808726
42
Zoom out
Zoom in
Previous page
1/175
Next page
42
Installation
5.1.1 Mounting the radiator thermostat
In case of visible damage of the existing radiator, valve or
heating pipes, please contact a specialist.
Remove the old thermostat dial from your radiator valve (see section 3).
Rotate the thermostat dial to the maximum value (N) (anti-
clockwise). The thermostat dial then no longer presses against
the valve spigot, making it easier to remove.
There are dierent ways of fixing the position of the thermostat dial:
Union nut: Unscrew the union nut in an anticlockwise direction
(O). The thermostat dial can then be removed (P).
Snap-on fastenings: Thermostat dials that are fastened this way
can be detached by turning the fastener/union nut a little bit
counter-clockwise (O). The thermostat dial can then be removed
(P).
Compression fitting: The thermostat dial is held in place by a
mounting ring which is held together with a screw. Loosen this
screw and remove the thermostat dial from the valve (P).
Threaded connection with set screw: Loosen the set screw and
remove the thermostat dial (P).
After removing the old thermostat dial you can mount the Home-
maticIP Radiator Thermostat with the union nut (A) to the radiator
valve (see figure 4).
If required, you can use the supplied adapter for Danfoss RA valves
(see „5.1.1 Mounting the radiator thermostat“ on page 42) or the
supplied support ring (see „5.1.3 Support ring“ on page 44).
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-SK9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-SK9 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info