625322
10
Zoom out
Zoom in
Previous page
1/18
Next page
10
ENGLISH
Air Filter Cleaning
A dirty air filter will restrict air flow to the carburetor, reducing engine
performance. If you operate the tiller in very dusty areas, clean the air
filter more often than specified in the MAINTENANCE SCHEDULE
(page 8).
1. Remove the air filter.
2. Clean the air filter in warm soapy
water [1], rinse, and allow it to dry
thoroughly [2]. Or, clean in
nonflammable solvent and allow it
to dry.
3. Dip the air filter in clean engine oil
[3], and then squeeze out all excess
oil [4]. The engine will be hard to
start or will smoke when started if
too much oil is left in the air filter.
NOTICE
Operating the engine with a dry air
filter will allow dust to enter, causing
engine damage. The air filter must
be oiled after cleaning.
4. Wipe dirt from the air cleaner base
and cover using a moist rag. Be
careful to prevent dirt from entering
the carburetor.
5. Reinstall the air filter and air filter
cover.
Spark Plug Service
Recommended Spark Plug: NGK - CMR5H
NOTICE
An incorrect spark plug can cause engine damage.
1. Use a 4 mm Allen
wrench to loosen the
5 mm hex bolt [1],
and remove the fan
cover [2].
2. Disconnect the spark
plug cap [3], and
remove any dirt from
around the spark
plug area.
3. Remove the spark
plug [4] with a
5/8-inch spark plug
wrench.
4. Inspect the spark plug.
Replace it if the electrodes
are worn, or if the insulator
is cracked or chipped.
5. Measure the spark plug
electrode gap with a
suitable gauge.
GAP: 0.60 ~ 0.70 mm
Correct the gap, if
necessary, by carefully
bending the side
electrode.
6. Install the spark plug
carefully, by hand, to avoid
cross-threading.
7. After the spark plug seats,
tighten with a 5/8-inch spark
plug wrench to compress
the washer [5].
If reinstalling the used spark
plug, tighten 1/8 ~ 1/4 turn
after the spark plug seats.
If installing a new spark plug,
tighten 1/2 turn after the
spark plug seats.
NOTICE
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
8. Attach the spark plug cap [3].
9. Install the fan cover [2] and 5 mm hex bolt [1] and tighten securely.
Cooling Fin Inspection
Inspect the engine
cooling fins [1]. You
should clean out any dirt
and debris if air is
obstructed from flowing
across the cooling fins.
1. Loosen the 5 mm hex
bolt, and then
remove the fan cover.
2. Remove all dirt and
debris from the
cooling fins.
3. Install the fan cover, and tighten the 5 mm hex bolt securely.
[4]
[3]
[2]
[1]
[1]
[2]
[4]
[3]
[5]
0.60 ~ 0.70 mm
[1]
FG110 EU.book Page 10 Thursday, January 22, 2009 8:14 AM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda FG110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda FG110 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda FG110

Honda FG110 User Manual - German - 18 pages

Honda FG110 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info