Manual HomeMatic HmIP-SK9 (page 39 of 175) (English, German, Dutch, French, Italian, Spanish)

808726

Zoom out

Zoom in

1/175

Teaching-in

4.1 Direct pairing

You can directly pair the Homematic IP Radiator Thermostat

– basic (HmIP-eTRV-B) to the Homematic IP Window /

Door Contact with magnet (HmIP-SWDM).

Please make sure you maintain a distance of at least 50cm

between the devices.

You can cancel the pairing procedure by brieﬂy pressing the

system button (D) again. This will be indicated by the device

LED (D) lighting up red.

To connect the radiator thermostat to the Homematic IP Window /

Door Contact with magnet, the pairing mode of both devices has to

be activated.

• Remove the insulation strip from the battery compartment of the

radiator thermostat (B) and the window / door contact (M).

• Press and hold down the system button of the radiator thermostat

(D) for at least 4 seconds to activate the pairing mode (see ﬁgure

2). The device LED (D) starts to ﬂash orange. Pairing mode remains

activated for 3 minutes.

• Press and hold down the system button of the window / door

contact with magnet (L) for at least 4 seconds to activate the

pairing mode (see ﬁg. 2). The device LED (L) starts to ﬂash orange.

The device LED lights up green to indicate that teaching-in has been

successful. If teaching-in failed, the device LED lights up red. Please

try again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-SK9 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HomeMatic HmIP-SK9 Manual

Product: