625092
51
Zoom out
Zoom in
Previous page
1/76
Next page
49
STORAGE
Draining the Fuel Tank and Carburetor
1.Place a suitable gasoline container
below the carburetor.
2.Turn the fuel valve lever to the
OFF position,
loosen the
carburetor drain bolt by turning 1
to 2 turns counterclockwise, and
drain the fuel from the carburetor.
3.Remove the sediment cup (see
page 42), and then turn the fuel
valve lever to the ON position and
dr
ain the fuel
from the fuel tank.
4.After all the fuel has drained into the container, tighten the carburetor
drain
bolt securely.
5.Install the sediment cup and a new O-ring.
6.Turn the fuel valve lever to the OFF position.
Gasoline is highly flammable and
explosive.
You can be burned or seriously
injured when handling fuel.
Stop the engine and keep heat,
sparks
, and flame away.
Handle fuel only outdoors.
Wipe up spills immediately.
CARBURETOR DRAIN BOLT
31Z037210.book 49 ページ 2014年1月27日 月曜日 午後12時2分
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda EB3000c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda EB3000c in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info