Indicator lamp flashing can be activated or
deactivated.
To change the flashing setting, proceed as
follows:
1. Set the ignition switch to ON.
2. Press and hold down button (1) for more
than two seconds. The immobilizer system
(HISS) indicator (2) will start flashing.
The function is enabled.
3. Turn the ignition switch OFF and remove
the key.
When the ignition switch is turned ON, the
indicator light function is deactivated.
If you removed the battery, after you have
refitted it, turn the ON/OFF switch to ON. The
HISS mode is automatically reactivated and
the indicator light flashes.
53
(1)
(2)
(1) Hiss button
(2) Immobilizer system (HISS) indicator
(2)
(1)
CBF600S/SA
CBF600N/NA