Manual HomeMatic HmIP-SMI55-A (page 49 of 53) (English, German)

808718

Zoom out

Zoom in

1/53

Restore factory settings

11 Restore factory settings

The factory settings of the device can be re-

stored. If you do this, you will lose all your set-

tings.

To restore the factory settings of the motion detector,

please proceed as follows:

• To remove the

electronic unit (B)

of the motion

detector from the frame, take hold of the sides

of the electronic unit and pull it out (see ﬁgure 6).

• Remove the batteries.

• Insert the batteries ensuring that the polarity is

correct (see ﬁgure 7) while pressing and holding

down the system button (E) for 4 seconds at the

same time, until the LED will quickly start ﬂashing

orange (see ﬁgure 5).

• Release the system button again.

• Press and hold down the system button again for

4 seconds, until the LED lights up green.

• Release the system button to ﬁnish the proce-

dure.

The device will perform a restart.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-SMI55-A in the language / languages: English, German as an attachment in your email.

The manual is 3.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HomeMatic HmIP-SMI55-A Manual

Product: