529874
71
Zoom out
Zoom in
Previous page
1/95
Next page
SPARK
PLUGS
Recommended
plugs:
Standard:
DPR8EA-9
(NGK)
or
x24EPR-U9
(ND)
For
cold climate:
(Below
5"C/41"F)
DPRTEA-9
(NGK)
or
x22EPR-U9
(ND)
For
extended
high
speed driving:
DPR9EA-9 (NGK)
or
x27EPR-U9
(ND)
1. Disconnect
the
spark
plug
caps.
2. Clea4
any dirt
from
around
the spark
plug
bases.
3. Remove
and discard
the
spark
plugs.
4. Make
sure the new
spark
plug
eap
(1)
is
0.8-0.9
mm
(0.031-0.035
in) using
a wire
type feeler
gauge.
If
adjustment is
necessary,
bend the
side electrode
(2)
carefully.
5. With
the
plug
washers
attached, thread
the
new spark
plugs
in by
hand to
pre-
vent
cross-threading.
6.
Tighten
the spark
plugs
l/2 turn with
a
spark
plug
wrench to compress
the
washer.
7.
Reinstall the spark
plug
caps.
CAUTION:
*
The.sglrk
plug
must be securely tight-
ened. An
improperly
tightened
plug
catl
become
t'ery hot
and
possibly
damage
the
engine.
*
Nerer
use a spark
plug
with an improper
hedt runge.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda GL1100 Interstate 1983 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda GL1100 Interstate 1983 in the language / languages: English as an attachment in your email.

The manual is 12,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info