Manual HomeMatic HmIPW-SCTHD (page 40 of 52) (English, German)

808729

Zoom out

Zoom in

1/52

Start-up

nect and loosen the individual wires, press the

orange clamp using a small screwdriver.

• Place the mounting plate (E) in the ﬂush-mount-

ed box and fasten it to the ﬂush-mounted box us-

ing the screws supplied (see ﬁgure 4).

• Place the frame of your existing switch series or

the supplied clip-on frame (A) to the mounting

plate (see ﬁgure 5).

• Place the electronic unit (B) of the CO2 sensor

into the frame by fully snapping the connec-

tion pins (G) into the appropriate bracket of the

mounting plate (see ﬁgure 6+7).

5.3 Installation in multiple combinations

You can mount the CO2 sensor detector with the attach-

ment frame (A) provided or use it with frames of other

manufacturers as well as integrate the electronic unit

(B) into a multi-gang frame. For mounting with multiple

combinations, make sure that the mounting plate of the

CO2 sensor is aligned to the already ﬁxed mounting pla-

te/retaining ring. Frames of the following manufacturers

can be used:

Manufacturer Frame

Berker S.1, B.1, B.3, B.7

Busch Jaeger

carat*, future linear*, solo*, Busch-

axcent*, Busch-dynasty*, balance SI

ELSO Joy

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIPW-SCTHD in the language / languages: English, German as an attachment in your email.

The manual is 1.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HomeMatic HmIPW-SCTHD Manual

Product: