564217

Homexpert by Honeywell Rondostat Comfort plus HR30 Manual

9
Zoom out
Zoom in
Previous page
1/12
Next page
- 9 -
Switching
point
Time Temperature
1 6:00 – 9:00
20 °C (Comfort temperature 1)
2 9:00 – 12:00
16 °C (Conserve temperature)
3 12:00 – 13:00
20 °C (Comfort temperature 1)
4 13:00 –17:00
16 °C (Conserve temperature)
5 17:00 – 22:00
22 °C (Comfort temperature 2)
6 22:00 – 6:00
16 °C (Conserve temperature)
• Week program 3 (4 switching points):
Mo – Fr working half-time
Sa – Su like Week program 1
23
1
Conserve
Heating
Heating
20 °C
16 °C
22 °C
4
Switching points
Switching
point
Time Temperature
1. 6:00 to 9:00
20 °C (Comfort temperature 1)
2. 9:00 to 13:00
16 °C (Conserve temperature)
3. 13:00 to
22:00
22 °C (Comfort temperature 2)
4. 22:00 to 6:00
16 °C (Conserve temperature)
Parameter 3 – Backlight
The display has a backlight in order to facilitate reading
of information.
• The backlight is activated when the adjustment dial
moves or a button is pressed.
• The backlight switches off if no action is carried out at
the radiator controller for approx. 7 seconds in order
to save energy.
Parameters 5 to 7 – Window function
In order to save energy the radiator controller closes the
radiator valve when you open a window resulting in a
sudden drop of the temperature.
When you close the window so that the temperature
rises the radiator controller opens the radiator valve
again.
If you should ever forget to close the window, the
radiator controller opens automatically after the set time
in order to ensure frost protection.
Parameter 8 – Valve stroke
The radiator controller operates with the optimum valve
stroke set in the factory.
If the entire valve stroke is to be used or if the valve does
not close completely, activate the full-stroke mode.
Parameter 9 – Temperature representation in the
display
• In the factory setting the set or programmed
temperature (Comfort temperature 1, 2 or the
Conserve temperature) is displayed.
• With the setting "measured temperature" the
measured room temperature is displayed. A
changeover to the set temperature is carried out
by turning the adjustment dial or pressing a button.
If required, the temperature can now be reset. The
display returns to the measured temperature after
approx. 3 seconds.
Parameter 12 – Optimisation function
Without optimisation (factory setting) the radiator
controller begins to raise or lower the room temperature
at the programmed time. In order to have the bathroom
warm at 7:00, the switching point must be preponed,
otherwise heating would start only at 7:00. Possibly the
switching point is preponed too much, so that heating
starts much earlier than actually needed.
With optimisation the room has already reached the
desired temperature at the programmed beginning since
the radiator controller has begun to raise or lower the
room temperature at an optimal time.
• Optimum start
The room is heated up at an optimum moment to
reach the programmed temperature.
• Optimum start/stop:
The room is heated up at an optimum moment and
cooled down earlier.
Switching point
Without
Optimisation
Optimum
Start
Optimum
Stop
Without
Optimisation
Switching point
°C
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Homexpert by Honeywell Rondostat Comfort plus HR30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Homexpert by Honeywell Rondostat Comfort plus HR30 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Homexpert by Honeywell Rondostat Comfort plus HR30

Homexpert by Honeywell Rondostat Comfort plus HR30 User Manual - German - 12 pages

Homexpert by Honeywell Rondostat Comfort plus HR30 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info