808723
33
Zoom out
Zoom in
Previous page
1/61
Next page
33
Operation
6 Operation
After teaching-in and installing have been performed,
simple operations are available directly on the device.
• Press the system button (A) shortly to switch on
and o connected loads.
Improper usage or a defective installation (e.g.
low-quality or defective plugs or sockets) can
lead to overheating of the pluggable switch and
meter. The integrated temperature control auto-
matically switches o the load. The devices is
protected against overheating and secure opera-
tion is ensured. As soon as the temperature
reaches a non-critical value, you can switch on
the pluggable switch and meter again. Always
observe the permitted ambient temperature of
the device and, if necessary, have the installation
checked for possible error sources by an expert.
7 Behaviour after power recovery
After the device has been inserted to a socket or after
power recovery
the
pluggable switch and meter
performs
a self-test/restart (approx. 2 seconds). The device LED
flashes orange and green briefly (LED test display).
The
LED will flash if an error is detected during this test (see “8.3
Error codes and flashing sequences” on page 34). This is
repeated continuously and the device does not perform its
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-PSM-IT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-PSM-IT in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info