area protected from
freezing temperatures and direct sunlight. Slow charge the battery
(page ) once a month.
Wash and dry your motorcycle. Wax all painted surfaces. Apply rust-
inhibiting oil to the chrome pieces.
Inflate the tires to their recommended pressures (page ).
Store your motorcycle in an unheated area, free of dampness, away from
sunlight, with a minimum of daily temperature variation.
Cover your motorcycle with a porous material. Avoid using plastic or similar
non-breathing, coated materials that restrict air flow and allow heat and
moisture to accumulate.
Refer to on page .
Uncover and clean your motorcycle.
If your motorcycle has been stored for more than four months –– change the
engine oil (page ).
If your motorcycle has been stored for more than two months –– ask your
Honda dealer to drain and replace the fuel.
Charge the battery (page ) as required. Install the battery.
Perform a pre-ride inspection (page ), then test-ride your motorcycle at
low speeds.
1.
2.
3.
4.
5.
5.
6.
7.
8.
9.
47
200
200
142
167
200
08/07/15 10:22:38 31MCA680 0216 
210
Tips
Transporting Your Motorcycle
If your motorcycle needs to be transported, it should be carried on a motorcycle
trailer, or a truck or trailer with a flatbed area. Do not tow your motorcycle, as
towing can seriously damage the transmission.
When contacting a towing or transporting service, be sure to ask if they have a
flatbed area, a loading ramp or power ramp to safely lift the motorcycle, and
motorcycle tie-down straps.
08/07/15 10:22:43 31MCA680 0217 
211
Tips
Recycle Wastes.
Choose Sensible Cleaners.
You & the Environment
Owning and riding a motorcycle can be enjoyable, but you must do your part to
protect nature.
Following are tips on how you can be an environmentally responsible
motorcycle owner.
It’s illegal and thoughtless to put used engine oil in the trash,
down a drain, or on the ground. Used oil, gasoline, coolant, and cleaning
solvents contain poisons that can hurt refuse workers and contaminate our
drinking water, lakes, rivers, and oceans. Before changing your oil, make sure
you have the proper containers. Put oil and other toxic wastes in separate
sealed containers and take them to a recycling center. Call your local or state
office of public works or environmental services to find a recycling center in
your area, and to get instructions on how to dispose of non-recyclable wastes.
Use a biodegradable detergent when you wash
your motorcycle. Avoid aerosol spray cleaners that contain
chlorofluorocarbons (CFCs) which damage the atmosphere’s protective ozone
layer. Don’t throw cleaning solvents away; see the following guidelines for
proper disposal.
08/07/15 10:22:48 31MCA680 0218 
212
Tips
08/07/15 10:22:50 31MCA680 0219 
213
Taking Care of the Unexpected
Taking Care of the Unexpected
This section discusses the more common problems that can occur with your
motorcycle while you’re riding. It tells you how to evaluate each problem and
what actions you can take to try to resume riding. If the problem cannot be
safely solved, this section also gives instructions on the proper way to have your
motorcycle transported.
For information about transporting your motorcycle, see page .
...........................................................................................General Guidelines .
...............................................................If Your Engine Quits or Won’t Start .
....................................................................................If You Have a Flat Tire .
................................................................................If Your Engine Overheats .
.........................................................If the Low Oil Pressure Indicator Lights .
.................................................................................................IfaFuseBlows .
.....................................................................................................If You Crash .
.....................................................................................If You Lose Your Key .
....................................................................If Your Battery Is Low (or Dead) .
210
214
215
218
229
231
232
235
236
237
08/07/15 10:22:59 31MCA680 0220 
214
General Guidelines
Taking Care of the Unexpected
Taking Care of the Unexpected
Keeping your motorcycle well-maintained is the best way to reduce the
possibility of having a problem on the road.
Should you ever have a problem while riding, please follow these guidelines:
Always put personal safety first.
Take time to assess the situation and your options before deciding what to do.
If the problem is relatively minor and you have the tools, supplies, and skills
to make a temporary repair, be sure to have permanent repairs made as soon
as possible.
Do not continue riding if you are hurt or your motorcycle is not in safe riding
condition.
Additional recommendations for specific problems follow.
Remember to take along your owner’s manual, the tool kit that came with your
motorcycle, and any other items (such as tire repair supplies and additional
tools) that might help you solve a problem on your own.
08/07/15 10:23:08 31MCA680 0221 
SYMPTOM:
transmission not in neutral
WHAT TO DO
Turn the ignition switch ON.
Turn the engine stop switch to RUN.engine stop switch OFF
ignition switch OFF
POSSIBLE CAUSE
Shift into neutral.
reverse (RVS) switch ON Push the reverse (RVS) switch to the
OFF position.
side stand down (when
transmission not in neutral)
Put the transmission in neutral or raise
the side stand and pull the clutch lever in.
blown fuse Replace with a new fuse of the same
rating (page ).
battery lead loose Tighten the battery lead.
low (or dead) battery Charge the battery (page ). If
charging doesn’t help, see your Honda
dealer.
faulty starter motor If all possible causes are negative, the
starter motor may be faulty. See your
Honda dealer.
200
232
Starter motor doesn’t operate.
215
Taking Care of the Unexpected
If Your Engine Quits or Won’t Start
Starter motor doesn’t operate
Starter motor works, but the engine won’t start
Proper operation and maintenance can prevent starting and engine performance
problems. In many cases, the cause of the problem may be a simple operational
oversight.
If you have a problem starting the engine or experience poor engine
performance the following information may help you. If you can’t correct the
problem, see your Honda dealer.
If your motorcycle won’t start, listen as you press the start button. If you don’t
hear the starter motor turning, refer to the
symptom. If you can hear the starter motor working normally, refer to the
symptom.
08/07/15 10:23:24 31MCA680 0222 
weak battery
SYMPTOM:
POSSIBLE CAUSE WHAT TO DO
Fill the fuel tank.
See (page ).
out of fuel
flooded engine
loose or unconnected
spark plug caps
Install the spark plug caps securely. If
the engine still won’t start, see your
Honda dealer.
loose battery cables
Charge the battery (page ). If
charging doesn’t help, see your Honda
dealer.
SYMPTOM:
side stand down
POSSIBLE CAUSE WHAT TO DO
Raise the side stand. Start again.
Tighten the battery terminal bolts.
74
200
Starter motor works, but the engine won’t start.
Engine starts, but stalls as you shift into gear.
Flooded Engine
216
Taking Care of the Unexpected
If Your Engine Quits or Won’t Start
08/07/15 10:23:35 31MCA680 0223 
WHAT TO DOPOSSIBLE CAUSE
SYMPTOM:
idles roughly, too fast,
stalls
overheating
low oil pressure
runs erratically, misfires
See your Honda dealer.
Check the coolant temperature gauge.
Refer to
page .
Check the low oil pressure indicator.
Refer to
page .
See your Honda dealer.
See your Honda dealer.
May damage catalytic converters.
See your Honda dealer.
May damage catalytic converters.
May damage catalytic converters.
If applicable, switch to the recommended
octane gasoline (page ) or change
your brand of gasoline. If the problem
persists, see your Honda dealer.
See your Honda dealer.
pre-ignition (runs on after
ignition switched OFF)
afterfires (backfires)
detonates or pings under
load
sooty exhaust (rich fuel
mixture)
blubbers (rich fuel
mixture)
See your Honda dealer.
229
231
160
Engine starts, but runs poorly.
If Your Engine Overheats,
If theLow Oil Pressure
Indicator Lights,
217
Taking Care of the Unexpected
If Your Engine Quits or Won’t Start
08/07/15 10:23:55 31MCA680 0224 
Riding your motorcycle with a
temporary tire repair can be
risky. If the temporary repair
fails, you can crash and be
seriously injured or killed.
Ifyoumustridewitha
temporary tire repair, ride slowly
and carefully and do not exceed
30 mph (50 km/h) until the tire is
permanently repaired or
replaced.
218
Taking Care of the Unexpected
If You Have a Flat Tire
A flat tire is always unwelcome, especially if you are far from help. If you think
you are losing air, or you hit a pothole or hard object, pull safely to the side of
the road so you can inspect the tires and assess the situation. (Be sure to park on
a firm, level surface and use the center stand for support.) You should examine
the tire treads and sidewalls for foreign objects or damage. If you find a tire that
has been punctured or damaged, you have two options.
Option 1:
Have Your Motorcycle Transported
If a tire has a major puncture or a cut in the tread or sidewall, or the bead has
come loose from the rim, there is probably not much you can do except have
your motorcycle transported to a Honda dealer or other qualified service facility.
Even with a simple puncture, this may be the safest and least troublesome
solution. For transporting instructions, see page .
Option 2:
Make a Temporary Roadside Repair
If a tire has only a minor nail puncture and is not completely flat, you may be
able to make an emergency repair that could allow you to continue riding to
where you can get the tire replaced or permanently repaired.
210
08/07/15 10:24:02 31MCA680 0225 
219
Types of Temporary Repairs
Taking Care of the Unexpected
If You Have a Flat Tire
Plug the hole:
Inflate the tire:
Using a puncture-repairing agent can damage the TPMS sensors, causing the
TPMS indicator to turn on. Have you motorcycle checked by your Honda
dealer as soon as possible.
