808540
37
Zoom out
Zoom in
Previous page
1/47
Next page
37
Start-up
power supply (see fig. 2).
Route the switched phase (C) to the consumer
(see fig. 2).
Fix the actuator to an appropriate flush-mounting
box. If required, you can remove the fixing lug (B).
Close the flush-mounting box using an
appropriate cover.
Switch the fuse of the power circuit on again, to
activate the teach-in mode of the device (see „5.3
Teaching-in“ on page 38).
5.2.2 Surface-mounting box installation
To install the switch actuator and meter in a surface-
mounting box, please proceed as follows:
Switch o the fuse of the power circuit.
Connect the actuator to L (E) and N (D) to obtain
power supply (see fig. 2).
Route the switched phase (C) to the consumer
(see fig. 2).
Fix the actuator to an appropriate surface-
mounting box (e.g. Abox 025 or Abox 040) (see
figure 3).
Fix the actuator to the holding mandrel using the
fixing lug.
Close the surface-mounting box using the cor-
responding cover.
Switch the fuse of the power circuit on again, to
activate the teach-in mode of the device (see „5.3
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-FSM16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-FSM16 in the language / languages: English, German as an attachment in your email.

The manual is 4.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HomeMatic HmIP-FSM16

HomeMatic HmIP-FSM16 User Manual - English, German - 2 pages

HomeMatic HmIP-FSM16 User Manual - Dutch - 2 pages

HomeMatic HmIP-FSM16 User Manual - French - 2 pages

HomeMatic HmIP-FSM16 User Manual - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info