800570
19
Zoom out
Zoom in
Previous page
1/22
Next page
Q1B-CH-2000ST EN
6
8 ASSEMBLY
WARNING: Always check that the power supply corresponds to the voltage
on the rating name plate. Remove the power tool from the packaging. Do
not plug it into the electrical grid before assembly.
Never touch the nozzles during or immediately after use of the device. The
nozzles are very hot.
9 OPERATION
9.1 Switching ON/OFF
Always use with caution! Do NOT cover the ventilation openings during use
as it causes a risk of burns!
Never touch the hot nozzle!
9.2 Application tips
must be slid onto the burner nozzle in such a way that
the round small holes are located on the underside (this is the side where the stand is
located).
8.1 Assemble the extension handle
Slide the extension tube (5) into the device as far as possible; until it clicks into place (there is
only one way to do this).
pull the tube out of the device and the handle.
8.2 To install the nozzle:
The nozzles can easily be pushed over the hot air nozzle.
The protr must be slid as far as possible into the
slots of the burner nozzle. The nozzle must then be twisted approximately one centimetre
into the slot. Attention! The long side of the cap must be on top (this is the side where
the switch is located)!
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeTech Q1B-CH-2000ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeTech Q1B-CH-2000ST in the language / languages: English, Dutch as an attachment in your email.

The manual is 3.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info