Use caution to not damage the TPMS sensor if an internal plug patch must be
used to repair the tire. If you have a tire professionally repaired at a non-
Honda facility, we recommend that you have the work checked by your Honda
dealer. TPMS wheels require special handling when changing the tire. Failure
to follow the proper tire replacement procedure can result in damage to the
TPMS sensor.
Due to the uncertainty of any temporary repair, you should ride slowly (not over
30 mph, 50 km/h) and carefully (preferably without a passenger or cargo) until
the tire is replaced or permanently repaired. Stop frequently and check the air
pressure. If the tire is losing pressure, it may be unsafe to continue riding. As the
tire gets low, it will affect the handling of your motorcycle (especially with a
passenger and cargo), and it may overheat and blow out.
The following types of temporary repairs generally require a source of air to
inflate the tire. Possible sources include CO cartridges or cans of compressed
air designed to inflate a tire.
The idea here is to do something to temporarily stop the leak.
If you have a tubeless tire repair kit, you can pull out the nail and try inserting
an external plug in the puncture. Follow the instructions that came with the
repair kit and be sure to inflate the tire to the correct pressure.
Tubeless tires have some self-sealing ability if they are
punctured and the result is usually just a slow leak. If this is the case, you can
try inflating the tire to see if it will hold air pressure. If you can see a nail or
other object embedded in the tire tread, do not remove it at this time.
For more information on tire repair, see page .193
2
08/07/15 10:24:09 31MCA680 0226 
220
Emergency Front Wheel Removal/Installation
Should You Repair or Replace a Tire?
Taking Care of the Unexpected
If You Have a Flat Tire
Safety Precautions
Avoid depressing the brake lever and brake pedal when the wheel is off the
motorcycle. This will force the caliper pistons out of the cylinders. The
result will be a loss of brake fluid. If this occurs, the brake system will
require service.
See your Honda dealer for this service.
Avoid getting grease, oil, or dirt on the disc or pad surfaces. Any
contamination can cause poor brake performance or rapid pad wear after
reassembly.
To avoid damage to the brake hose during removal, support the caliper
assembly so that it doesn’t hang from the hose. Do not twist the brake hose.
When removing and installing the wheel, be careful not to damage the
sensor and pulser ring.
Remove the parts in sequence, according to the order in the illustration.
Raise the front wheel off the ground by placing a support block under the
engine, being careful to avoid contact with the exhaust pipe and front lower
cover.
Park your motorcycle on a firm, level surface.
Removal
We recommend wheel removal be done only by your Honda dealer or another
qualified mechanic. Do not attempt to remove the wheel on your own. Wheel
removal requires mechanical skill and professional tools.
Refer to on page .
We strongly recommend that you replace, not permanently repair, any tire that is
punctured or damaged, even if the tire has only a minor puncture. For a full
discussion of repairs and replacement, see page .
1.
2.
3.
(Models equipped with ABS)
193
142
08/07/15 10:24:19 31MCA680 0227 
protective tape
221
Taking Care of the Unexpected
If You Have a Flat Tire
For related torque specifications, see page . Cover both sides of the front
wheel with protective tape or an equivalent.
The numbers indicate the disassembly sequence.
223
08/07/15 10:24:25 31MCA680 0228 
(Models equipped with ABS)
222
Taking Care of the Unexpected
If You Have a Flat Tire
08/07/15 10:24:33 31MCA680 0229 
44 lbf·ft (59 N·m , 6.0 kgf·m)
23 lbf·ft (31 N·m , 3.2 kgf·m)
23 lbf·ft (31 N·m , 3.2 kgf·m)
16 lbf·ft (22 N·m , 2.2 kgf·m)
index line
front axle
shaft
recessed surface
223
Taking Care of the Unexpected
If You Have a Flat Tire
Installation
Reassemble the removed parts in the reverse order of removal.
Position the wheel between the fork legs and insert the front axle shaft
from the left side, through the left fork leg and wheel hub.
Fit the brake disc carefully between the brake pads to avoid damaging the
pads.
Align the index line of the front axle shaft with the recessed surface of the
fork leg.
Measure the clearance between the brake disc and the caliper holder on each
side with a 0.028 in (0.7 mm) feeler gauge.
If the feeler gauge inserts easily, remove it and tighten the axle pinch bolts
to the specified torque:
If the feeler gauge cannot be inserted easily, loosen the left axle pinch bolt
and pull the left fork outward or push inward to adjust the clearance. Then
tighten the axle pinch bolts to the specified torque.
Install the bolts and tighten to the specified torque:
axle bolt:
right caliper fixing bolts:
left caliper socket bolt:
(cont’d)
1.
2.
3.
08/07/15 10:24:44 31MCA680 0230 
feeler gauge
224
If You Have a Flat Tire
Taking Care of the Unexpected
Failure to provide adequate disc-to-caliper holder clearance may damage the
brake discs and impair braking efficiency.
08/07/15 10:24:48 31MCA680 0231 
225
Taking Care of the Unexpected
If You Have a Flat Tire
After installing the wheel, apply the brake lever AND brake pedal several
times, then recheck both discs for caliper holder to disc clearance. Do not
operate the motorcycle without adequate clearance.
Check for free wheel rotation after the brake lever and brake pedal are
released. Recheck the wheel if the brake drags or if the wheel does not
rotate freely.
After installing the wheel, operate the brake lever AND brake pedal several
times until you feel pressure. You must restore pressure from BOTH the
lever AND the pedal because this motorcycle is equipped with a Linked
Braking System.
Verify proper brake operation before riding.
Remove the protective tapes from the front wheel.
If a torque wrench was not used for installation, see your Honda dealer as
soon as possible to verify proper assembly. Improper assembly may lead to
loss of braking capability.
4.
5.
08/07/15 10:24:55 31MCA680 0232 
(Models not equipped with Premium Audio)
226
Emergency Rear Wheel Removal/Installation
Taking Care of the Unexpected
If You Have a Flat Tire
Safety PrecautionsRefer to on page .
Park your motorcycle on its center stand on a firm, level surface.
Remove the parts in sequence, according to the order in the illustration.
Avoid getting grease, oil, or dirt on the disc or pad surfaces. Any
contamination can cause poor brake performance or rapid pad wear after
reassembly.
Removal
We recommend wheel removal be done only by your Honda dealer or another
qualified mechanic. Do not attempt to remove the wheel on your own. Wheel
removal requires mechanical skill and professional tools.
When removing and installing the wheel, be careful not to damage the
sensor and pulser ring.
1.
2.
(Models equipped with ABS)
142
08/07/15 10:25:04 31MCA680 0233 
(Models equipped with Premium Audio)
227
If You Have a Flat Tire
Taking Care of the Unexpected
08/07/15 10:25:10 31MCA680 0234 
80 lbf·ft (108 N·m , 11.0 kgf·m)
,
,
,
, : (Models not equipped with Preminum Audio)
, : (Models equipped with Preminum Audio)
228
If You Have a Flat Tire
Taking Care of the Unexpected
Installation
Reassemble the removed parts in the reverse order of removal.
Tighten the rear wheel nuts to the specified torque:
After installing the wheel, apply the brake several times and then check if the
wheel rotates freely. Recheck the wheel if the brake drags or if the wheel
does not rotate freely.
Operate the brake pedal and check the brake operation.
Inspect the brake system (page ).
If a torque wrench was not used for installation, see your Honda dealer as
soon as possible to verify proper assembly. Improper assembly may lead to
loss of braking capability.
1.
2.
3.
4.
5. 184
08/07/15 10:25:19 31MCA680 0235 
229
If Your Engine Overheats
Taking Care of the Unexpected
Continuing to ride with an overheated engine can cause serious engine damage.
A steaming engine indicates a coolant leak. Shut the engine off and wait until
the steaming stops. Look for a leak, but don’t touch the engine or radiator
system. Let everything cool off first.
If there’s no obvious problem, leave the engine on so the fan and coolant
circulating system can continue working. Monitor the temperature gauge. The
needle may drop to the normal range after a brief stop with no load on the
engine.
Check the radiator fan.
If the fan is not working, turn the engine off. Open the fuse box (page )
and check the radiator fan fuse. If the fuse is blown, replace it with the proper
(same rating) spare fuse. Start the engine. If the needle climbs to the red zone
and stays there, turn the engine off.
If the radiator fan is working, visually check the coolant level in the reserve
tank, located behind the left engine side cover. It isn’t necessary to touch the
radiator system.
Normally, the needle on your temperature gauge will rise to a point about
midway between C (cold) and H (hot) and then level off. Hot weather may
cause the needle to rise higher than normal. So will temporary stress such as
climbing a hill. If you’re stuck in stop-and-go traffic, the needle may climb
some, but the radiator fan is designed to prevent overheating. Be aware of these
variations as you monitor the gauge.
If your vehicle is operated at sustained speeds between 10 and 15 miles per
hour in high ambient temperature conditions, you may experience high
temperature gauge readings.
If the temperature gauge rises, shifting to second gear or altering your speed
(either faster or slower) may reduce the temperature reading. If the indicator
reaches the red zone, as soon as it is safe to do so, pull over and let the engine
idle until the indicator drops.
(cont’d)
232
08/07/15 10:25:27 31MCA680 0236 
230
If Your Engine Overheats
Taking Care of the Unexpected
If the reserve tank is low or empty, don’t ride without adding coolant
(page ). After adding coolant, turn the engine on and check the
temperature gauge.
