624996
39
Zoom out
Zoom in
Previous page
1/55
Next page
SPARK
PLUG
SERVICE
In order to service the spark plug, you
will
need
a
spark plug wrench
(commercially available).
Recommended spark plugs:
BPRGES (NGK)
W20EPR-U (DENSO)
To
ensure proper engine operation, the spark plug must be properly
gapped and free of deposits.
If the engine has been running, the muffler
will
be very hot. Be careful
not to touch the muffler.
1.
Remove the spark plug cap.
2. Clean any dirt from around the spark plug base.
3.
Use
a
spark plug wrench to remove the spark plug.
PLUG
WRENCH
SPARK PLUG CAP
4.
Vis
ually
inspect the spark plug. Discard
it
if the insulator is cracked
or chipped. Clean the spark plug with
a
wire brush if
it
is to be
reused.
5.
Measure the plug gap with
a
feeler
0.028-0.031
in
gauge.
Correct as necessary by carefully
bending the side electrode.
The gap should be:
0.028-0.031
in
(0.70-0.80
mm)
(0.70-0.80
mm)
37
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda EG2500X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda EG2500X in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info