624978
36
Zoom out
Zoom in
Previous page
1/52
Next page
SPARK PLUG SERVICE
In order to service the spark plug, you will need a spark plug wrench
(commercially available).
Recommended spark plug:
BPRGHS (NGK)
To ensure proper engine operation, the spark plug must be properly
gapped and free of deposits.
1. Pull the lock levers out and open the top cover.
2. Remove the spark plug cap.
3. Use a spark plug wrench to remove the spark plug.
4.Visually inspect the spark plug. Discard it if the insulator is cracked
or chipped.
5. Measure the plug gap with a feeler gauge.
Correct as necessary by carefully bending the side electrode.
The gap should be:
0.60-0.70 mm (0.024-0.028 in)
6. Attach the plug washer. Thread the plug in by hand to prevent cross-
threading.
7.Tighten a new spark plug l/2 turn with the wrench to compress the
washer. If you are reusing a plug, it should only take l/8-1/4 turn
after the plug seats.
8. Reinstall the top cover.
psiEi-1
The spark plug must be securely tightened. An improperly tightened
spark plug can become very hot and could damage the engine.
Never use spark plugs which have an improper heat range. Use only
the recommended spark plugs or equivalent.
PLUG WRENCH
PLUG GAP
0.6-0.7 mm
(0.024-0.028 in)
34
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda ES6500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda ES6500 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info