If the needle doesn’t drop, do not ride. The engine needs repair. Transport
your motorcycle to a Honda dealer (page ).
If the temperature drops to normal, check the coolant level. If it has gone
down, add more coolant.
If you are able to resume riding, continue to monitor the gauge frequently.
If there’s a mild leak, you can ride for awhile, carefully watching the gauge. Be
prepared to stop and add more coolant or water. If the leak is bad, transport your
motorcycle to a Honda dealer (page ).
210
210
171
08/07/15 10:25:32 31MCA680 0237 
231
If the Low Oil Pressure Indicator Lights
Taking Care of the Unexpected
Continuing to ride with low oil pressure can cause serious engine damage.
If you check your engine oil level regularly, you should never see the low
oil pressure indicator while riding. Normally, it will only light momentarily
when you turn the ignition switch ON. Occasionally, it may flicker at or
near idling speed.
Low oil pressure may be caused by an oil leak, a low oil level, or some problem
in the engine’s lubrication system.
If the indicator comes on while you’re riding, don’t ignore it. Pull safely to the
side of the road. If possible, pull the clutch lever in and coast to a stop. Stop the
engine as soon as it’s safe to do so.
Check for an oil leak.
Then check the oil level. If necessary, add the recommended oil (page )
to the upper level mark. If you must leave your motorcycle to get oil, secure it
as much as possible.
After adding oil, start the engine, and check that the low oil pressure indicator
goes off. Check for a possible leak.
If the indicator goes off and there is no leak –– resume riding. If there is a
leak –– do not ride the motorcycle until the leak is repaired by a Honda dealer.
166
08/07/15 10:25:40 31MCA680 0238 
30 A
120 A
60 A
30 A, 20 A, 15 A, 10 A, 5 A
40 A
main fuse A
main fuse B
speed limiter fuse
external amplifier
fuse
other fuses
LEFT SIDE
fuse box
fuse box cover
(models
equipped with
Premium Audio)
232
If a Fuse Blows
Taking Care of the Unexpected
If something electrical on your motorcycle stops working, the first thing you
should check for is a blown fuse.
Determine from the chart on the circuit fuse box cover which fuse or fuses
control that component. Check those fuses first, but check all the fuses before
looking elsewhere for another possible cause of the problem. Replace any blown
fuses and check component operation.
All of the electrical circuits on your motorcycle have fuses to protect them from
damage caused by excess current flow (short circuit or overload).
Recommended Fuses
The circuit fuse box (including spare fuses) is located behind the left side
cover.
The main fuse is located in the fuse box.
Remove the fuse box cover.
Remove the left side cover (page ).
To prevent an accidental short circuit, turn the ignition switch OFF before
checking or replacing the fuses.
1.
2.
3.
155
08/07/15 10:25:53 31MCA680 0239 
233
If a Fuse Blows
Taking Care of the Unexpected
Main Fuse Access:
Speed Limiter Fuse Access:
Circuit Fuses Access:
Replacing a fuse with one that has a higher rating greatly increases the chance
of damage to the electrical system.
External Amplifier Fuse Access:
Check the two main fuses (A & B) to see if they are blown.
(cont’d)
To replace main fuses (A & B), see your Honda dealer for this service.
Check the speed limiter (reverse system) fuse to see if it’s blown, see your
Honda dealer for this service.
To check or replace a circuit fuse, pull the old fuse out of its retaining clips
with the fuse remover. Look for a burned wire inside the fuse. If the fuse is
blown, replace it with a spare fuse of the same rating.
If you do not have a replacement fuse with the proper rating for the circuit,
install one with a lower rating.
To replace the external amplifier fuse, see your Honda dealer for this service.
4.
5.
6.
7.
08/07/15 10:26:03 31MCA680 0240 
fuse remover
LEFT SIDE
circuit fuses
main fuse A
speed limiter fuse
fuse remover
spare fuses
blown fuse
main fuse B/external amplifier fuse
234
If a Fuse Blows
Taking Care of the Unexpected
If the replacement fuse of the same rating burns out in a short time, there is
probably a serious electrical problem on your motorcycle. Leave the blown fuse
in that circuit and have your motorcycle checked by your Honda dealer.
If you replace a blown fuse with a spare fuse that has a lower rating, replace the
fuse with the correct rating as soon as you can. Also remember to replace any
spare fuses that were installed.
If you do not have a spare fuse and you cannot ride the motorcycle without
fixing the problem, take a fuse of the same rating or a lower rating from one of
the other circuits that you can do without temporarily.
Install the left side cover.
Close the fuse box cover.8.
9.
08/07/15 10:26:12 31MCA680 0241 
235
If You Crash
Taking Care of the Unexpected
Transporting Your Motorcycle,
Personal safety is your first priority after a crash. If you or anyone else has
been injured, take time to assess the severity of the injuries and whether it
is safe to continue riding. Call for emergency assistance if needed. Also
follow applicable laws and regulations if another person or vehicle is
involved in the crash.
If you decide that you are capable of riding safely, first evaluate the condition
of your motorcycle. If the engine is still running, turn it off and look it over
carefully; inspect it for fluid leaks, check the tightness of critical nuts and bolts,
and secure such parts as the handlebar, control levers, brakes, and wheels.
If there is minor damage, or you are unsure about possible damage, ride slowly
and cautiously. Sometimes, crash damage is hidden or not immediately apparent,
so you should have your motorcycle thoroughly checked at a qualified service
facility as soon as possible. Also, be sure to have your Honda dealer check the
frame and suspension after any serious crash.
If your motorcycle cannot be ridden, see
page .210
08/07/15 10:26:17 31MCA680 0242 
key number plate
236
If You Lose Your Key
Taking Care of the Unexpected
Be sure to record your key number in the Quick Reference section at the rear of
the manual. You’ll need this number to have a duplicate key made.
A lost key won’t be a problem if you take preventative action. Store one
duplicate key in a safe place at home and carry a second duplicate in your wallet.
If you lose your key and aren’t carrying a duplicate, either get your spare or
have one made. If you don’t know your key number, call the dealer where you
purchased your Honda. They may have it listed in their records. If they don’t,
transport your motorcycle to them or the nearest Honda dealer. The dealer will
probably have to remove the ignition switch assembly to find the key number so
they can make a key for you.
You should receive a key number plate with your keys. Store this plate in a safe
place.
08/07/15 10:26:23 31MCA680 0243 
237
If Your Battery Is Low (or Dead)
Taking Care of the Unexpected
Jump starting is not recommended, especially if you use an automobile
battery. The greater amperage of an automobile battery when the car
engine is running can damage your motorcycle’s electrical system.
Bump starting is also not recommended.
If you can’t charge the battery or it appears unable to hold a charge, contact your
Honda dealer.
08/07/15 10:26:27 31MCA680 0244 
238
Taking Care of the Unexpected
08/07/15 10:26:30 31MCA680 0245 
239
Technical Information
Technical Information
This section contains dimensions, capacities, and other technical data, plus
information on government requirements and how to break-in your
motorcycle.
.................................Tire Pressure Monitoring System (TPMS) Explanation .
......................................................................................Vehicle Identification .
...................................................................................................Specifications .
.........................................................................................Break-in Guidelines .
...............................................................................Emission Control Systems .
.........................................................................................Catalytic Converters .
.............................................................................................Oxygenated Fuels .
240
242
248
249
251
255
256
08/07/15 10:26:37 31MCA680 0246 
LEFT SIDE RIGHT SIDE
RIGHT SIDE
VIN
engine number
VIN
240
Serial Numbers
Technical Information
Vehicle Identification
The VIN and engine serial number are required when you register your
motorcycle. They may also be required when ordering replacement parts. You
may record these numbers in the Quick Reference section at the rear of this
manual.
The VIN (vehicle identification number) is stamped on the right side of the
steering head and also appears on the Safety Certification Label attached to the
left side of the steering head.
The engine number is stamped on the right side of the crankcase.
08/07/15 10:26:44 31MCA680 0247 
color label
(models not equipped with Airbag)
color label
(models equipped with Airbag)
241
Color Label & Code
Technical Information
Vehicle Identification
The color code is helpful when ordering replacement parts. You may record the
color and code in the Quick Reference section at the rear of this manual.
The color label is attached inside the fuel filler compartment lid.
08/07/15 10:26:50 31MCA680 0248 
66.5 in (1,690 mm)
57.3 in (1,455 mm)
37.2 in (945 mm)
103.7 in (2,635 mm)
4.9 in (125 mm)
unleaded gasoline, pump octane number of
86 or higher
6.6 US gal (25
)
4.9 US qt (4.6
)
3.8 US qt (3.6
)
3.9 US qt (3.7
)
API Service Classification SG or higher
except oils labeled as energy conserving on
the circular API service label, SAE 10W-30,
JASO T 903 standard MA,
Pro Honda GN4 4-stroke oil (USA & Canada)
or Honda 4-stroke oil (Canada only), or an
equivalent motorcycle oil
after disassembly:
after draining:
after draining & oil filter change:
overall length
overall width
overall height
wheelbase
ground clearance
fuel
recommendation
fuel tank capacity
engine oil capacity
engine oil
recommendation
Dimensions
Fuel & Lubricants
242
Technical Information
Specifications
08/07/15 10:27:04 31MCA680 0249 
4.1 US oz (120 cm )
4.07 US qt (3.85
)
Operator and one passenger
410 lbs (186 kg)
419 lbs (190 kg)
rider, passenger, all cargo and accessories
20.0 lbs (9.0 kg)
20.0 lbs (9.0 kg)
4.5 lbs (2.0 kg)
1.0 lbs (0.5 kg)
71 lbs (32 kg)
66 lbs (30 kg)
4.5 lbs (2.0 kg)
(Models equipped with
Airbag)
(Models not equipped
with Airbag)
cooling system,
recommendation
Pro Honda HP Coolant or an equivalent high
quality ethylene glycol antifreeze containing
corrosion protection inhibitors specifically
recommended for use in aluminum engines
cooling system,
capacity
passenger
capacity
maximum weight
capacity
cargo capacity
final drive oil
capacity
after draining:
(Canada only)
travel trunk:
each saddlebag:
each fairing pocket (Models not equipped
with Airbag):
fairing pocket (Models equipped with
Airbag):
each trunk side pocket:
total of all cargo:
Fuel & Lubricants (Cont’d)
Capacities
243
Technical Information
Specifications
08/07/15 10:27:18 31MCA680 0250 
××
−−
±
111.8 cu-in (1,832 cm
)
2.91 2.80 in (74.0 mm 71.0 mm)
9.8 : 1
BKR6E-11 (NGK)
K20PR-U11 (DENSO)
BKR5E-11 (NGK)
K16PR-U11 (DENSO)
BKR7E-11 (NGK)
K22PR-U11 (DENSO)
0.006 in (0.15 mm)
0.009 in (0.22 mm)
0.039 0.043 in (1.00 1.10 mm)
700 70 rpm
1.591
shaft
0.686
0.843
1.068
1.454
2.375
2.750
1.028
or
or
or
(No adjustment)
displacement
bore & stroke
compression ratio
spark plug
(standard)
spark plug
(cold climate)
spark plug (high
speed riding)
valve clearance
(cold)
intake
exhaust
spark plug gap
idle speed
primary reduction
secondary reduction
final reduction
gear ratio, 1st
2nd
3rd
4th
OD
final drive
Engine Specifications
Power Transmission
244
Technical Information
Specifications
08/07/15 10:27:40 31MCA680 0251 
29°15’
4.3 in (109 mm)
130/70R18M/C 63H
1.2 kW/5,000 rpm
12 V 20 Ah
41 psi (280 kPa , 2.80 kgf/cm
)
36 psi (250 kPa , 2.50 kgf/cm
)
180/60R16M/C 74H
DUNLOP D250F
BRIDGESTONE G709 RADIAL
DUNLOP D250
BRIDGESTONE G704 RADIAL
radial, tubeless
tire size, front
trail
caster
generator
battery
tire pressure, rear
(cold)
tire pressure, front
(cold)
tire type
tire size, rear
Chassis & Suspension
Electrical
245
Technical Information
Specifications
08/07/15 10:27:52 31MCA680 0252 
−×
−×
−×
−×
−×
12 V 21/5 W 6
12 V 21/5 W 2
12 V 21 W 2
LED
LED
LED
LED
LED
LED
LED
LED
LED
LED
LED
LED
LED
12 V 55 W 2
12 V 55 W 2
12 V 5 W
LED
(rear)
(front)
(high)
(low)
turn signal lights
brake/tail light
headlight
ABS indicator
CRUISE SET
indicator
CRUISE ON
indicator
overdrive indicator
reverse indicator
PGM-FI indicator
low fuel indicator
side stand indicator
low oil pressure
indicator
high beam indicator
turn signal indicator
neutral indicator
instrument light
license light
AIRBAG indicator
(models equipped
with ABS)
(models equipped
with Airbag)
Lights
246
Technical Information
Specifications
08/07/15 10:28:13 31MCA680 0253 
120 A
30 A
60 A
30 A, 20 A, 15 A, 10 A, 5 A
15 lbf·ft (20 N·m , 2.0 kgf·m)
80 lbf·ft (108 N·m , 11.0 kgf·m)
16 lbf·ft (22 N·m , 2.2 kgf·m)
23 lbf·ft (31 N·m , 3.2 kgf·m)
23 lbf·ft (31 N·m , 3.2 kgf·m)
44 lbf·ft (59 N·m , 6.0 kgf·m)
19 lbf·ft (26 N·m , 2.7 kgf·m)
25 lbf·ft (34 N·m , 3.5 kgf·m)
40 A
(models
equipped with
Premium Audio)
main A
main B
external amplifier
fuse
final drive oil drain
bolt
rear wheel nuts
front wheel axle
pinch bolts
left front wheel
caliper socket bolt
right front wheel
caliper fixing bolts
front wheel axle bolt
engine oil filter
engine oil drain bolt
other fuses
speed limit fuse
Fuses
Torque Specifications
247
Technical Information
Specifications
08/07/15 10:28:29 31MCA680 0254 
248
Technical Information
Break-in Guidelines
Help assure your motorcycle’s future reliability and performance by paying
extra attention to how you ride during the first 300 miles (500 km).
During this period, avoid full-throttle starts and rapid acceleration.
08/07/15 10:28:33 31MCA680 0255 
low tire pressure indicator
249
Technical Information
low tire pressure
indicator
Tire Pressure Monitoring System
(TPMS) Explanation
Both tires should be checked monthly when cold, and inflated to the
inflation pressure recommended by the vehicle manufacturer on the tire
information label.
(If your vehicle has different tires than those indicated on the vehicle tire
information label, you should determine the proper tire inflation pressure
for those tires.)
As an added safety feature, your vehicle has been equipped with a tire
pressure monitoring system (TPMS) that illuminates a
when one or more of your tires significantly under-inflated.
Accordingly, when the low tire pressure indicator illuminates, you should
stop and check your tires as soon as possible, and inflate them to the proper
pressure.
Riding on a significantly under-inflated tire causes the tire to overheat and
can lead to tire failure. Under-inflation also reduces fuel efficiency and tire
tread life, and may affect the vehicle’s handling and stopping ability.
Please note that the TPMS is not a substitute for proper tire maintenance,
and it is the rider’s responsibility to maintain correct tire pressure, even if
under-inflation has not reached the level to trigger illumination of the
TPMS low tire pressure indicator.
08/07/15 10:28:37 31MCA680 0256 
TPMS indicator
250
Tire Pressure Monitoring System
(TPMS) Explanation
Technical Information
Your vehicle has also been equipped with a TPMS indicator to indicate
when the system is not operating properly. The TPMS indicator displays the
symbol ‘‘TPMS’’ when illuminated.
When the TPMS indicator is illuminated, the system may not be able to
detect or signal low tire pressure as intended.
TPMS malfunctions may occur for a variety of reasons, including the
installation of replacement or alternate tires or wheels on the vehicle that
prevent the TPMS from functioning properly.
Always check the TPMS indicator after replacing one or more tires or
wheels on your vehicle to ensure that the replacement or alternate tires and
wheels allow the TPMS to continue to function properly.
08/07/15 10:28:41 31MCA680 0257 
vehicle emission control
information label
vehicle emission control
information label (Canada only)
251
Exhaust Emission Requirements
Warranty Compliance
Noise Emission Requirements
Technical Information
Emission Control Systems
The U.S. Environmental Protection Agency (EPA), the California Air Resources
Board (CARB), and Environment Canada (EC) require that your motorcycle
comply with applicable exhaust emissions standards during its useful life, when
operated and maintained according to the instructions provided.
Compliance with the terms of the Distributor’s Warranties for Honda
Motorcycle Emission Control Systems is necessary in order to keep the
emissions system warranty in effect. (USA only)
The Vehicle Emission Control Information label is attached inside the trunk lid.
The EPA also requires that motorcycles built after January 1, 1983 comply with
applicable noise emission standards for one year or 3,730 miles (6,000 km) after
the time of sale to the ultimate purchaser, when operated and maintained
according to the instructions provided.
08/07/15 10:28:47 31MCA680 0258 
252
Technical Information
Emission Control Systems
PGM-FI System
Ignition Timing Control System
Secondary Air Injection System
Three-Way Catalytic Converters
Source of Exhaust Emissions
Exhaust Emission Control System
The PGM-FI system uses sequential multiport fuel injection. It has four
subsystems: Air Intake, Engine Control, Fuel Control, and Exhaust Control.
The Engine Control Module (ECM) uses various sensors to determine how
much air is going into the engine. It then controls how much fuel to inject under
all operating conditions.
The system constantly adjusts the ignition timing, reducing the amount of HC,
CO and NOx produced.
The secondary air injection system introduces filtered air into the exhaust gases
in the exhaust port. The secondary air injection system helps improve emission
control performance.
The three-way catalytic converters are in the exhaust system. Through chemical
reactions, they convert HC, CO, and NOx in the engine’s exhaust to carbon
dioxide (CO ), nitrogen (N), and water vapor.
The combustion process produces carbon monoxide (CO), oxides of nitrogen
(NOx) and hydrocarbons (HC). Control of hydrocarbons and oxides of nitrogen
is very important because, under certain conditions, they react to form
photochemical smog when subjected to sunlight. Carbon monoxide does not
react in the same way, but it is toxic.
Honda Motor Co., Ltd. utilizes various systems to reduce carbon monoxide,
oxides of nitrogen and hydrocarbons.
The exhaust emission control system includes a PGM-FI system, two three-way
catalytic converters, a secondary air injection system, and two heated oxygen
sensors or two air fuel ratio sensors.
