808556
36
Zoom out
Zoom in
Previous page
1/48
Next page
36
Start-up
The bore holes (J) can be used for installation
with a flush-mounting box.
Now drill the bore holes.
If you are working with a stone wall, drill the
marked 5 mm holes and insert the plugs supplied.
If you are working with a wooden wall, you can
pre-drill 1.5mm holes to make screws easier to
insert.
Use the supplied screws and plugs (K) to fasten
the mounting plate to the wall (see figure 4).
Attach the clip-on frame (A) to the mounting
plate.
Place the remote control (B) back into the frame
(see figure 1). Make sure that “TOP” and the ar-
rows on the back side point upwards and that the
clips on the mounting plate latch into the open-
ings on the remote control.
5.2.3 Installation in multiple combinations
You can mount the wall-mount remote control with the
attachment frame (A) provided or use it with frames of
other manufacturers as well as integrate the remote con-
trol (B) into a multi-gang frame. You can flexibly fix the
mounting plate (F) to the wall using adhesive strips or
screws. For mounting with multiple combinations, make
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-WRC2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-WRC2 in the language / languages: English, German as an attachment in your email.

The manual is 0.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HomeMatic HmIP-WRC2

HomeMatic HmIP-WRC2 User Manual - Dutch, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info