808555
49
Zoom out
Zoom in
Previous page
1/74
Next page
49
Start-up
5.2 DIN rail mount
For mounting the floor heating actuator to a DIN rail,
please proceed as follows:
Place the floor heating actuator onto the DIN rail
(see figure 4).
Latch the floor heating actuator by pressing the
spring latches (G) upwards (see figure 4).
Make sure that the spring latches are completely
latched and that the device is seated solidly on
the rail.
6 Start-up
6.1 Installation instructions
Please read this entire section before starting to
install the device.
For installing the floor heating actuator into a
power distribution panel it has to be mounted in
accordance with VDE 0603, DIN 43871 (low-volt-
age sub-distribution board), DIN 18015-x. In this
case, the installation must be made on a mount-
ing rail (DIN rail) according to EN50022. Installa-
tion and wiring have to be performed according
to VDE 0100 (VDE 0100-410, VDE 0100-510 etc.).
Please consider the technical connection re-
quirements (TAB) of your energy supplier.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-FALMOT-C12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-FALMOT-C12 in the language / languages: English, German as an attachment in your email.

The manual is 1.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HomeMatic HmIP-FALMOT-C12

HomeMatic HmIP-FALMOT-C12 User Manual - English, German - 2 pages

HomeMatic HmIP-FALMOT-C12 User Manual - Dutch - 2 pages

HomeMatic HmIP-FALMOT-C12 User Manual - French - 2 pages

HomeMatic HmIP-FALMOT-C12 User Manual - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info