No adjustment to these systems should be made although periodic inspection of
the components is recommended.
2
08/07/15 10:28:54 31MCA680 0259 
253
Technical Information
Emission Control Systems
Evaporative Emission Control System
Crankcase Emission Control System
This motorcycle complies with the requirements of the California Air Resources
Board (CARB) evaporative emission regulations. Fuel vapor from the fuel tank
is directed into the charcoal canister and air cleaner where it is adsorbed and
stored while the engine is stopped. When the engine is running and the purge
control solenoid valve is open, fuel vapor in the charcoal canister and air cleaner
is drawn into the engine through the throttle body.
The engine is equipped with a closed crankcase system to prevent discharging
crankcase emissions into the atmosphere. Blow-by gas is returned to the
combustion chamber through the air cleaner and the intake manifold.
08/07/15 10:28:58 31MCA680 0260 
254
Technical Information
Problems That May Affect Motorcycle Exhaust Emissions
Noise Emission Control System
Fuel Permeation Emission Control System
Emission Control Systems
If you are aware of any of the following symptoms, have the vehicle inspected
and repaired by your authorized Honda motorcycle dealer.
Symptoms:
Hard starting or stalling after starting
Rough idle
Misfiring or backfiring during acceleration
After-burning (backfiring)
Poor performance (driveability) and poor fuel economy
TAMPERING WITH THE NOISE CONTROL SYSTEM IS PROHIBITED:
U. S. federal law prohibits, or Canadian provincial laws may prohibit the
following acts or the causing thereof: ( ) The removal or rendering inoperative
by any person, other than for purposes of maintenance, repair or replacement, of
any device or element of design incorporated into any new vehicle for the
purpose of noise control prior to its sale or delivery to the ultimate purchaser or
while it is in use; or ( ) the use of the vehicle after such device or element of
design has been removed or rendered inoperative by any person.
AMONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPERING ARE
THE FOLLOWING ACTS:
Removal of, or puncturing the muffler, baffles, header pipes or any other
component which conducts exhaust gases.
Removal of, or puncturing of any part of the intake system.
Lack of proper maintenance.
Replacing any moving parts of the vehicle, or parts of the exhaust or intake
system, with parts other than those specified by the manufacturer.
This vehicle complies with the Fuel Permeation Emission Control regulations of
the U.S. Environmental Protection Agency (EPA), the California Air Resources
Board (CARB), and Environment Canada (EC). The fuel tank, fuel hoses, and
fuel vapor charge hoses used on this vehicle incorporate fuel permeation control
technologies. Tampering with the fuel tank, fuel hoses, or fuel vapor charge
hoses to reduce or defeat the effectiveness of the fuel permeation technologies
is prohibited by federal regulations.
1.
2.
3.
4.
1.
2.
3.
4.
5.
1
2
08/07/15 10:29:06 31MCA680 0261 
255
Catalytic Converters
Technical Information
This motorcycle is equipped with two three-way catalytic converters. Each
catalytic converter contains precious metals that serve as catalysts, promoting
chemical reactions to convert the exhaust gasses without affecting the metals.
The catalytic converters act on HC, CO, and NOx. Replacement parts must be
original Honda parts or equivalents.
The catalytic converters must operate at high temperature for the chemical
reactions to take place. They can set fire to any combustible materials that come
near them. Park your motorcycle away from high grasses, dry leaves, or other
flammables.
Defective catalytic converters contribute to air pollution, and can impair your
engine’s performance. Follow these guidelines to protect your motorcycle’s
catalytic converters.
Always use unleaded gasoline. Even a small amount of leaded gasoline can
contaminate the catalyst metals, making the catalytic converters ineffective.
Keep the engine in good running condition.
A poorly running engine can cause the catalytic converter to overheat causing
damage to the converter or the motorcycle.
If your engine is misfiring, backfiring, stalling, or otherwise not running
properly, stop riding and turn off the engine. Have your motorcycle serviced
as soon as possible.
08/07/15 10:29:10 31MCA680 0262 
256
Oxygenated Fuels
Technical Information
Oxygenated fuels can damage paint and plastic. Damage caused by spilled fuel
is not covered by warranty.
Some conventional gasolines are being blended with alcohol or an ether
compound. These gasolines are collectively referred to as oxygenated fuels. To
meet clean air standards, some areas of the United States and Canada use
oxygenated fuels to help reduce emissions.
If you use an oxygenated fuel, be sure it is unleaded and meets the minimum
octane rating requirement.
Before using an oxygenated fuel, try to confirm the fuel’s contents. Some states/
provinces require this information to be posted on the pump.
The following are the EPA-approved percentages of oxygenates:
ETHANOL (ethyl or grain alcohol) 10% by Volume
You may use gasoline containing up to 10% ethanol by volume. Gasoline
containing ethanol may be marketed under the name ‘‘Gasohol’’.
MTBE (Methyl Tertiary Butyl Ether) 15% by Volume
You may use gasoline containing up to 15% MTBE by volume.
METHANOL (methyl or wood alcohol) 5% by Volume
You may use gasoline containing methanol containing up to 5% methanol by
volume as long as it also contains cosolvents and corrosion inhibitors to
protect the fuel system. Gasoline containing more than 5% methanol by
volume may cause starting and/or performance problems. It may also damage
metal, rubber, and plastic parts of your fuel system.
If you notice any undesirable operating symptoms, try another service station or
switch to another brand of gasoline.
Fuel system damage or performance problems resulting from the use of an
oxygenated fuel containing more than the percentages of oxygenates mentioned
above are not covered under warranty.
Oxygenated fuels can damage paint and plastic. Be careful not to spill fuel when
filling the fuel tank. Wipe up any spills immediately.
08/07/15 10:29:19 31MCA680 0263 
257
Consumer Information
Consumer Information
This section contains information on your warranty and how to get an official
Honda Service Manual.
.........................................................................................Authorized Manuals .
..........................................................................................Warranty Coverage .
..............................................................................................Warranty Service .
.............................................................................................Contacting Honda .
..........................................................................................Your Honda Dealer .
..............................................................The Honda Rider’s Club (USA only) .
.............................................................Reporting Safety Defects (USA only) .
258
261
262
263
264
265
266
08/07/15 10:29:27 31MCA680 0264 
$75.00
$60.00
$48.00
$16.00
$16.00
$16.00
$14.00
2009 GL1800 Service Manual/ETM
2009 GL1800 SM/ETM CD ROM
Common Service Manual
2009 GL1800 Owner’s Manual
2009 GL1800 Navigation System Manual
2009 GL1800 Owner’s Manual Airbag
Supplement
2009 GL1800 Airbag Brochure
61MCA54
61MCAC53
61CM002
31MCA680
31MCAT30
31MCAU30
31MCAV10
(Also available for Models equipped with Airbag)
Publication Item No. Description Price Each
Publication Item No. Description Price Each
Prices are subject to change without notice and without incurring obligation.
Prices are subject to change without notice and without incurring obligation.
258
Authorized Manuals
Consumer Information
The Service Manual used by your authorized Honda dealer is available from
Helm, Inc. (USA only, Canada: See your Honda dealer to order authorized
manuals.)
Also available but not necessary to service your model is the Honda Common
Service Manual which explains theory of operation and basic service
information for various systems common to all Honda motorcycles, motor
scooters and ATVs.
These Honda manuals are written for the professional technician, but most
mechanically capable owners should find them easy to use if they have the
proper tools and observe proper safety standards. Special Honda tools are
necessary for some procedures.
08/07/15 10:29:38 31MCA680 0265 
−−
Orders are mailed within 10 days. Please allow adequate time
for delivery.
Prices are subject to change without notice and without incurring
obligation.
Publication
Item No.
Item Description Qty. Total
Price
Sub Total
Purchaser’s Sales Tax
Mich. add 6 %
Calif. add 7.25 %
Handling Charge
Grand Total
$3.75
Price Each
259
Consumer Information
Order On-Line: www.helminc.com
Order Toll Free: 1-888-CYCLE93
OR
Authorized Manuals
(NOTE: For Credit Card Orders Only)
(1-888-292-5393)
Monday Friday 8:00 AM 6:00 PM EST
By completing this form you can order the materials desired. You can pay by
check or money order, or charge to your credit card. Mail to Helm, Inc. at the
address shown on the back of this order form (USA only).
Canada: See your Honda dealer to order authorized manuals.
08/07/15 10:29:49 31MCA680 0266 
NOTE: Dealers and Companies please provide dealer or company name, and also the name of the person to
whose attention the shipment should be sent.
Daytime Telephone Number
City
Street address/P. O. BOX
State Zip Code
Apartment Number
Attention
Customer Name
Customer Signature Date
Check or money order enclosed payable to Helm Inc. U.S. funds only. Do not send cash.
Check here if your billing address is different from the shipping address shown above.
MasterCard
Account Number
VISA Discover
Expiration: Mo. Yr.
These Publications cannot be returned for credit without receiving advance authorization within 14 days of delivery. For returns, a
restocking fee may be applied against the original order.
Security Code
()
P.O. BOX 07280, DETROIT, MICHIGAN 48207
HELM
P
A
Y
M
E
N
T
S
H
I
P
T
O
260
Consumer Information
08/07/15 10:30:03 31MCA680 0267 
261
Warranty Coverage
Consumer Information
Your new Honda is covered by these warranties:
Motorcycle Limited Warranty
Emission Control System Warranty
Noise Control Warranty
There are responsibilities, restrictions, and exclusions which apply to these
warranties. Please read the Warranties Booklet given to you by your Honda
dealer at the time of purchase. Be sure to keep your Honda owner’s card with
your Warranties Booklet (USA only).
It is important to realize that your warranty applies to defects in material or
workmanship of your Honda. Your warranty coverage does not apply to normal
wear or deterioration associated with using the motorcycle.
Your warranty coverage will not be voided if you choose to perform your own
maintenance. However, you should have the proper tools and service
information and be mechanically qualified. Failures that occur due directly to
improper maintenance are not covered.
Almost all of your warranty coverage can be extended through the Honda
Protection Plan (USA only). For more information, see your Honda dealer.
08/07/15 10:30:10 31MCA680 0268 
262
Warranty Service
Consumer Information
Please remember that recommended maintenance interval servicing is not
included in your warranty coverage. Additionally, your warranty does not apply
to the normal wear of items (such as brakes, tires, etc.).
If you believe you have a problem with your motorcycle, call the service
department of your Honda dealer. Make an appointment for an inspection and
diagnosis. Remember, as the owner of the motorcycle, you will be asked to
authorize that inspection. Your dealer will give you the results of the inspection.
If the problem is covered under warranty, your dealer will perform the warranty
repairs for you.
If you have questions about warranty coverage or the nature of the repair, it is
best to talk to the Service Manager of your Honda dealer.
Sometimes, in spite of the best intentions of all concerned, a misunderstanding
may occur. If you aren’t satisfied with your dealer’s handling of the situation,
we suggest you discuss your problem with the appropriate member of the
dealership’s management team. If the problem has already been reviewed with
the Service Manager, Parts Manager, Sales Manager, etc., contact the Owner of
the dealership or their designated representative.
08/07/15 10:30:15 31MCA680 0269 
263
Contacting Honda
Consumer Information
Your owner’s manual was written to cover most of the questions you might ask
about your Honda. Any questions not answered in the owner’s manual can be
answered by your Honda dealer. If your dealer doesn’t have the answer right
away, they will get it for you.
If you have a difference of opinion with your dealer, please remember that each
dealership is independently owned and operated. That’s why it’s important to
work to resolve any differences at the dealership level.
If you wish to comment on your experiences with your Honda or with your
dealer, please send your comments to the following address (USA only):
Motorcycle Division, American Honda Motor Co., Inc., P.O. Box 2200,
Torrance, CA 90509-2200, mailstop: 100-4C-7B, telephone: (866) 784-1870.
Canada: Refer to the Warranties Booklet that was supplied with your vehicle.
Please include the following information in your letter:
name, address, and telephone number
product model, year, and VIN
date of purchase
dealer name and address
We will likely ask your Honda dealer to respond, or possibly acknowledge your
comments directly.
08/07/15 10:30:21 31MCA680 0270 
264
Your Honda Dealer
Consumer Information
Once you purchase your new Honda, get familiar with the organization of your
Honda dealer so you can utilize the full range of services available.
The service department is there to perform regular maintenance and unexpected
repairs. It has the latest available service information from Honda. The service
department will also handle warranty inspections and repairs.
The parts department offers Honda Genuine Parts, Pro Honda products, Honda
Genuine Accessories (USA only), and Honda accessories and products (Canada
only). The same quality that went into your Honda can be found in Honda
Genuine replacement parts. You’ll also find comparable quality in the
accessories and products available from the parts department.
The sales department offers the Honda Protection Plan to extend almost all of
your warranty coverage (USA only).
Your Honda dealer can inform you about competition and other riding events in
your area. You’ll also find that your dealer is a source of information about
American Honda’s Rider Education Centers and the Honda Rider’s Club of
America (USA only).
We’re sure you’ll be as pleased with the service your Honda dealer continues to
provide after the sale as you are with the quality and dependability of your
Honda.
08/07/15 10:30:27 31MCA680 0271 
265
The Honda Rider’s Club (USA only)
Consumer Information
www.hrca.honda.com.
You may be eligible for a Honda Rider’s Club of America (HRCA) membership
with the purchase of your new Honda. You can log on to the HRCA Clubhouse
website for details at
08/07/15 10:30:31 31MCA680 0272 
266
Reporting Safety Defects (USA only)
Consumer Information
http://www.safercar.gov
http://www.safercar.gov.
If you believe that your vehicle has a defect which could cause a crash or
could cause injury or death, you should immediately inform the National
Highway Traffic Safety Administration (NHTSA) in addition to notifying
American Honda Motor Co., Inc.
If NHTSA receives similar complaints, it may open an investigation, and if
it finds that a safety defect exists in a group of vehicles, it may order a
recall and remedy campaign. However, NHTSA cannot become involved in
individual problems between you, your dealer, or American Honda Motor
Co., Inc.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at
1-888-327-4236
(TTY: 1-800-424-9153); go to
; or write to: Administrator, NHTSA, 1200 New
Jersey Avenue, SE., Washington, DC 20590.
You can also obtain other information about motor vehicle safety from
08/07/15 10:30:36 31MCA680 0273 
267
Consumer Information
08/07/15 10:30:38 31MCA680 0274 
268
Table of Contents
Table of Contents
....................................................................INSTRUMENTS & CONTROLS .
...............................................................................MOTORCYCLE SAFETY . 1
11
The following presents the contents of each section of your owner’s manual.
..............................................................................Important Safety Information .
...............................................................................Accessories & Modifications .
........................................................................................................Safety Labels .
.........................................................................Operation Component Locations .
.............................................................................................Gauges & Indicators .
...................................................................................Multi Information Display .
.............................................................................Opening/Ending Ceremony .
................................................................On/Off-Opening/Ending Ceremony .
...........................................Special Message for Opening/Ending Ceremony .
.........................................................................................Odometer/Tripmeter .
................................Switch the Day Mode Display and Night Mode Display .
.....................................................................Display Illumination Adjustment .
....................................................................................................Digital Clock .
....................................................................................Air Temperature Meter .
...................................................Travel Trunk & Saddlebags Open Indicator .
....................................................................................Display Type Selection .
..................................................................Changing the Information Display .
..............................................................................................Controls & Features .
.................................................................................................Ignition Switch .
...................................................................................Cruise Control Switches .
.....................................................................................Reverse (RVS) Switch .
...............................................................................Headlight Dimmer Switch .
...........................................................................................Turn Signal Switch .
......................................................................................................Horn Button .
...................................................................................Audio Control Switches .
..................................................................................................Hazard Switch .
..................................................................Headlight Beam Adjustment Knob .
....................................Rear Suspension Spring Pre-load Adjustment Switch .
.........................................................................................Ventilation Controls .
.......................................................................Windscreen Height Adjustment .
..........................................................................................Engine Stop Switch .
........................................................................................Start/Reverse Button .
2
4
6
12
16
22
23
24
25
27
28
29
31
32
33
34
35
37
37
38
39
39
39
40
40
40
40
41
42
42
42
42
08/07/15 10:31:01 31MCA680 0275 
269
Table of Contents
Table of Contents
..............................................................................................BEFORE RIDING .43
......................................................................................Are You Ready to Ride? .
............................................................................................Protective Apparel .
..................................................................................................Rider Training .
....................................................................Is Your Motorcycle Ready to Ride? .
...........................................................................................Pre-ride Inspection .
....................................................................................Load Limits & Guidelines .
.............................................................................................................Loading .
......................................................................................................Load Limits .
..........................................................................................Loading Guidelines .
.............................................................................................Cargo Compartment .
.............................................................................Travel Trunk & Saddlebags .
..........................................................................................Remote Transmitter .
.................................................................................................Fairing Pockets .
..........................................................................................Trunk Side Pockets .
..................................................................Comfort & Convenience Adjustment .
.......................................................................Windscreen Height Adjustment .
.......................................................................Windscreen Ventilation Louver .
.................................................................................Side Ventilation Louvers .
...................................................................Foot Warmer Ventilation Louvers .
...............................................................................................Handgrip Heater .
.......................................................................................................Seat Heater .
...........................................................................................................Accessories .
.............................................................................Accessory (ACC) Terminal .
44
44
46
47
47
49
49
50
51
52
52
56
60
61
62
63
64
65
66
67
68
69
69
08/07/15 10:31:17 31MCA680 0276 
270
Table of Contents
Table of Contents
....................................................................BASIC OPERATION & RIDING .
.............................................................................................AUDIO SYSTEMS .
71
97
.......................................................................................Safe Riding Precautions .
...........................................................................Starting & Stopping the Engine .
........................................................................................................Preparation .
............................................................................................Starting Procedure .
................................................................................................Flooded Engine .
..................................................Bank Angle Sensor Ignition Cut-off System .
...................................................................................How to Stop the Engine .
.......................................................................................................Shifting Gears .
.....................................................................................While You Are Riding .
.................................................................................................Riding in Reverse .
.................................................................................................................Braking .
......................................................................Anti-Lock Brake System (ABS) .
.........................................................................................ABS Indicator Light .
..........................................................Tire Pressure Monitoring System (TPMS) .
.............................................................................Low Tire Pressure Indicator .
......................................Tire Pressure Monitoring System (TPMS) Indicator .
............................................................................Changing a Tire with TPMS .
..................................................................................................................Parking .
......................................................................................Theft-prevention Tips .
........................................................................Riding with a Passenger or Cargo .
..................................................................................Riding with Cruise Control .
..................................................................................................Cruise Control .
.......................................................................................To Set Cruise Control .
.................................................................................To Change the Set Speed .
................................................................................To Cancel Cruise Control .
.........................................................................................Riding in Bad Weather .
......................................................................................................Audio Systems .
........................................................................MODE Knob/Button Function .
...............................................................VOLUME Knob/Button Function .
........................................................................................Display Locations .
.......................................................................................Controls Locations .
.......................................................................Audio Component Locations .
.............................................................................................System Control .
72
73
73
74
74
75
75
76
77
78
80
82
83
85
86
87
88
89
91
92
93
93
94
94
95
96
99
99
100
101
103
105
106
08/07/15 10:31:39 31MCA680 0277 
271
Table of Contents
Table of Contents
...............................................................................................Switch Output .
.......................................................................................VOLUME Control .
................................................................................................Tone Control .
................................................................................................Fader Control .
........................................................................................Ambience (AMB) .
........................................................................................................Beep Set .
......................................................................Auto Volume Control (AVC) .
..........................................................................................................Muting .
..................................................................................................AM/FM Radio .
..............................................................................................Radio Antenna .
...................................................................................................Select Band .
................................................................................................Select Station .
..............................................................................................Preset Stations .
...................................................................................................Auto Select .
...............................................................Receiving Satellite Radio Service .
..............................................................................Operating the XM Radio .
......................................................................XM Radio Display Messages .
..............................................................................................Select Channel .
..............................................................................................Preset Channel .
........................................................................................Weather Information .
....................................................................................Weather Band (WB) .
...........................................................................................Auxiliary Function .
................................................................................Auxiliary (AUX) Input .
...........................................................................................Input Jack Setup .
.............................................................................................System Control .
.......................................................................................VOLUME Control .
...........................................................................................Intercom Muting .
...............................................................................Intercom (I-COM) System .
.............................................................................................System Control .
...........................................................................................Navigation System .
...............................................................................................Switch Output .
...................................................................................Navi Volume Control .
.....................................................................................XM Radio (USA only) .
107
108
109
111
112
113
114
115
116
116
117
118
119
120
121
121
124
124
125
126
127
127
129
129
130
132
132
133
134
135
135
135
136
08/07/15 10:32:01 31MCA680 0278 
272
Table of Contents
......................................................................SERVICING YOUR HONDA .
137
Before You Service Your Honda
Service Preparations
Service Procedures
......................................................................The Importance of Maintenance .
..........................................................................................Maintenance Safety .
.......................................................................................Periodic Maintenance .
.....................................................................................Maintenance Schedule .
........................................................................................Maintenance Record .
.......................................................................Important Safety Precautions .
................................................................Maintenance Component Locations .
....................................................................................................Clip Removal .
.................................................................................................Cover Removal .
.................................................................................Owner’s Manual Storage .
............................................................................................................Tool Kit .
..............................................................................................Appearance Care .
..............................................................................................................Battery .
Electrical
.........................................................................................................Side Stand .
..................................................................................................................Tires .
...............................................................................................................Brakes .
........................................................................................................Suspension .
Chassis
.......................................................................................................Spark Plugs .
...................................................................................................Clutch System .
Engine
..................................................................................................Final Drive Oil .
..........................................................................................Crankcase Breather .
.............................................................................................................Coolant .
...........................................................................................Engine Oil & Filter .
...................................................................................................................Fuel .
Fluids & Filters
140
141
142
143
144
148
149
152
153
154
159
160
163
170
173
174
176
178
180
184
189
196
197
201
08/07/15 10:32:22 31MCA680 0279 
273
Table of Contents
Table of Contents
.................................................................................................................TIPS .
................................................TAKING CARE OF THE UNEXPECTED .
..................................................................TECHNICAL INFORMATION .
...................................................................CONSUMER INFORMATION .
207
213
239
257
.........................................................................................Storing Your Honda .
........................................................................Transporting Your Motorcycle .
...................................................................................You & the Environment .
...........................................................................................General Guidelines .
...............................................................If Your Engine Quits or Won’t Start .
....................................................................................If You Have a Flat Tire .
................................................................................If Your Engine Overheats .
.........................................................If the Low Oil Pressure Indicator Lights .
.................................................................................................IfaFuseBlows .
.....................................................................................................If You Crash .
.....................................................................................If You Lose Your Key .
....................................................................If Your Battery Is Low (or Dead) .
......................................................................................Vehicle Identification .
...................................................................................................Specifications .
.........................................................................................Break-in Guidelines .
.................................Tire Pressure Monitoring System (TPMS) Explanation .
...............................................................................Emission Control Systems .
.........................................................................................Catalytic Converters .
.............................................................................................Oxygenated Fuels .
.........................................................................................Authorized Manuals .
..........................................................................................Warranty Coverage .
..............................................................................................Warranty Service .
.............................................................................................Contacting Honda .
..........................................................................................Your Honda Dealer .
..............................................................The Honda Rider’s Club (USA only) .
.............................................................Reporting Safety Defects (USA only) .
208
210
211
214
215
218
229
231
232
235
236
237
240
242
248
249
251
255
256
258
261
262
263
264
265
266
08/07/15 10:32:41 31MCA680 0280 
274
Table of Contents
Table of Contents
..............................................................................TABLE OF CONTENTS .
.............................................................................................................INDEX .
QUICK REFERENCE
268
276
08/07/15 10:32:46 31MCA680 0281 
275
Table of Contents
08/07/15 10:32:49 31MCA680 0282 
276
Index
Index
A
B
C
........................................................................................ABS indicator light . 20, 83
.............................................................................................................accessories . 4
...................................................................................accessory (ACC) terminal . 69
................................................................................................air pressure, tires . 190
..........................................................................................air temperature meter . 32
............................................................................American Honda, contacting . 263
....................................................................................................antenna, radio . 116
.........................................................................Anti-Lock Brake System (ABS) . 82
...............................................................................................apparel, protective . 44
.................................................................................................appearance care . 201
.......................................................................................................audio systems . 97
............................................................................................authorized manuals . 258
................................................................................................................battery . 197
brakes,
................................................................................................................fluid . 185
.........................................................................................................pad wear . 187
.................................................................................................................braking . 80
............................................................................................break-in guidelines . 248
.....................................................................................................capacity, fuel . 161
................................................................................................care, appearance . 201
............................................................................................catalytic converters . 255
.................................................................................cleaning, appearance care . 201
.....................................................................................................clutch system . 176
..........................................................................................................color label . 241
.................................................................comfort and convenience adjustment . 62
compartment,
.............................................................................................owner’s manual . 153
............................................................................................................tool kit . 152
08/07/15 10:32:54 31MCA680 0283 
277
Index
Index
D
E
F
(cont’d)
.....................................................................................................fairing pockets . 60
.....................................................................................................final drive oil . 174
...............................................................................................................flat tire . 218
.....................................................................................................flooded engine . 74
....................................................................................................defects, safety . 266
......................................................................................digital clock adjustment . 31
.........................................................................................................drive, final . 174
.......................................................................................consumer information . 257
..............................................................................................controls & features . 37
................................................................................................................coolant . 170
............................................................................coolant temperature gauge . 16, 21
.............................................................................................crankcase breather . 173
.......................................................................................................cruise control . 93
................................................................................................customer service . 263
...................................................................................emission control systems . 251
engine,
.............................................................................................................flooded . 74
.............................................................................................low oil pressure . 231
...........................................................................................................number . 240
...................................................................................................................oil . 163
........................................................................................................overheats . 229
...........................................................................................................pinging . 160
.............................................................................................................starting . 73
.......................................................................................................stop switch . 38
...........................................................................................................stopping . 75
......................................................................................................won’t start . 215
.......................................................................................................environment . 211
08/07/15 10:33:01 31MCA680 0284 
278
Index
Index
G
H
I
fuel,
..........................................................................................................gauge . 16, 21
.....................................................................................................oxygenated . 256
............................................................................................recommendation . 160
..................................................................................................tank capacity . 161
...................................................................................................................fuses . 232
...............................................................................................................gasohol . 256
..............................................................................................................gasoline . 160
.............................................................................................gauges & indicators . 16
.......................................................................................................hazard switch . 41
..................................................................................headlight beam adjustment . 42
.....................................................................................headlight dimmer switch . 40
heater,
...........................................................................................................handgrip . 67
...................................................................................................................seat . 68
.......................................................................................................helmet holder . 90
.......................................................................................high beam indicator . 16, 20
Honda,
......................................................................................................contacting . 263
...................................................................................................Rider’s Club . 265
.............................................................................................................dealer . 264
......................................................................................Honda Service Manual . 258
...........................................................................................................horn button . 40
........................................................................................identification, vehicle . 240
ignition cut-off system,
.........................................................................................................side stand . 73
............................................................................................bank angle sensor . 75
.....................................................................................................ignition switch . 37
..............................................................................................................indicators . 16
..............................................................................................inspection, pre-ride . 47
08/07/15 10:33:07 31MCA680 0285 
279
Index
Index
K
L
M
N
..............................................................................................................key, lost . 236
...............................................................................................................kit, tool . 152
...................................................................................................numbers, serial . 240
maintenance,
......................................................................................component locations . 149
.....................................................................................................importance . 140
..........................................................................................................periodic . 143
.............................................................................................................record . 148
..............................................................................................................safety . 141
.........................................................................................................schedule . 144
..................................................................................................manual, service . 258
............................................................................................manual, authorized . 258
........................................................................................maximum weight limit . 50
.........................................................................................................modifications . 5
....................................................................................multi information display . 22
..........................................................................................................labels, safety . 6
...........................................................................................................lamp check . 17
.........................................................................................................limit, weight . 50
............................................................................................................load limits . 50
................................................................................................loading guidelines . 51
........................................................................................................lock, steering . 89
...................................................................................low tire pressure indicator . 86
08/07/15 10:33:13 31MCA680 0286 
280
Index
Index
O
P
R
.....................................................................................................radio antenna . 116
radio,
..........................................................................................................AM/FM . 116
.................................................................................................................XM . 121
................................................................................................remote transmitter . 56
removal,
.................................................................................................................clip . 159
................................................................................cylinder head side cover . 157
...........................................................................................engine side cover . 156
...........................................................................................front lower cover . 158
.......................................................................................................side cover . 155
.................................................................................................................parking . 89
..................................................................................................pinging, engine . 160
........................................................................................................plugs, spark . 178
pockets,
..............................................................................................................fairing . 60
.........................................................................................................trunk side . 61
........................................................................pre-load, rear suspension spring . 181
...............................................................................................pre-ride inspection . 47
........................................................................................problems, unexpected . 213
................................................................................................protective apparel . 44
..............................................................................................................odometer . 27
oil,
.............................................................................................................engine . 163
......................................................................................................final drive . 174
...................................................................................................low pressure . 231
...........................................................................operation component locations . 12
........................................................................................overdrive indicator . 16, 18
.................................................................................................overheat, engine . 229
.....................................................................................owner’s manual storage . 153
................................................................................................oxygenated fuels . 256
08/07/15 10:33:19 31MCA680 0287 
281
Index
Index
S
(cont’d)
reverse,
...............................................................................................................button . 37
............................................................................................................riding in . 78
.........................................................................................system indicator . 16, 18
.....................................................................................reporting safety defects . 266
....................................................................................................rider training . 2, 46
..........................................................................................Rider’s Club, Honda . 265
riding,
......................................................................................................bad weather . 96
.................................................................................................basic operation . 71
............................................................................................................clothing . 44
..................................................................................................................safety . 2
............................................................................................safety precautions . 72
...........................................................................................with cruise control . 93
...................................................................................with passenger or cargo . 92
.............................................................................................................saddlebag . 52
safety,
....................................................................................important precautions . 142
..................................................................................................................lables . 6
............................................................................................reporting defects . 266
............................................................................................riding precautions . 72
.......................................................................................schedule, maintenance . 144
....................................................................................................serial numbers . 240
service,
.........................................................................................................customer . 263
..........................................................................................................manuals . 258
.........................................................................................................warranty . 262
.......................................................................................................shifting gears . 76
...........................................................................................................side stand . 196
.......................................................................side stand ignition cut-off system . 73
........................................................................................side stand indicator . 16, 20
........................................................................................................spark knock . 160
.........................................................................................................spark plugs . 178
.....................................................................................................specifications . 242
08/07/15 10:33:24 31MCA680 0288 
282
Index
Index
T
...................................................................................................speedometer . 16, 17
..........................................................................................................stand, side . 196
..............................................................................................start/reverse button . 39
starting,
...............................................................................................................engine . 74
..............................................................................................troubleshooting . 215
.........................................................................................................steering lock . 89
..............................................................................................stop switch, engine . 38
....................................................................................................stopping engine . 75
storage,
.....................................................................................................motorcycle . 208
.............................................................................................owner’s manual . 153
suspension,
.......................................................................................rear spring pre-load . 181
switch,
............................................................................................audio control . 40, 103
.............................................................................................cruise control . 39, 94
.......................................................................................................engine stop . 38
...............................................................................................................hazard . 41
.............................................................................................headlight dimmer . 40
.............................................................................................................ignition . 36
...........................................rear suspension spring pre-load adjustment . 42, 181
........................................................................................................reverse . 39, 78
........................................................................................................turn signal . 40
.....................................................................................................tachometer . 16, 17
............................................................................................theft-prevention tips . 91
tires,
.....................................................................................................air pressure . 190
..................................................................................................................flat . 218
........................................................................................................replacing . 194
............................................................tire pressure monitoring system (TPMS) . 85
......................................tire pressure monitoring system (TPMS) explanation . 249
............................................tire pressure monitoring system (TPMS) indicator . 87
................................................................................................................tool kit . 152
...................................................................................................training, rider . 2, 46
............................................................................transporting your motorcycle . 210
08/07/15 10:33:29 31MCA680 0289 
283
Index
Index
V
W
warranty,
.........................................................................................................coverage . 261
.........................................................................................................extended . 261
............................................................................................................service . 262
..................................................................................washing your motorcycle . 202
..........................................................................................................weight limit . 50
wheels,
.................................................................................................front removal . 220
...................................................................................................rear removal . 226
..................................................................windscreen height adjustment levers . 63
........................................................................vehicle identification no. (VIN) . 240
................................................................................................ventilation . 64, 65, 66
...........................................................................................................travel trunk . 52
...............................................................................................................tripmeter . 27
...........................................................................................trouble, unexpected . 213
....................................................................................troubleshooting, starting . 215
................................................................................................trunk side pockets . 61
..........................................................................................................trunk, travel . 52
.....................................................................................turn signal indicators . 16, 18
08/07/15 10:33:34 31MCA680 0290 
284
Memo
08/07/15 10:33:37 31MCA680 0291 
285
Memo
08/07/15 10:33:39 31MCA680 0292 
286
Memo
08/07/15 10:33:42 31MCA680 0293 
Quick Reference
Quick Reference
The following is a brief, but important collection of information you need to
know about your Honda. You’ll also find space to record important notes.
The engine of your Honda can be the most expensive component to repair.
Proper maintenance, especially the use of the recommended fluids and filters,
prevents premature wear and damage.
Frequent causes of costly repairs are:
Engine oil –– insufficient quantity, improper oil.
Air cleaner –– dirty, leaking because of improper installation (poor seal).
Record important information on the following page:
VIN
Engine No.
Ignition Key No.
Color Label
Owner’s Name
Address
City/State
Phone
Dealer’s Name
Address
City/State
Phone
Service Mgr.
08/07/15 10:33:48 31MCA680 0294 
6.6 US gal (25 )
410 lbs (186 kg)
419 lbs (190 kg)
71 lbs (32 kg)
66 lbs (30 kg)
130/70R18M/C 63H
DUNLOP D250F
BRIDGESTONE G709 RADIAL
180/60R16M/C 74H
DUNLOP D250
BRIDGESTONE G704 RADIAL
36 psi (250 kPa , 2.50 kgf/cm
)
41 psi (280 kPa , 2.80 kgf/cm
)
(Models not equipped with
Airbag)
(Models equipped with
Airbag)
radial, tubeless
Quick Reference
Quick Reference
Pre-ride
Inspection
Scheduled
Maintenance
Periodic Checks
Fuel/Capacity
Engine Oil
unleaded gasoline, pump octane number 86 or higher
Regular: every 4,000 miles (6,400 km)
Check the following items monthly (page ): tires
& wheels, fluids, lights, fuses, nuts & bolts.
Check the following items each time before you ride
(page ): tires & wheels, leaks, loose parts, lights, throttle,
brakes, indicators, gauges.
API Service Classification SG or higher except oils labeled
as energy conserving on the circular API service label,
SAE 10W-30, JASO T 903 standard MA,
Pro Honda GN4 4-stroke oil or equivalent
Maximum Weight
Capacity
rider, passenger, all cargo and accessories
Tires
Tire Pressure
(cold)
maximum of all cargo:
front:
rear:
front:
rear:
type:
(Canada only)
143
47
08/07/15 10:34:04 31MCA680 0295 
BKR6E-11 (NGK) K20PR-U11 (DENSO)
BKR5E-11 (NGK) K16PR-U11 (DENSO)
BKR7E-11 (NGK)
30 A 120 A 60 A
K22PR-U11 (DENSO)
30 A, 20 A, 15 A, 10 A, 5 A
40 A
Quick Reference
Quick Reference
Spark Plugs
Coolant
ethylene glycol antifreeze (silicate-free) for aluminum
engines in 50/50 solution with Pro Honda HP Coolant or
an equivalent distilled water
Fuses
Hypoid Gear Oil SAE 80Final Drive Oil
standard:
cold climat (below 5°C, 41°F):
high speed riding:
or
or
or
speed limiter:main B:
other:
main A:
(models equipped with Premium Audio):
external amplifier
08/07/15 10:34:15 31MCA680 0296 
Quick Reference
Quick Reference
These symbols are used in Controls & Features section:
SYMBOL COMPONENT
HI headlight dimmer switch
LO headlight dimmer switch
SEE PAGE
turn signal switch
horn button
hazard switch
RUN engine stop switch
OFF engine stop switch
START/REVERSE button
38
38
39
40
40
40
40
41
08/07/15 10:34:25 31MCA680 0297 
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda GL1800 GOLDWING 2009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda GL1800 GOLDWING 2009 in the language / languages: English as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info