808536
55
Zoom out
Zoom in
Previous page
1/75
Next page
55
Start-up
thermostat head from the valve (3).
Threaded connection with set screw: Loosen the
set screw and remove the thermostat head (3).
After removing the old thermostat dial you can mount the
Homematic IP Radiator Thermostat with the union nut (A)
to the radiator valve (see figure 7).
If required, you can use the supplied adapter for Danfoss
RA valves (see “5.1.1 Direct pairing with a Homematic IP
device” on page 49) or the supplied support ring (see
“5.2.3 Support ring” on page 56).
5.2.2 Danfoss RA adapter
The provided adapter is required to attach to Danfoss RA
valves. The RA- Adapter has been manufactured with pre-
tension in order to provide better fit. Use a screwdriver
during installation if necessary and bend the adapter
open slightly in the vicinity of the screw (see figure 8).
The Danfoss valve bodies have elongated notches around
their circumference, which also ensure that the adapter is
properly seated when it snaps on.
During installation, please ensure that the pins
inside the adapter are lined up with the notches
on the valve. Ensure that a suitable adapter for the
valve is properly clipped on.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-eTRV-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-eTRV-B in the language / languages: English, German as an attachment in your email.

The manual is 7.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HomeMatic HmIP-eTRV-B

HomeMatic HmIP-eTRV-B User Manual - English, German - 2 pages

HomeMatic HmIP-eTRV-B User Manual - Dutch - 2 pages

HomeMatic HmIP-eTRV-B User Manual - French - 2 pages

HomeMatic HmIP-eTRV-B User Manual - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info