625021
54
Zoom out
Zoom in
Previous page
1/100
Next page
52
SERVICING YOUR GENERATOR
SEALING WASHER
0.028 0.031 in
(0.70 0.80 mm)
Inspect the spark plug. Replace
it if the electrodes are worn or if
the insulator is cracked,
chipped or fouled.
Measure the spark plug
electrode gap with a wire-type
feeler gauge. Correct the gap, if
necessary, by carefully bending
thesideelectrode.
The gap should be:
Make sure that the spark plug sealing washer is in good condition,
and thread the spark plug in by hand prevent cross-threading.
After the spark plug seats, tighten with a 13/16-inch spark plug
wrench to compress the washer.
If reinstalling a used spark plug, tighten 1/8 1/4 turn after the spark
plug seats.
If installing a new spark plug, tighten 1/2 turn after the spark plug
seats.
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
Attach the spark plug cap.
Reinstall the spark plug inspection cover and tighten the cover
screw.
0.028 0.031 in (0.70 0.80 mm)
4.
5.
6.
7.
8.
9.
05/04/25 09:44:50 31Z11600_053
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda EM7000is at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda EM7000is in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info