Manual HomeMatic HmIPW-WTH-A (page 54 of 80) (English, German)

808733

Zoom out

Zoom in

1/80

Start-up

sary, personal safety equipment;

• Evaluation of measuring results;

• Selection of electrical installation material for safeguard-

ing shut-o conditions;

• IP protection types;

• Installation of electrical installation material;

• Type of supply network (TN system, IT system, TT sys-

tem) and the resulting connecting conditions (classical

zero balancing, protective earthing, required additional

measures etc.).

Permitted cable cross sections for connecting to the wall

thermostat are:

Rigid cable: 0.12-0.50 mm2

For reasons of electrical safety, only the following

cables must be used for connecting to the Home-

matic IP Wired bus:

• Telephone cable J-Y(ST)Y with 2 x 2 x 0.8

(= 0.5mm²) or 4 x 2 x 0.8 (= 0.5 mm²),

shielded, TP

• Ethernet installation cable S/FUTP, Type Cat5e or

higher with 2 x 2 x AWG22 (= 0.34 mm²) or

4 x 2 x AWG22 (= 0.34 mm²), shielded, TP

The shield (continuity wire) must be connected at

the bus connection of the Wired Access Point

(HmIPW-DRAP) to “–” (=GND). The shield may

not be connected to the wall thermostat.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIPW-WTH-A in the language / languages: English, German as an attachment in your email.

The manual is 11.35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HomeMatic HmIPW-WTH-A Manual

Product: