625009
43
Zoom out
Zoom in
Previous page
1/79
Next page
41
Recommended spark plugs:
Spark Plug Service
SPARK PLUG WRENCH
SPARK PLUG CAP
SEALING WASHER
0.028 0.031 in
(0.7 0.8 mm)
In order to service the spark plug, you will need a spark plug wrench
(commercially available).
BPR5ES (NGK) W16EPR-U (DENSO)
Visually inspect the spark plug.
Discard it if the insulator is
cracked, chipped, or fouled.
Measure the spark plug electrode
gap with a wire-type feeler gauge.
Correct the gap, if necessary, by
carefullybendingtheside
electrode.
The gap should be:
0.028 0.031 in (0.7 0.8 mm)
To ensure proper engine operation, the spark plug must be properly
gapped and free of deposits.
An incorrect spark plug can cause engine damage.
If the engine has been running, let it to cool before servicing the spark
plug.
Remove the spark plug cap.
Clean any dirt from around the spark plug base.
Use a spark plug wrench to remove the spark plug.
1.
2.
3.
4.
5.
,
09/02/10 12:49:49 31Z21600_042
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda EM3800SX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda EM3800SX in the language / languages: English as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info