Manual HomeMatic HmIP-PSM-UK (page 15 of 42) (English, German)

808724

Zoom out

Zoom in

1/42

Troubleshooting

function. If the test is completed without errors, the plug-

gable switch and meter transmits a wireless telegram con-

taining its status information.

8 Troubleshooting

8.1 Command not conﬁrmed

If at least one receiver does not conﬁrm a command, the

device LED lights up red at the end of the failed trans-

mission process. The failed transmission may be caused

by radio interference (see “11 General information about

radio operation” on page 16). This may be caused be

the following:

• Receiver cannot be reached

• Receiver is unable to execute the command (load

failure, mechanical blockade, etc.)

• Receiver is defective

8.2 Duty cycle

The duty cycle is a legally regulated limit of the transmis-

sion time of devices in the 868 MHz range. The aim of

this regulation is to safeguard the operation of all devices

working in the 868 MHz range.

In the 868 MHz frequency range we use, the maximum

transmission time of any device is 1% of an hour (i.e. 36

seconds in an hour). Devices must cease transmission

when they reach the 1% limit until this time restriction

comes to an end. Homematic IP devices are designed

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-PSM-UK in the language / languages: English, German as an attachment in your email.

The manual is 0.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HomeMatic HmIP-PSM-UK Manual

Product: