473953
14
Zoom out
Zoom in
Previous page
1/28
Next page
14
GENERATING SET USE
OPERATION OF THE GENERATING SET
Your Honda generating set is a reliable piece of equipment,
developed to ensure your safety. It can help you carry out work
more easily and bring improvements to your leisure time, but there
is also a risk of electrocution if you do not follow strictly the
instructions for use given in this chapter.
Never connect the generating set to a main socket.
Do not connect any appliances to the receptacles before starting the generating set.
Do not alter the internal wiring of the generator.
Do not modify the engine adjustments. The frequency and voltage of the current
supplied by the generator are directly linked to the engine rotation speed. These
adjustments are carried out at the factory.
Only connect appliances in good working order: most portable electrical tools are
Class II (double insulation). Equipment that does not meet this standard (tools with
metallic casing) has to powered via 3 conductor cable (with an earth conductor) to
ensure correct earthing in the event of an electrical fault.
Supply only machines whose voltage, as specified on their rating plates,
corresponds to that produced by the generating set.
Protection against electrical shock depends on circuit breakers specially matched
to the generating set. If the circuit breakers require replacement they must be
replaced with a circuit breaker having identical ratings and performance
characteristics.
Due to high mechanical stresses only tough rubber-sheathed flexible cable (in
accordance with IEC 245-4) or the equivalent should be used.
The generating set meets the protective measure "electrical separation with
equipotential bonding" as stated in the IEC 60364-4-41: dec 2005 §413. (and
VDE0100 part 728)
- The used power system is the IT system
- with neutral conductor N (for 3 phase machine) and
- non earthed equipotential bonding conductor PE, connecting all exposed
conductive parts of the generating set together.
- Earthing of the generator is for the proper function of this protective measure not
required.
- Only connect appliances in good working condition; most portable electrical tools
are Class II (double insulation). Equipment that do not meet this standard (tools
with metallic casing) have to be powered via 3-conductor cable (equipotential
conductor PE conductor).
- Earthing the neutral conductor of the generator or any point of the live conductors
(vs coils) like center tap, is in contradiction with the built-in protective measure.
- If the neutral conductor shall be earthed anyway, this may only be performed by
a professional electrician, implementing the additional safety devices required
together with the new protective measure (cf. IEC 364-4-41).
SAFETY
SAFETY
8 9 10
ANGLAIS.book Page 14 Lundi, 18. février 2008 11:11 11
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda ECMT7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda ECMT7000 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda ECMT7000

Honda ECMT7000 User Manual - German - 14 pages

Honda ECMT7000 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info