678139

HomeMatic HmIP-eTRV-C Manual

48
Zoom out
Zoom in
Previous page
1/60
Next page
48
Start-up
5.3 Adaption run
Once the batteries have been inserted, the motor
reserves the valve pin.
After the valve pins has been reversed completely (motor
no longer moves), the radiator thermostat can be moved
(see figure 6). An adaption run has to be performed in
order to adapt the device to the valve. To do this, please
proceed as follows:
• To start the adaption run, close the battery com-
partment (E) using the square key (see figure 2+3).
The adaption run is alternatively started 3 minutes
after reaching the valve pin end position.
Now, the radiator thermostat performs the adapting run.
After the adaption run, installation is completed and the
device can be individually configured and controlled.
If the adaption run was initiated prior to installation
or if it could not be fully performed, the device LED
(C) lights up red up to 10 times at intervals of 10
seconds. If the audible signalling device is activat
-
ed, it sounds parallel to the LED. By turning the bat-
tery compartment lock using the square key (see
figure 2), the motor moves back to the valve pin
end position.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-eTRV-C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-eTRV-C in the language / languages: English, German as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info